mach-ux500: update the DB5500 register file

#define U5500_GIC_DIST_BASE	0xA0411000

#define U5500_GIC_CPU_BASE	0xA0410100

#define U5500_DMA_BASE		0x90030000

#define U5500_STM_BASE		0x90020000

#define U5500_STM_REG_BASE	(U5500_STM_BASE + 0xF000)

#define U5500_MCDE_BASE		0xA0400000

#define U5500_MODEM_BASE	0xB0000000

#define U5500_L2CC_BASE		0xA0412000

#define U5500_NAND0_BASE	0x60000000

#define U5500_NAND1_BASE	0x70000000

#define U5500_TWD_BASE		0xa0410600

#define U5500_ICN_BASE		0xA0040000

#define U5500_B2R2_BASE		0xa0200000

#define U5500_BOOT_ROM_BASE	0x90000000

#define U5500_FSMC_BASE		(U5500_PER1_BASE + 0x0000)

#define U5500_SDI0_BASE		(U5500_PER1_BASE + 0x1000)

#define U5500_MSP1_BASE		(U5500_PER4_BASE + 0x9000)

#define U5500_GPIO2_BASE	(U5500_PER4_BASE + 0xA000)

#define U5500_CDETECT_BASE	(U5500_PER4_BASE + 0xF000)

#define U5500_PRCMU_TCDM_BASE	(U5500_PER4_BASE + 0x18000)

#define U5500_SPI0_BASE		(U5500_PER5_BASE + 0x0000)

#define U5500_SPI1_BASE		(U5500_PER5_BASE + 0x1000)

#define U5500_HASH0_BASE	(U5500_PER6_BASE + 0x1000)

#define U5500_HASH1_BASE	(U5500_PER6_BASE + 0x2000)

#define U5500_PKA_BASE		(U5500_PER6_BASE + 0x4000)

#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5000)

#define U5500_PKAM_BASE		(U5500_PER6_BASE + 0x5100)

#define U5500_MTU0_BASE		(U5500_PER6_BASE + 0x6000)

#define U5500_MTU1_BASE		(U5500_PER6_BASE + 0x7000)

#define U5500_CR_BASE		(U5500_PER6_BASE + 0x8000)

#define U5500_MBOX2_LOCAL_START	(U5500_MBOX_BASE + 0x20)

#define U5500_MBOX2_LOCAL_END	(U5500_MBOX_BASE + 0x3F)

#define U5500_ACCCON_BASE_SEC	(0xBFFF0000)

#define U5500_ACCCON_BASE		(0xBFFF1000)

#define U5500_ACCCON_CPUVEC_RESET_ADDR_OFFSET (0x00000020)

#define U5500_ACCCON_ACC_CPU_CTRL_OFFSET (0x000000BC)

#define U5500_ESRAM_BASE	        0x40000000

#define U5500_ESRAM_DMA_LCPA_OFFSET	0x10000

#define U5500_DMA_LCPA_BASE    (U5500_ESRAM_BASE + U5500_ESRAM_DMA_LCPA_OFFSET)

#define U5500_MCDE_SIZE		0x1000

#define U5500_DSI_LINK_SIZE	0x1000

#define U5500_DSI_LINK_COUNT	0x2

#define U5500_DSI_LINK1_BASE	(U5500_MCDE_BASE + U5500_MCDE_SIZE)

#define U5500_DSI_LINK2_BASE	(U5500_DSI_LINK1_BASE + U5500_DSI_LINK_SIZE)

#endif