Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit b955153b authored by Russell King's avatar Russell King
Browse files

ARM: sa1100/assabet: add BCR/BSR GPIO driver 



Add a GPIO driver for the board control register/board status register
for the sa1100/assabet platform.  This allows us to transition a range
of drivers to use the gpiod APIs rather than the platform private
ASSABET_BCR_* interfaces.

Signed-off-by: default avatarRussell King <rmk+kernel@armlinux.org.uk>
parent 30a7acd5

arch/arm/mach-sa1100/Kconfig

+1 −0
Original line number Diff line number Diff line
@@ -5,6 +5,7 @@ menu "SA11x0 Implementations" 
config SA1100_ASSABET

	bool "Assabet"

	select ARM_SA1110_CPUFREQ

	select GPIO_REG

	help

	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110

	  Microprocessor Development Board (also known as the Assabet).

arch/arm/mach-sa1100/assabet.c

+54 −17
Original line number Diff line number Diff line
@@ -13,6 +13,7 @@ 
#include <linux/kernel.h>

#include <linux/module.h>

#include <linux/errno.h>

#include <linux/gpio/gpio-reg.h>

#include <linux/ioport.h>

#include <linux/platform_data/sa11x0-serial.h>

#include <linux/serial_core.h>
@@ -61,20 +62,45 @@ 
unsigned long SCR_value = ASSABET_SCR_INIT;

EXPORT_SYMBOL(SCR_value);



static unsigned long BCR_value = ASSABET_BCR_DB1110;

static struct gpio_chip *assabet_bcr_gc;



static const char *assabet_names[] = {

	"cf_pwr", "cf_gfx_reset", "nsoft_reset", "irda_fsel",

	"irda_md0", "irda_md1", "stereo_loopback", "ncf_bus_on",

	"audio_pwr_on", "light_pwr_on", "lcd16data", "lcd_pwr_on",

	"rs232_on", "nred_led", "ngreen_led", "vib_on",

	"com_dtr", "com_rts", "radio_wake_mod", "i2c_enab",

	"tvir_enab", "qmute", "radio_pwr_on", "spkr_off",

	"rs232_valid", "com_dcd", "com_cts", "com_dsr",

	"radio_cts", "radio_dsr", "radio_dcd", "radio_ri",

};



/* The old deprecated interface */

void ASSABET_BCR_frob(unsigned int mask, unsigned int val)

{

	unsigned long flags;

	unsigned long m = mask, v = val;



	local_irq_save(flags);

	BCR_value = (BCR_value & ~mask) | val;

	ASSABET_BCR = BCR_value;

	local_irq_restore(flags);

	assabet_bcr_gc->set_multiple(assabet_bcr_gc, &m, &v);

}



EXPORT_SYMBOL(ASSABET_BCR_frob);



static int __init assabet_init_gpio(void __iomem *reg, u32 def_val)

{

	struct gpio_chip *gc;



	writel_relaxed(def_val, reg);



	gc = gpio_reg_init(NULL, reg, -1, 32, "assabet", 0xff000000, def_val,

			   assabet_names, NULL, NULL);



	if (IS_ERR(gc))

		return PTR_ERR(gc);



	assabet_bcr_gc = gc;



	return gc->base;

}



/*

 * The codec reset goes to three devices, so we need to release

 * the rest when any one of these requests it.  However, that
@@ -146,7 +172,7 @@ static void adv7171_write(unsigned reg, unsigned val) 
	unsigned gpdr = GPDR;

	unsigned gplr = GPLR;



	ASSABET_BCR = BCR_value | ASSABET_BCR_AUDIO_ON;

	ASSABET_BCR_frob(ASSABET_BCR_AUDIO_ON, ASSABET_BCR_AUDIO_ON);

	udelay(100);



	GPCR = SDA | SCK | MOD; /* clear L3 mode to ensure UDA1341 doesn't respond */
@@ -457,14 +483,6 @@ static void __init assabet_init(void) 
	sa11x0_ppc_configure_mcp();



	if (machine_has_neponset()) {

		/*

		 * Angel sets this, but other bootloaders may not.

		 *

		 * This must precede any driver calls to BCR_set()

		 * or BCR_clear().

		 */

		ASSABET_BCR = BCR_value = ASSABET_BCR_DB1111;



#ifndef CONFIG_ASSABET_NEPONSET

		printk( "Warning: Neponset detected but full support "

			"hasn't been configured in the kernel\n" );
@@ -748,12 +766,31 @@ static int __init assabet_leds_init(void) 
fs_initcall(assabet_leds_init);

#endif



void __init assabet_init_irq(void)

{

	u32 def_val;



	sa1100_init_irq();



	if (machine_has_neponset())

		def_val = ASSABET_BCR_DB1111;

	else

		def_val = ASSABET_BCR_DB1110;



	/*

	 * Angel sets this, but other bootloaders may not.

	 *

	 * This must precede any driver calls to BCR_set() or BCR_clear().

	 */

	assabet_init_gpio((void *)&ASSABET_BCR, def_val);

}



MACHINE_START(ASSABET, "Intel-Assabet")

	.atag_offset	= 0x100,

	.fixup		= fixup_assabet,

	.map_io		= assabet_map_io,

	.nr_irqs	= SA1100_NR_IRQS,

	.init_irq	= sa1100_init_irq,

	.init_irq	= assabet_init_irq,

	.init_time	= sa1100_timer_init,

	.init_machine	= assabet_init,

	.init_late	= sa11x0_init_late,