Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8de5dff8 authored by Konrad Rzeszutek Wilk's avatar Konrad Rzeszutek Wilk Committed by Dan Williams
Browse files

libnvdimm: documentation clarifications 



A bunch of changes that I hope will help in understanding it
better for first-time readers.

Signed-off-by: default avatarKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
parent 589e75d1

Documentation/nvdimm/nvdimm.txt

+28 −21
Original line number Original line Diff line number Diff line
@@ -62,6 +62,12 @@ DAX: File system extensions to bypass the page cache and block layer to 
mmap persistent memory, from a PMEM block device, directly into a

mmap persistent memory, from a PMEM block device, directly into a

process address space.

process address space.





DSM: Device Specific Method: ACPI method to to control specific

device - in this case the firmware.



DCR: NVDIMM Control Region Structure defined in ACPI 6 Section 5.2.25.5.

It defines a vendor-id, device-id, and interface format for a given DIMM.



BTT: Block Translation Table: Persistent memory is byte addressable.

BTT: Block Translation Table: Persistent memory is byte addressable.

Existing software may have an expectation that the power-fail-atomicity

Existing software may have an expectation that the power-fail-atomicity

of writes is at least one sector, 512 bytes.  The BTT is an indirection

of writes is at least one sector, 512 bytes.  The BTT is an indirection
@@ -133,16 +139,16 @@ device driver: 
    registered, can be immediately attached to nd_pmem.

    registered, can be immediately attached to nd_pmem.





    2. BLK (nd_blk.ko): This driver performs I/O using a set of platform

    2. BLK (nd_blk.ko): This driver performs I/O using a set of platform

    defined apertures.  A set of apertures will all access just one DIMM.

    defined apertures.  A set of apertures will access just one DIMM.

    Multiple windows allow multiple concurrent accesses, much like

    Multiple windows (apertures) allow multiple concurrent accesses, much like

    tagged-command-queuing, and would likely be used by different threads or

    tagged-command-queuing, and would likely be used by different threads or

    different CPUs.

    different CPUs.





    The NFIT specification defines a standard format for a BLK-aperture, but

    The NFIT specification defines a standard format for a BLK-aperture, but

    the spec also allows for vendor specific layouts, and non-NFIT BLK

    the spec also allows for vendor specific layouts, and non-NFIT BLK

    implementations may other designs for BLK I/O.  For this reason "nd_blk"

    implementations may have other designs for BLK I/O.  For this reason

    calls back into platform-specific code to perform the I/O.  One such

    "nd_blk" calls back into platform-specific code to perform the I/O.

    implementation is defined in the "Driver Writer's Guide" and "DSM

    One such implementation is defined in the "Driver Writer's Guide" and "DSM

    Interface Example".

    Interface Example".
@@ -152,7 +158,7 @@ Why BLK? 
While PMEM provides direct byte-addressable CPU-load/store access to

While PMEM provides direct byte-addressable CPU-load/store access to

NVDIMM storage, it does not provide the best system RAS (recovery,

NVDIMM storage, it does not provide the best system RAS (recovery,

availability, and serviceability) model.  An access to a corrupted

availability, and serviceability) model.  An access to a corrupted

system-physical-address address causes a cpu exception while an access

system-physical-address address causes a CPU exception while an access

to a corrupted address through an BLK-aperture causes that block window

to a corrupted address through an BLK-aperture causes that block window

to raise an error status in a register.  The latter is more aligned with

to raise an error status in a register.  The latter is more aligned with

the standard error model that host-bus-adapter attached disks present.

the standard error model that host-bus-adapter attached disks present.
@@ -162,7 +168,7 @@ data could be interleaved in an opaque hardware specific manner across 
several DIMMs.

several DIMMs.





PMEM vs BLK

PMEM vs BLK

BLK-apertures solve this RAS problem, but their presence is also the

BLK-apertures solve these RAS problems, but their presence is also the

major contributing factor to the complexity of the ND subsystem.  They

major contributing factor to the complexity of the ND subsystem.  They

complicate the implementation because PMEM and BLK alias in DPA space.

complicate the implementation because PMEM and BLK alias in DPA space.

Any given DIMM's DPA-range may contribute to one or more

Any given DIMM's DPA-range may contribute to one or more
@@ -220,8 +226,8 @@ socket. Each unique interface (BLK or PMEM) to DPA space is identified 
by a region device with a dynamically assigned id (REGION0 - REGION5).

by a region device with a dynamically assigned id (REGION0 - REGION5).





    1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A

    1. The first portion of DIMM0 and DIMM1 are interleaved as REGION0. A

    single PMEM namespace is created in the REGION0-SPA-range that spans

    single PMEM namespace is created in the REGION0-SPA-range that spans most

    DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that

    of DIMM0 and DIMM1 with a user-specified name of "pm0.0". Some of that

    interleaved system-physical-address range is reclaimed as BLK-aperture

    interleaved system-physical-address range is reclaimed as BLK-aperture

    accessed space starting at DPA-offset (a) into each DIMM.  In that

    accessed space starting at DPA-offset (a) into each DIMM.  In that

    reclaimed space we create two BLK-aperture "namespaces" from REGION2 and

    reclaimed space we create two BLK-aperture "namespaces" from REGION2 and
@@ -230,13 +236,13 @@ by a region device with a dynamically assigned id (REGION0 - REGION5). 




    2. In the last portion of DIMM0 and DIMM1 we have an interleaved

    2. In the last portion of DIMM0 and DIMM1 we have an interleaved

    system-physical-address range, REGION1, that spans those two DIMMs as

    system-physical-address range, REGION1, that spans those two DIMMs as

    well as DIMM2 and DIMM3.  Some of REGION1 allocated to a PMEM namespace

    well as DIMM2 and DIMM3.  Some of REGION1 is allocated to a PMEM namespace

    named "pm1.0" the rest is reclaimed in 4 BLK-aperture namespaces (for

    named "pm1.0", the rest is reclaimed in 4 BLK-aperture namespaces (for

    each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and

    each DIMM in the interleave set), "blk2.1", "blk3.1", "blk4.0", and

    "blk5.0".

    "blk5.0".





    3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1

    3. The portion of DIMM2 and DIMM3 that do not participate in the REGION1

    interleaved system-physical-address range (i.e. the DPA address below

    interleaved system-physical-address range (i.e. the DPA address past

    offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.

    offset (b) are also included in the "blk4.0" and "blk5.0" namespaces.

    Note, that this example shows that BLK-aperture namespaces don't need to

    Note, that this example shows that BLK-aperture namespaces don't need to

    be contiguous in DPA-space.

    be contiguous in DPA-space.
@@ -252,15 +258,15 @@ LIBNVDIMM Kernel Device Model and LIBNDCTL Userspace API 




What follows is a description of the LIBNVDIMM sysfs layout and a

What follows is a description of the LIBNVDIMM sysfs layout and a

corresponding object hierarchy diagram as viewed through the LIBNDCTL

corresponding object hierarchy diagram as viewed through the LIBNDCTL

api.  The example sysfs paths and diagrams are relative to the Example

API.  The example sysfs paths and diagrams are relative to the Example

NVDIMM Platform which is also the LIBNVDIMM bus used in the LIBNDCTL unit

NVDIMM Platform which is also the LIBNVDIMM bus used in the LIBNDCTL unit

test.

test.





LIBNDCTL: Context

LIBNDCTL: Context

Every api call in the LIBNDCTL library requires a context that holds the

Every API call in the LIBNDCTL library requires a context that holds the

logging parameters and other library instance state.  The library is

logging parameters and other library instance state.  The library is

based on the libabc template:

based on the libabc template:

https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git/

https://git.kernel.org/cgit/linux/kernel/git/kay/libabc.git





LIBNDCTL: instantiate a new library context example

LIBNDCTL: instantiate a new library context example
@@ -509,7 +515,7 @@ At first glance it seems since NFIT defines just PMEM and BLK interface 
types that we should simply name REGION devices with something derived

types that we should simply name REGION devices with something derived

from those type names.  However, the ND subsystem explicitly keeps the

from those type names.  However, the ND subsystem explicitly keeps the

REGION name generic and expects userspace to always consider the

REGION name generic and expects userspace to always consider the

region-attributes for 4 reasons:

region-attributes for four reasons:





    1. There are already more than two REGION and "namespace" types.  For

    1. There are already more than two REGION and "namespace" types.  For

    PMEM there are two subtypes.  As mentioned previously we have PMEM where

    PMEM there are two subtypes.  As mentioned previously we have PMEM where
@@ -698,8 +704,8 @@ static int configure_namespace(struct ndctl_region *region, 




Why the Term "namespace"?

Why the Term "namespace"?





    1. Why not "volume" for instance?  "volume" ran the risk of confusing ND

    1. Why not "volume" for instance?  "volume" ran the risk of confusing

    as a volume manager like device-mapper.

    ND (libnvdimm subsystem) to a volume manager like device-mapper.





    2. The term originated to describe the sub-devices that can be created

    2. The term originated to describe the sub-devices that can be created

    within a NVME controller (see the nvme specification:

    within a NVME controller (see the nvme specification:
@@ -774,13 +780,14 @@ block" needs to be destroyed. Note, that to destroy a BTT the media 
needs to be written in raw mode.  By default, the kernel will autodetect

needs to be written in raw mode.  By default, the kernel will autodetect

the presence of a BTT and disable raw mode.  This autodetect behavior

the presence of a BTT and disable raw mode.  This autodetect behavior

can be suppressed by enabling raw mode for the namespace via the

can be suppressed by enabling raw mode for the namespace via the

ndctl_namespace_set_raw_mode() api.

ndctl_namespace_set_raw_mode() API.









Summary LIBNDCTL Diagram

Summary LIBNDCTL Diagram

------------------------

------------------------





For the given example above, here is the view of the objects as seen by the LIBNDCTL api:

For the given example above, here is the view of the objects as seen by the

LIBNDCTL API:

            +---+

            +---+

            |CTX|    +---------+   +--------------+  +---------------+

            |CTX|    +---------+   +--------------+  +---------------+

            +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |

            +-+-+  +-> REGION0 +---> NAMESPACE0.0 +--> PMEM8 "pm0.0" |