Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 964e656b authored Sep 19, 2019 by Mayank Rana

ARM: dts: msm: Move pm8150b and USB configuration



.dts is used for board specific changes whereas .dtsi is used for
soc specific changes. As there is already board having different
soc ID, move pm8150b and USB configuration from .dts to .dtsi
file. This helps to get required configuration on different
revision based boards with same soc ID.

Change-Id: Ia094cb855240f0497f3bbc1e29b6db80055f9592
Signed-off-by: Mayank Rana <mrana@codeaurora.org>

parent 7c3314cd

arch/arm64/boot/dts/qcom/sdxprairie-mtp-le-cpe.dts

+0 −32

Original line number	Original line	Diff line number	Diff line
	@@ -20,35 +20,3 @@
	"qcom,sdxprairie", "qcom,mtp";		"qcom,sdxprairie", "qcom,mtp";
	qcom,board-id = <0xB010008 0x0>;		qcom,board-id = <0xB010008 0x0>;
	};		};

	/* delete pm8150b nodes */
	&soc {
	/delete-node/ thermal-zones;
	};

	&usb {
	extcon = <&vbus_detect>;
	};

	&spmi_bus {
	/delete-node/ qpnp,fg;
	/delete-node/ bcl@1d00;
	/delete-node/ qcom,usb-pdphy@1700;
	/delete-node/ qcom,qpnp-smb5;
	/delete-node/ adc_tm@3500;
	/delete-node/ vadc@3100;
	/delete-node/ qcom,pm8150b@2;
	/delete-node/ qcom,pm8150b@3;
	};

	&qnand_1 {
	status = "ok";
	};

	&blsp1_uart2b_hs {
	status = "okay";
	};

	&vbus_detect {
	status = "okay";
	};

arch/arm64/boot/dts/qcom/sdxprairie-mtp-le-cpe.dtsi

+31 −0

Original line number	Original line	Diff line number	Diff line
	@@ -21,3 +21,34 @@
	qcom,force-warm-reboot;		qcom,force-warm-reboot;
	};		};

			/* delete pm8150b nodes */
			&soc {
			/delete-node/ thermal-zones;
			};

			&usb {
			extcon = <&vbus_detect>;
			};

			&spmi_bus {
			/delete-node/ qpnp,fg;
			/delete-node/ bcl@1d00;
			/delete-node/ qcom,usb-pdphy@1700;
			/delete-node/ qcom,qpnp-smb5;
			/delete-node/ adc_tm@3500;
			/delete-node/ vadc@3100;
			/delete-node/ qcom,pm8150b@2;
			/delete-node/ qcom,pm8150b@3;
			};

			&qnand_1 {
			status = "ok";
			};

			&blsp1_uart2b_hs {
			status = "ok";
			};

			&vbus_detect {
			status = "ok";
			};