Loading Documentation/devicetree/bindings/arm/msm/msm.txt +7 −0 Original line number Diff line number Diff line Loading @@ -112,6 +112,12 @@ SoCs: - QCS6125 compatible = "qcom,qcs6125" - SA2145P compatible = "qcom,sa2145p" - SA2150P compatible = "qcom,sa2150p" Generic board variants: - CDP device: Loading Loading @@ -229,6 +235,7 @@ compatible = "qcom,sa6155p-adp-air" compatible = "qcom,qcs405-rumi" compatible = "qcom,qcs405-iot" compatible = "qcom,sa2150p-ccard" compatible = "qcom,sa2145p-ccard" compatible = "qcom,qcs403-iot" compatible = "qcom,qcs401-iot" compatible = "qcom,qcs404-iot" Loading arch/arm64/boot/dts/qcom/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -102,6 +102,8 @@ dtb-$(CONFIG_ARCH_QCS405) += qcs405-iot-sku1.dtb \ qcs405-iot-sku12.dtb \ qcs407-iot-sku12.dtb \ sa2150p-ccard-emmc.dtb \ sa2145p-ccard-nand-dc.dtb \ sa2150p-ccard-nand-dc.dtb \ sa2150p-ccard-nand.dtb \ qcs405-iot-sku13.dtb \ qcs407-iot-sku13.dtb \ Loading arch/arm64/boot/dts/qcom/sa2145p-ccard-nand-dc.dts 0 → 100644 +38 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sa2145p-ccard.dtsi" / { model = "Qualcomm Technologies, Inc. SA2145P CCARD NAND DC"; compatible = "qcom,sa2145p-ccard", "qcom,qcs403", "qcom,sa2145p", "qcom,ccard"; qcom,board-id = <25 2>, <25 0x102>; }; &qnand_1 { status = "okay"; }; &sdhc_1 { status = "disabled"; }; &blsp1_uart1_hs { status = "ok"; }; &blsp1_uart4_hs { status = "disabled"; }; arch/arm64/boot/dts/qcom/sa2145p-ccard.dtsi 0 → 100644 +296 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "qcs403.dtsi" &tlmm { pinctrl-0 = <&status_gpio>; pinctrl-names = "default"; status_gpio: status_gpio { ap2mdm_status { pins = "gpio80"; function = "gpio"; drive-strength = <8>; bias-pull-up; output-high; }; }; }; &pcie0_perst_default { mux { pins = "gpio107"; function = "gpio"; }; config { pins = "gpio107"; drive-strength = <2>; bias-disable; }; }; &pcie0_wake_default { mux { pins = "gpio115"; function = "gpio"; }; config { pins = "gpio115"; drive-strength = <2>; bias-pull-down; }; }; &usb3_id_det_default { mux { pins = "gpio113"; function = "gpio"; }; config { pins = "gpio113"; drive-strength = <2>; bias-pull-up; input-enable; }; }; &spi_1 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &smb1351_otg_supply { status = "disabled"; }; &cnss_sdio { status = "disabled"; }; &spi_2 { status = "okay"; can-controller@0 { compatible = "qcom,nxp,mpc5746c"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <34 0>; spi-max-frequency = <5000000>; qcom,clk-freq-mhz = <40000000>; qcom,max-can-channels = <2>; qcom,bits-per-word = <8>; qcom,support-can-fd; }; }; &spi_6 { status = "okay"; spidev0: spidev@0 { compatible = "qcom,spi-msm-codec-slave"; reg = <0>; spi-max-frequency = <50000000>; }; }; &i2c_5 { status = "okay"; qcom,clk-freq-out = <100000>; }; &soc { gpio_keys { status = "disabled"; }; vreg_emac_phy: emac_phy_regulator { compatible = "regulator-fixed"; regulator-name = "emac_phy"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-enable-ramp-delay = <100>; gpio = <&tlmm 92 GPIO_ACTIVE_HIGH>; enable-active-high; }; vreg_rgmii_io_pads: rgmii_io_pads_regulator { compatible = "regulator-fixed"; regulator-name = "rgmii_io_pads"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <100>; gpio = <&tlmm 15 GPIO_ACTIVE_HIGH>; enable-active-high; }; usb2_extcon: usb2_extcon { compatible = "linux,extcon-usb-gpio"; id-gpio = <&tlmm 53 GPIO_ACTIVE_HIGH>; vbus-gpio = <&tlmm 116 GPIO_ACTIVE_HIGH>; vbus-out-gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_default &usb2_id_det_default &usb2_vbus_boost_default>; }; pps { compatible = "pps-gpio"; gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; status = "okay"; }; qmi-tmd-devices { adsp { qcom,instance-id = <0x1>; adsp_vdd: adsp-vdd { qcom,qmi-dev-name = "cpuv_restriction_cold"; #cooling-cells = <2>; }; }; }; }; &thermal_zones { aoss-lowf { cooling-maps { adsp_vdd_cdev { trip = <&aoss_lowf>; cooling-device = <&adsp_vdd 0 0>; }; }; }; }; &usb3 { qcom,ignore-wakeup-src-in-hostmode; }; &usb3_extcon { id-gpio = <&tlmm 113 GPIO_ACTIVE_HIGH>; }; &usb2s { extcon = <&usb2_extcon>; }; ðqos_hw { status = "okay"; vreg_emac_phy-supply = <&vreg_emac_phy>; vreg_rgmii_io_pads-supply = <&vreg_rgmii_io_pads>; rxc-skew-ps = <0>; pinctrl-names = "dev-emac-mdc", "dev-emac-mdio", "dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state", "dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state", "dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state", "dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state", "dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state", "dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state", "dev-emac-phy_intr", "dev-emac-phy_reset_state"; pinctrl-15 = <&emac_phy_reset_state>; }; &emac_hw { status = "okay"; vreg_emac_phy-supply = <&vreg_emac_phy>; vreg_rgmii_io_pads-supply = <&vreg_rgmii_io_pads>; qcom,phy-reset-delay-msecs = <10>; rxc-skew-ps = <0>; pinctrl-names = "dev-emac-mdc", "dev-emac-mdio", "dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state", "dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state", "dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state", "dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state", "dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state", "dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state", "dev-emac-phy_intr", "dev-emac-phy_reset_state"; pinctrl-15 = <&emac_phy_reset_state>; }; &pcie0 { pinctrl-0 = <&pcie0_perst_default &pcie0_wake_default>; perst-gpio = <&tlmm 107 0>; wake-gpio = <&tlmm 115 0>; }; &sdhc_2 { /delete-property/ qcom,nonhotplug; /delete-property/ qcom,nonremovable; vdd-io-supply = <&pms405_l11>; qcom,vdd-io-voltage-level = <2950000 2950000>; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; cd-gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; status = "ok"; }; &gpu_bw_tbl { status = "disabled"; }; &gpubw { status = "disabled"; }; &msm_gpu { status = "disabled"; }; &kgsl_msm_iommu { status = "disabled"; }; &rpm_bus { rpm-regulator-ldoa1 { status = "disabled"; pms405_l1: regulator-l1 { status = "disabled"; }; }; rpm-regulator-ldoa2 { status = "disabled"; pms405_l2: regulator-l2 { status = "disabled"; }; }; rpm-regulator-ldoa7 { status = "disabled"; pms405_l7: regulator-l7 { status = "disabled"; }; }; rpm-regulator-ldoa10 { status = "disabled"; pms405_l10: regulator-l10 { status = "disabled"; }; }; }; arch/arm64/boot/dts/qcom/sa2150p-ccard-nand-dc.dts 0 → 100644 +106 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sa2150p-ccard.dtsi" / { model = "Qualcomm Technologies, Inc. SA2150P CCARD NAND DC"; compatible = "qcom,sa2150p-ccard", "qcom,qcs405", "qcom,sa2150p", "qcom,ccard"; qcom,board-id = <25 2>, <25 0x102>; cpus { /delete-node/ cpu@102; /delete-node/ cpu@103; cpu-map { cluster0 { /delete-node/ core2; /delete-node/ core3; }; }; }; }; &soc { cpuss_dump { /delete-node/ qcom,l1_i_cache102; /delete-node/ qcom,l1_i_cache103; /delete-node/ qcom,l1_d_cache102; /delete-node/ qcom,l1_d_cache103; }; qcom,spm@b012000 { qcom,cpu-vctl-list = <&CPU0 &CPU1>; }; qcom,lpm-levels { qcom,pm-cluster@0{ qcom,pm-cpu { qcom,cpu = <&CPU0 &CPU1>; }; }; }; /delete-node/ cti@61ba000; /delete-node/ cti@61bb000; /delete-node/ etm@61be000; /delete-node/ etm@61bf000; funnel@61a1000 { ports { /delete-node/ port@3; /delete-node/ port@4; }; }; /delete-node/ qcom,cpu0-computemon; cpu0_computemon: qcom,cpu0-computemon { compatible = "qcom,arm-cpu-mon"; qcom,cpulist = <&CPU0 &CPU1>; qcom,target-dev = <&cpu0_cpu_ddr_latfloor>; qcom,core-dev-table = < 1094400 MHZ_TO_MBPS( 297, 8) >, < 1248000 MHZ_TO_MBPS( 597, 8) >, < 1401600 MHZ_TO_MBPS( 710, 8) >; }; }; &thermal_zones { cpuss-max-step { cooling-maps { /delete-node/ cpu2_cdev; /delete-node/ cpu3_cdev; }; }; /delete-node/ cpuss-2-step; /delete-node/ cpuss-3-step; }; &qnand_1 { status = "okay"; }; &sdhc_1 { status = "disabled"; }; &blsp1_uart1_hs { status = "ok"; }; &blsp1_uart4_hs { status = "disabled"; }; Loading
Documentation/devicetree/bindings/arm/msm/msm.txt +7 −0 Original line number Diff line number Diff line Loading @@ -112,6 +112,12 @@ SoCs: - QCS6125 compatible = "qcom,qcs6125" - SA2145P compatible = "qcom,sa2145p" - SA2150P compatible = "qcom,sa2150p" Generic board variants: - CDP device: Loading Loading @@ -229,6 +235,7 @@ compatible = "qcom,sa6155p-adp-air" compatible = "qcom,qcs405-rumi" compatible = "qcom,qcs405-iot" compatible = "qcom,sa2150p-ccard" compatible = "qcom,sa2145p-ccard" compatible = "qcom,qcs403-iot" compatible = "qcom,qcs401-iot" compatible = "qcom,qcs404-iot" Loading
arch/arm64/boot/dts/qcom/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -102,6 +102,8 @@ dtb-$(CONFIG_ARCH_QCS405) += qcs405-iot-sku1.dtb \ qcs405-iot-sku12.dtb \ qcs407-iot-sku12.dtb \ sa2150p-ccard-emmc.dtb \ sa2145p-ccard-nand-dc.dtb \ sa2150p-ccard-nand-dc.dtb \ sa2150p-ccard-nand.dtb \ qcs405-iot-sku13.dtb \ qcs407-iot-sku13.dtb \ Loading
arch/arm64/boot/dts/qcom/sa2145p-ccard-nand-dc.dts 0 → 100644 +38 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sa2145p-ccard.dtsi" / { model = "Qualcomm Technologies, Inc. SA2145P CCARD NAND DC"; compatible = "qcom,sa2145p-ccard", "qcom,qcs403", "qcom,sa2145p", "qcom,ccard"; qcom,board-id = <25 2>, <25 0x102>; }; &qnand_1 { status = "okay"; }; &sdhc_1 { status = "disabled"; }; &blsp1_uart1_hs { status = "ok"; }; &blsp1_uart4_hs { status = "disabled"; };
arch/arm64/boot/dts/qcom/sa2145p-ccard.dtsi 0 → 100644 +296 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include "qcs403.dtsi" &tlmm { pinctrl-0 = <&status_gpio>; pinctrl-names = "default"; status_gpio: status_gpio { ap2mdm_status { pins = "gpio80"; function = "gpio"; drive-strength = <8>; bias-pull-up; output-high; }; }; }; &pcie0_perst_default { mux { pins = "gpio107"; function = "gpio"; }; config { pins = "gpio107"; drive-strength = <2>; bias-disable; }; }; &pcie0_wake_default { mux { pins = "gpio115"; function = "gpio"; }; config { pins = "gpio115"; drive-strength = <2>; bias-pull-down; }; }; &usb3_id_det_default { mux { pins = "gpio113"; function = "gpio"; }; config { pins = "gpio113"; drive-strength = <2>; bias-pull-up; input-enable; }; }; &spi_1 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &smb1351_otg_supply { status = "disabled"; }; &cnss_sdio { status = "disabled"; }; &spi_2 { status = "okay"; can-controller@0 { compatible = "qcom,nxp,mpc5746c"; reg = <0>; interrupt-parent = <&tlmm>; interrupts = <34 0>; spi-max-frequency = <5000000>; qcom,clk-freq-mhz = <40000000>; qcom,max-can-channels = <2>; qcom,bits-per-word = <8>; qcom,support-can-fd; }; }; &spi_6 { status = "okay"; spidev0: spidev@0 { compatible = "qcom,spi-msm-codec-slave"; reg = <0>; spi-max-frequency = <50000000>; }; }; &i2c_5 { status = "okay"; qcom,clk-freq-out = <100000>; }; &soc { gpio_keys { status = "disabled"; }; vreg_emac_phy: emac_phy_regulator { compatible = "regulator-fixed"; regulator-name = "emac_phy"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; regulator-enable-ramp-delay = <100>; gpio = <&tlmm 92 GPIO_ACTIVE_HIGH>; enable-active-high; }; vreg_rgmii_io_pads: rgmii_io_pads_regulator { compatible = "regulator-fixed"; regulator-name = "rgmii_io_pads"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-enable-ramp-delay = <100>; gpio = <&tlmm 15 GPIO_ACTIVE_HIGH>; enable-active-high; }; usb2_extcon: usb2_extcon { compatible = "linux,extcon-usb-gpio"; id-gpio = <&tlmm 53 GPIO_ACTIVE_HIGH>; vbus-gpio = <&tlmm 116 GPIO_ACTIVE_HIGH>; vbus-out-gpio = <&tlmm 108 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_det_default &usb2_id_det_default &usb2_vbus_boost_default>; }; pps { compatible = "pps-gpio"; gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; status = "okay"; }; qmi-tmd-devices { adsp { qcom,instance-id = <0x1>; adsp_vdd: adsp-vdd { qcom,qmi-dev-name = "cpuv_restriction_cold"; #cooling-cells = <2>; }; }; }; }; &thermal_zones { aoss-lowf { cooling-maps { adsp_vdd_cdev { trip = <&aoss_lowf>; cooling-device = <&adsp_vdd 0 0>; }; }; }; }; &usb3 { qcom,ignore-wakeup-src-in-hostmode; }; &usb3_extcon { id-gpio = <&tlmm 113 GPIO_ACTIVE_HIGH>; }; &usb2s { extcon = <&usb2_extcon>; }; ðqos_hw { status = "okay"; vreg_emac_phy-supply = <&vreg_emac_phy>; vreg_rgmii_io_pads-supply = <&vreg_rgmii_io_pads>; rxc-skew-ps = <0>; pinctrl-names = "dev-emac-mdc", "dev-emac-mdio", "dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state", "dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state", "dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state", "dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state", "dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state", "dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state", "dev-emac-phy_intr", "dev-emac-phy_reset_state"; pinctrl-15 = <&emac_phy_reset_state>; }; &emac_hw { status = "okay"; vreg_emac_phy-supply = <&vreg_emac_phy>; vreg_rgmii_io_pads-supply = <&vreg_rgmii_io_pads>; qcom,phy-reset-delay-msecs = <10>; rxc-skew-ps = <0>; pinctrl-names = "dev-emac-mdc", "dev-emac-mdio", "dev-emac-rgmii_txd0_state", "dev-emac-rgmii_txd1_state", "dev-emac-rgmii_txd2_state", "dev-emac-rgmii_txd3_state", "dev-emac-rgmii_txc_state", "dev-emac-rgmii_tx_ctl_state", "dev-emac-rgmii_rxd0_state", "dev-emac-rgmii_rxd1_state", "dev-emac-rgmii_rxd2_state", "dev-emac-rgmii_rxd3_state", "dev-emac-rgmii_rxc_state", "dev-emac-rgmii_rx_ctl_state", "dev-emac-phy_intr", "dev-emac-phy_reset_state"; pinctrl-15 = <&emac_phy_reset_state>; }; &pcie0 { pinctrl-0 = <&pcie0_perst_default &pcie0_wake_default>; perst-gpio = <&tlmm 107 0>; wake-gpio = <&tlmm 115 0>; }; &sdhc_2 { /delete-property/ qcom,nonhotplug; /delete-property/ qcom,nonremovable; vdd-io-supply = <&pms405_l11>; qcom,vdd-io-voltage-level = <2950000 2950000>; pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; cd-gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; status = "ok"; }; &gpu_bw_tbl { status = "disabled"; }; &gpubw { status = "disabled"; }; &msm_gpu { status = "disabled"; }; &kgsl_msm_iommu { status = "disabled"; }; &rpm_bus { rpm-regulator-ldoa1 { status = "disabled"; pms405_l1: regulator-l1 { status = "disabled"; }; }; rpm-regulator-ldoa2 { status = "disabled"; pms405_l2: regulator-l2 { status = "disabled"; }; }; rpm-regulator-ldoa7 { status = "disabled"; pms405_l7: regulator-l7 { status = "disabled"; }; }; rpm-regulator-ldoa10 { status = "disabled"; pms405_l10: regulator-l10 { status = "disabled"; }; }; };
arch/arm64/boot/dts/qcom/sa2150p-ccard-nand-dc.dts 0 → 100644 +106 −0 Original line number Diff line number Diff line /* Copyright (c) 2020, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sa2150p-ccard.dtsi" / { model = "Qualcomm Technologies, Inc. SA2150P CCARD NAND DC"; compatible = "qcom,sa2150p-ccard", "qcom,qcs405", "qcom,sa2150p", "qcom,ccard"; qcom,board-id = <25 2>, <25 0x102>; cpus { /delete-node/ cpu@102; /delete-node/ cpu@103; cpu-map { cluster0 { /delete-node/ core2; /delete-node/ core3; }; }; }; }; &soc { cpuss_dump { /delete-node/ qcom,l1_i_cache102; /delete-node/ qcom,l1_i_cache103; /delete-node/ qcom,l1_d_cache102; /delete-node/ qcom,l1_d_cache103; }; qcom,spm@b012000 { qcom,cpu-vctl-list = <&CPU0 &CPU1>; }; qcom,lpm-levels { qcom,pm-cluster@0{ qcom,pm-cpu { qcom,cpu = <&CPU0 &CPU1>; }; }; }; /delete-node/ cti@61ba000; /delete-node/ cti@61bb000; /delete-node/ etm@61be000; /delete-node/ etm@61bf000; funnel@61a1000 { ports { /delete-node/ port@3; /delete-node/ port@4; }; }; /delete-node/ qcom,cpu0-computemon; cpu0_computemon: qcom,cpu0-computemon { compatible = "qcom,arm-cpu-mon"; qcom,cpulist = <&CPU0 &CPU1>; qcom,target-dev = <&cpu0_cpu_ddr_latfloor>; qcom,core-dev-table = < 1094400 MHZ_TO_MBPS( 297, 8) >, < 1248000 MHZ_TO_MBPS( 597, 8) >, < 1401600 MHZ_TO_MBPS( 710, 8) >; }; }; &thermal_zones { cpuss-max-step { cooling-maps { /delete-node/ cpu2_cdev; /delete-node/ cpu3_cdev; }; }; /delete-node/ cpuss-2-step; /delete-node/ cpuss-3-step; }; &qnand_1 { status = "okay"; }; &sdhc_1 { status = "disabled"; }; &blsp1_uart1_hs { status = "ok"; }; &blsp1_uart4_hs { status = "disabled"; };
