Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cc34eb9f authored by harigovi's avatar harigovi Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: add cmd mode panel support 



Add support for rm69299 visionox amoled
command mode for atoll target.

Change-Id: I82804179d1f1ec7aadc52d6eb56d295c45ebc150
Signed-off-by: default avatarharigovi <harigovi@codeaurora.org>
parent 65119ded

arch/arm64/boot/dts/qcom/atoll-idp.dtsi

+9 −0
Original line number Diff line number Diff line
@@ -245,6 +245,15 @@ 
	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;

};



&dsi_rm69299_visionox_amoled_cmd {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;

};



&qupv3_se0_i2c {

	status = "ok";

	qcom,clk-freq-out = <1000000>;

arch/arm64/boot/dts/qcom/atoll-sde-display.dtsi

+25 −1
Original line number Diff line number Diff line
@@ -11,6 +11,7 @@ 
 */



#include "dsi-panel-rm69299-visionox-amoled-fhd-plus-video.dtsi"

#include "dsi-panel-rm69299-visionox-amoled-fhd-plus-cmd.dtsi"

#include <dt-bindings/clock/mdss-10nm-pll-clk.h>



&soc {
@@ -95,6 +96,15 @@ 
		qcom,dsi-panel = <&dsi_rm69299_visionox_amoled_video>;

	};



	dsi_rm69299_visionox_amoled_cmd_display: qcom,dsi-display@1 {

		label = "dsi_rm69299_visionox_amoled_cmd_display";

		qcom,display-type = "primary";

		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;

		qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";

		qcom,dsi-panel = <&dsi_rm69299_visionox_amoled_cmd>;

	};



	sde_dsi: qcom,dsi-display {

		compatible = "qcom,dsi-display";
@@ -125,7 +135,8 @@ 
		ibb-supply = <&lcdb_ncp_vreg>;



		qcom,dsi-display-list =

			<&dsi_rm69299_visionox_amoled_vid_display>;

			<&dsi_rm69299_visionox_amoled_vid_display

			&dsi_rm69299_visionox_amoled_cmd_display>;

	};



	sde_wb: qcom,wb-display@0 {
@@ -170,3 +181,16 @@ 
		};

	};

};



&dsi_rm69299_visionox_amoled_cmd {

	qcom,mdss-dsi-t-clk-post = <0x0E>;

	qcom,mdss-dsi-t-clk-pre = <0x31>;

	qcom,mdss-dsi-display-timings {

		timing@0{

			qcom,mdss-dsi-panel-phy-timings = [00 20 08 08 24 23 08

				08 05 02 04 00];

			qcom,display-topology = <1 0 1>;

			qcom,default-topology-index = <0>;

		};

	};

};

arch/arm64/boot/dts/qcom/dsi-panel-rm69299-visionox-amoled-fhd-plus-cmd.dtsi

0 → 100644
+73 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_rm69299_visionox_amoled_cmd:

		qcom,mdss_dsi_rm69299_visionox_amoled_cmd {

		qcom,mdss-dsi-panel-name =

		"rm69299 amoled fhd+ cmd mode dsi visionox panel";

		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-color-order = "rgb_swap_rgb";

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-h-sync-pulse = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-lane-map = "lane_map_0123";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-tx-eot-append;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-lane-3-state;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-lp11-init;

		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;

		qcom,mdss-dsi-te-pin-select = <1>;

		qcom,mdss-dsi-wr-mem-start = <0x2c>;

		qcom,mdss-dsi-wr-mem-continue = <0x3c>;

		qcom,mdss-dsi-te-dcs-command = <1>;

		qcom,mdss-dsi-te-check-enable;

		qcom,mdss-dsi-te-using-te-pin;

		qcom,mdss-dsi-display-timings {

			timing@0 {

				qcom,mdss-dsi-panel-width = <1080>;

				qcom,mdss-dsi-panel-height = <2248>;

				qcom,mdss-dsi-h-front-porch = <26>;

				qcom,mdss-dsi-h-back-porch = <36>;

				qcom,mdss-dsi-h-pulse-width = <2>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <4>;

				qcom,mdss-dsi-v-front-porch = <56>;

				qcom,mdss-dsi-v-pulse-width = <4>;

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,mdss-dsi-on-command = [

					39 01 00 00 00 00 02 FE 00

					39 01 00 00 00 00 02 C2 08

					39 01 00 00 00 00 02 35 00

					39 01 00 00 00 00 02 51 FF

					05 01 00 00 96 00 02 11 00

					05 01 00 00 32 00 02 29 00];

				qcom,mdss-dsi-off-command = [

					05 01 00 00 32 00 02 28 00

					05 01 00 00 96 00 02 10 00];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

			};

		};

	};

};