Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit dac63a5f authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Shawn Guo
Browse files

ARM: mxs: dt: cfa10049: make hogpins grabbed by respective drivers 



Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent 49406316

arch/arm/boot/dts/imx28-cfa10049.dts

+63 −10
Original line number Diff line number Diff line
@@ -22,32 +22,62 @@ 
	apb@80000000 {

		apbh@80000000 {

			pinctrl@80018000 {

				pinctrl-names = "default", "default";

				pinctrl-1 = <&hog_pins_cfa10049

					&hog_pins_cfa10049_pullup>;



				hog_pins_cfa10049: hog-10049@0 {

				usb_pins_cfa10049: usb-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

				};



				i2cmux_pins_cfa10049: i2cmux-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */

						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

				};



				mac0_pins_cfa10049: mac0-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */

						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <0>;

				};



				hog_pins_cfa10049_pullup: hog-10049-pullup@0 {

				pca_pins_cfa10049: pca-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

				};



				rotary_pins_cfa10049: rotary-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */

						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

				};



				rotary_btn_pins_cfa10049: rotary-btn-10049@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */

						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;
@@ -60,6 +90,7 @@ 
						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */

						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */

						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */

						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */

					>;

					fsl,drive-strength = <1>;

					fsl,voltage = <1>;
@@ -120,6 +151,16 @@ 
					fsl,pull-up = <0>;

				};



				lcdif_pins_cfa10049_pullup: lcdif-10049-pullup@0 {

					reg = <0>;

					fsl,pinmux-ids = <

						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */

					>;

					fsl,drive-strength = <0>;

					fsl,voltage = <1>;

					fsl,pull-up = <1>;

				};



				w1_gpio_pins: w1-gpio@0 {

					reg = <0>;

					fsl,pinmux-ids = <
@@ -134,7 +175,8 @@ 
			lcdif@80030000 {

				pinctrl-names = "default";

				pinctrl-0 = <&lcdif_18bit_pins_cfa10049

					     &lcdif_pins_cfa10049>;

					     &lcdif_pins_cfa10049

					     &lcdif_pins_cfa10049_pullup>;

				display = <&display>;

				status = "okay";
@@ -181,6 +223,8 @@ 
				compatible = "i2c-mux-gpio";

				#address-cells = <1>;

				#size-cells = <0>;

				pinctrl-names = "default";

				pinctrl-0 = <&i2cmux_pins_cfa10049>;

				mux-gpios = <&gpio1 22 0 &gpio1 23 0>;

				i2c-parent = <&i2c1>;
@@ -203,6 +247,8 @@ 


					pca9555: pca9555@20 {

						compatible = "nxp,pca9555";

						pinctrl-names = "default";

						pinctrl-0 = <&pca_pins_cfa10049>;

						interrupt-parent = <&gpio2>;

						interrupts = <19 0x2>;

						gpio-controller;
@@ -239,6 +285,8 @@ 


		reg_usb1_vbus: usb1_vbus {

			compatible = "regulator-fixed";

			pinctrl-names = "default";

			pinctrl-0 = <&usb_pins_cfa10049>;

			regulator-name = "usb1_vbus";

			regulator-min-microvolt = <5000000>;

			regulator-max-microvolt = <5000000>;
@@ -250,7 +298,8 @@ 
		mac0: ethernet@800f0000 {

			phy-mode = "rmii";

			pinctrl-names = "default";

			pinctrl-0 = <&mac0_pins_a>;

			pinctrl-0 = <&mac0_pins_a

				&mac0_pins_cfa10049>;

			phy-reset-gpios = <&gpio2 21 0>;

			phy-reset-duration = <100>;

			status = "okay";
@@ -320,6 +369,8 @@ 


	gpio_keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&rotary_btn_pins_cfa10049>;

		#address-cells = <1>;

		#size-cells = <0>;
@@ -333,6 +384,8 @@ 


	rotary {

		compatible = "rotary-encoder";

		pinctrl-names = "default";

		pinctrl-0 = <&rotary_pins_cfa10049>;

		gpios = <&gpio3 24 1>, <&gpio3 25 1>;

		linux,axis = <1>; /* REL_Y */

		rotary-encoder,relative-axis;