Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ac0812d2 authored by qctecmdr Service's avatar qctecmdr Service Committed by Gerrit - the friendly Code Review server
Browse files

Merge "ARM: dts: msm: Changes to enable rear aux eeprom on trinket"

parents e5eefde0 42da643c

arch/arm64/boot/dts/qcom/trinket-camera-sensor-idp.dtsi

+57 −6
Original line number Diff line number Diff line
@@ -34,6 +34,18 @@ 
		qcom,cam-vreg-op-mode = <0>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <0>;

	};



	eeprom0: qcom,eeprom@0 {

		cell-index = <0>;

		reg = <0>;
@@ -72,7 +84,43 @@ 


	eeprom1: qcom,eeprom@1 {

		cell-index = <1>;

		reg = <0x1>;

		reg = <1>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk", "cam_vaf";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

				 &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

				 &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 35 0>,

			<&tlmm 46 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,sensor-position = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc GCC_CAMSS_MCLK1_CLK_SRC>,

			<&clock_gcc GCC_CAMSS_MCLK1_CLK>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	eeprom2: qcom,eeprom@2 {

		cell-index = <2>;

		reg = <0x2>;

		compatible = "qcom,eeprom";

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;
@@ -156,15 +204,18 @@ 
		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		qcom,eeprom-src = <&eeprom1>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;

		cam_clk-supply = <&camss_top_gdsc>;

		cam_vaf-supply = <&L5P>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana", "cam_vdig",

				"cam_clk";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0>;

				"cam_clk", "cam_vaf";

		qcom,cam-vreg-min-voltage = <1800000 2800000 1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1800000 2800000 1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <0 80000 105000 0 100000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active
@@ -195,7 +246,7 @@ 
		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,eeprom-src = <&eeprom1>;

		qcom,eeprom-src = <&eeprom2>;

		cam_vio-supply = <&L12A>;

		cam_vana-supply = <&L4P>;

		cam_vdig-supply = <&L1P>;