Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit cbcd2a4c authored by Randy Dunlap's avatar Randy Dunlap Committed by David S. Miller
Browse files

[NET]: Improve presentation of networking driver families. 



Suggestion from Sam Ravnborg <sam@ravnborg.org>

It causes all driver families to be displayed aligned immediately under the
main network drivers heading (in menuconfig/xconfig/gconfig) instead of
not being subordinate to (i.e., not indented) the Network device support
heading at all.
The improved network driver families are:
  token ring, wireless, PCMCIA, WAN, ATM, and S390.

Signed-off-by: default avatarRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent eaa1c5d0

drivers/net/Kconfig

+18 −20
Original line number Diff line number Diff line
@@ -23,9 +23,12 @@ config NETDEVICES 


	  If unsure, say Y.



# All the following symbols are dependent on NETDEVICES - do not repeat

# that for each of the symbols.

if NETDEVICES



config DUMMY

	tristate "Dummy net driver support"

	depends on NETDEVICES

	---help---

	  This is essentially a bit-bucket device (i.e. traffic you send to

	  this device is consigned into oblivion) with a configurable IP
@@ -45,7 +48,6 @@ config DUMMY 


config BONDING

	tristate "Bonding driver support"

	depends on NETDEVICES

	depends on INET

	---help---

	  Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
@@ -63,7 +65,6 @@ config BONDING 


config EQUALIZER

	tristate "EQL (serial line load balancing) support"

	depends on NETDEVICES

	---help---

	  If you have two serial connections to some other computer (this

	  usually requires two modems and two telephone lines) and you use
@@ -83,7 +84,6 @@ config EQUALIZER 


config TUN

	tristate "Universal TUN/TAP device driver support"

	depends on NETDEVICES

	select CRC32

	---help---

	  TUN/TAP provides packet reception and transmission for user space
@@ -107,7 +107,7 @@ config TUN 


config NET_SB1000

	tristate "General Instruments Surfboard 1000"

	depends on NETDEVICES && PNP

	depends on PNP

	---help---

	  This is a driver for the General Instrument (also known as

	  NextLevel) SURFboard 1000 internal
@@ -129,16 +129,14 @@ config NET_SB1000 


	  If you don't have this card, of course say N.



if NETDEVICES

	source "drivers/net/arcnet/Kconfig"

endif



#

#	Ethernet

#



menu "Ethernet (10 or 100Mbit)"

	depends on NETDEVICES && !UML

	depends on !UML



config NET_ETHERNET

	bool "Ethernet (10 or 100Mbit)"
@@ -1137,7 +1135,7 @@ config IBMLANA 


config IBMVETH

	tristate "IBM LAN Virtual Ethernet support"

	depends on NETDEVICES && NET_ETHERNET && PPC_PSERIES

	depends on NET_ETHERNET && PPC_PSERIES

	---help---

	  This driver supports virtual ethernet adapters on newer IBM iSeries

	  and pSeries systems.
@@ -1760,7 +1758,7 @@ endmenu 
#



menu "Ethernet (1000 Mbit)"

	depends on NETDEVICES && !UML

	depends on !UML



config ACENIC

	tristate "Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support"
@@ -2091,7 +2089,7 @@ endmenu 
#



menu "Ethernet (10000 Mbit)"

	depends on NETDEVICES && !UML

	depends on !UML



config IXGB

	tristate "Intel(R) PRO/10GbE support"
@@ -2186,11 +2184,11 @@ source "drivers/s390/net/Kconfig" 


config ISERIES_VETH

	tristate "iSeries Virtual Ethernet driver support"

	depends on NETDEVICES && PPC_ISERIES

	depends on PPC_ISERIES



config FDDI

	bool "FDDI driver support"

	depends on NETDEVICES && (PCI || EISA)

	depends on (PCI || EISA)

	help

	  Fiber Distributed Data Interface is a high speed local area network

	  design; essentially a replacement for high speed Ethernet. FDDI can
@@ -2239,7 +2237,7 @@ config SKFP 


config HIPPI

	bool "HIPPI driver support (EXPERIMENTAL)"

	depends on NETDEVICES && EXPERIMENTAL && INET && PCI

	depends on EXPERIMENTAL && INET && PCI

	help

	  HIgh Performance Parallel Interface (HIPPI) is a 800Mbit/sec and

	  1600Mbit/sec dual-simplex switched or point-to-point network. HIPPI
@@ -2271,7 +2269,7 @@ config ROADRUNNER_LARGE_RINGS 


config PLIP

	tristate "PLIP (parallel port) support"

	depends on NETDEVICES && PARPORT

	depends on PARPORT

	---help---

	  PLIP (Parallel Line Internet Protocol) is used to create a

	  reasonably fast mini network consisting of two (or, rarely, more)
@@ -2307,7 +2305,6 @@ config PLIP 


config PPP

	tristate "PPP (point-to-point protocol) support"

	depends on NETDEVICES

	---help---

	  PPP (Point to Point Protocol) is a newer and better SLIP.  It serves

	  the same purpose: sending Internet traffic over telephone (and other
@@ -2443,7 +2440,6 @@ config PPPOATM 


config SLIP

	tristate "SLIP (serial line) support"

	depends on NETDEVICES

	---help---

	  Say Y if you intend to use SLIP or CSLIP (compressed SLIP) to

	  connect to your Internet service provider or to connect to some
@@ -2510,7 +2506,7 @@ config SLIP_MODE_SLIP6 


config NET_FC

	bool "Fibre Channel driver support"

	depends on NETDEVICES && SCSI && PCI

	depends on SCSI && PCI

	help

	  Fibre Channel is a high speed serial protocol mainly used to connect

	  large storage devices to the computer; it is compatible with and
@@ -2523,7 +2519,7 @@ config NET_FC 


config SHAPER

	tristate "Traffic Shaper (EXPERIMENTAL)"

	depends on NETDEVICES && EXPERIMENTAL

	depends on EXPERIMENTAL

	---help---

	  The traffic shaper is a virtual network device that allows you to

	  limit the rate of outgoing data flow over some other network device.
@@ -2544,11 +2540,13 @@ config SHAPER 


config NETCONSOLE

	tristate "Network console logging support (EXPERIMENTAL)"

	depends on NETDEVICES && INET && EXPERIMENTAL

	depends on INET && EXPERIMENTAL

	---help---

	If you want to log kernel messages over the network, enable this.

	See <file:Documentation/networking/netconsole.txt> for details.



endif #NETDEVICES



config NETPOLL

	def_bool NETCONSOLE