Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 9db3cf1c authored by Geert Uytterhoeven's avatar Geert Uytterhoeven Committed by Greg Kroah-Hartman
Browse files

misc: panel: Move all suboptions into a big if section 



All 18 suboptions related to the panel driver have individual
dependencies on PANEL.

Replace them by a single "if PANEL / endif # PANEL" section for easier
dependency management.

Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 731fcec4

drivers/misc/Kconfig

+19 −18
Original line number Diff line number Diff line
@@ -503,9 +503,10 @@ config PANEL 
	  compiled as a module, or linked into the kernel and started at boot.

	  If you don't understand what all this is about, say N.



if PANEL



config PANEL_PARPORT

	int "Default parallel port number (0=LPT1)"

	depends on PANEL

	range 0 255

	default "0"

	---help---
@@ -517,7 +518,6 @@ config PANEL_PARPORT 


config PANEL_PROFILE

	int "Default panel profile (0-5, 0=custom)"

	depends on PANEL

	range 0 5

	default "5"

	---help---
@@ -538,7 +538,7 @@ config PANEL_PROFILE 
	  for experts.



config PANEL_KEYPAD

	depends on PANEL && PANEL_PROFILE="0"

	depends on PANEL_PROFILE="0"

	int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)"

	range 0 3

	default 0
@@ -555,7 +555,7 @@ config PANEL_KEYPAD 
	  supports simultaneous keys pressed when the keypad supports them.



config PANEL_LCD

	depends on PANEL && PANEL_PROFILE="0"

	depends on PANEL_PROFILE="0"

	int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)"

	range 0 5

	default 0
@@ -578,7 +578,7 @@ config PANEL_LCD 
	   that those values changed from the 2.4 driver for better consistency.



config PANEL_LCD_HEIGHT

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "Number of lines on the LCD (1-2)"

	range 1 2

	default 2
@@ -587,7 +587,7 @@ config PANEL_LCD_HEIGHT 
	  It can either be 1 or 2.



config PANEL_LCD_WIDTH

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "Number of characters per line on the LCD (1-40)"

	range 1 40

	default 40
@@ -596,7 +596,7 @@ config PANEL_LCD_WIDTH 
	  Common values are 16,20,24,40.



config PANEL_LCD_BWIDTH

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "Internal LCD line width (1-40, 40 by default)"

	range 1 40

	default 40
@@ -612,7 +612,7 @@ config PANEL_LCD_BWIDTH 
	  If you don't know, put '40' here.



config PANEL_LCD_HWIDTH

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "Hardware LCD line width (1-64, 64 by default)"

	range 1 64

	default 64
@@ -626,7 +626,7 @@ config PANEL_LCD_HWIDTH 
	  64 here for a 2x40.



config PANEL_LCD_CHARSET

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "LCD character set (0=normal, 1=KS0074)"

	range 0 1

	default 0
@@ -642,7 +642,7 @@ config PANEL_LCD_CHARSET 
	  If you don't know, use the normal one (0).



config PANEL_LCD_PROTO

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

	int "LCD communication mode (0=parallel 8 bits, 1=serial)"

	range 0 1

	default 0
@@ -655,7 +655,7 @@ config PANEL_LCD_PROTO 
	  parallel LCD, and 1 for a serial LCD.



config PANEL_LCD_PIN_E

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

        int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) "

	range -17 17

	default 14
@@ -670,7 +670,7 @@ config PANEL_LCD_PIN_E 
	  Default for the 'E' pin in custom profile is '14' (AUTOFEED).



config PANEL_LCD_PIN_RS

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

        int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) "

	range -17 17

	default 17
@@ -685,7 +685,7 @@ config PANEL_LCD_PIN_RS 
	  Default for the 'RS' pin in custom profile is '17' (SELECT IN).



config PANEL_LCD_PIN_RW

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0"

        int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) "

	range -17 17

	default 16
@@ -700,7 +700,7 @@ config PANEL_LCD_PIN_RW 
	  Default for the 'RW' pin in custom profile is '16' (INIT).



config PANEL_LCD_PIN_SCL

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"

        int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) "

	range -17 17

	default 1
@@ -715,7 +715,7 @@ config PANEL_LCD_PIN_SCL 
	  Default for the 'SCL' pin in custom profile is '1' (STROBE).



config PANEL_LCD_PIN_SDA

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0"

        int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) "

	range -17 17

	default 2
@@ -730,7 +730,7 @@ config PANEL_LCD_PIN_SDA 
	  Default for the 'SDA' pin in custom profile is '2' (D0).



config PANEL_LCD_PIN_BL

	depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1"

	depends on PANEL_PROFILE="0" && PANEL_LCD="1"

        int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) "

	range -17 17

	default 0
@@ -745,7 +745,6 @@ config PANEL_LCD_PIN_BL 
	  Default for the 'BL' pin in custom profile is '0' (uncontrolled).



config PANEL_CHANGE_MESSAGE

	depends on PANEL

	bool "Change LCD initialization message ?"

	default "n"

	---help---
@@ -758,7 +757,7 @@ config PANEL_CHANGE_MESSAGE 
	  say 'N' and keep the default message with the version.



config PANEL_BOOT_MESSAGE

	depends on PANEL && PANEL_CHANGE_MESSAGE="y"

	depends on PANEL_CHANGE_MESSAGE="y"

	string "New initialization message"

	default ""

	---help---
@@ -770,6 +769,8 @@ config PANEL_BOOT_MESSAGE 
	  An empty message will only clear the display at driver init time. Any other

	  printf()-formatted message is valid with newline and escape codes.



endif # PANEL



source "drivers/misc/c2port/Kconfig"

source "drivers/misc/eeprom/Kconfig"

source "drivers/misc/cb710/Kconfig"