Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 70e357f8 authored by Philipp Zabel's avatar Philipp Zabel Committed by Russell King
Browse files

[ARM] 4948/1: magician: use htc-egpio to drive the GPIO/IRQ expander CPLD 



needed for power management (audio, BT, charging, GSM, LCD, SD), GSM, flash and SD operation and audio routing.

Signed-off-by: default avatarPhilipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent a1635b8f

arch/arm/configs/magician_defconfig

+1 −0
Original line number Diff line number Diff line
@@ -712,6 +712,7 @@ CONFIG_SSB_POSSIBLE=y 
# Multifunction device drivers

#

# CONFIG_MFD_SM501 is not set

CONFIG_HTC_EGPIO=y



#

# Multimedia devices

arch/arm/mach-pxa/magician.c

+59 −1
Original line number Diff line number Diff line
@@ -18,6 +18,7 @@ 
#include <linux/platform_device.h>

#include <linux/gpio_keys.h>

#include <linux/input.h>

#include <linux/mfd/htc-egpio.h>

#include <linux/mtd/mtd.h>

#include <linux/mtd/map.h>

#include <linux/mtd/physmap.h>
@@ -84,6 +85,62 @@ static struct platform_device gpio_keys = { 
	.id   = -1,

};





/*

 * EGPIO (Xilinx CPLD)

 *

 * 7 32-bit aligned 8-bit registers: 3x output, 1x irq, 3x input

 */



static struct resource egpio_resources[] = {

	[0] = {

		.start = PXA_CS3_PHYS,

		.end   = PXA_CS3_PHYS + 0x20,

		.flags = IORESOURCE_MEM,

	},

	[1] = {

		.start = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),

		.end   = gpio_to_irq(GPIO13_MAGICIAN_CPLD_IRQ),

		.flags = IORESOURCE_IRQ,

	},

};



static struct htc_egpio_chip egpio_chips[] = {

	[0] = {

		.reg_start = 0,

		.gpio_base = MAGICIAN_EGPIO(0, 0),

		.num_gpios = 24,

		.direction = HTC_EGPIO_OUTPUT,

		.initial_values = 0x40, /* EGPIO_MAGICIAN_GSM_RESET */

	},

	[1] = {

		.reg_start = 4,

		.gpio_base = MAGICIAN_EGPIO(4, 0),

		.num_gpios = 24,

		.direction = HTC_EGPIO_INPUT,

	},

};



static struct htc_egpio_platform_data egpio_info = {

	.reg_width    = 8,

	.bus_width    = 32,

	.irq_base     = IRQ_BOARD_START,

	.num_irqs     = 4,

	.ack_register = 3,

	.chip         = egpio_chips,

	.num_chips    = ARRAY_SIZE(egpio_chips),

};



static struct platform_device egpio = {

	.name          = "htc-egpio",

	.id            = -1,

	.resource      = egpio_resources,

	.num_resources = ARRAY_SIZE(egpio_resources),

	.dev = {

		.platform_data = &egpio_info,

	},

};



/*

 * LCD - Toppoly TD028STEB1

 */
@@ -182,8 +239,8 @@ static struct physmap_flash_data strataflash_data = { 
static struct platform_device strataflash = {

	.name          = "physmap-flash",

	.id            = -1,

	.num_resources = 1,

	.resource      = &strataflash_resource,

	.num_resources = 1,

	.dev = {

		.platform_data = &strataflash_data,

	},
@@ -195,6 +252,7 @@ static struct platform_device strataflash = { 


static struct platform_device *devices[] __initdata = {

	&gpio_keys,

	&egpio,

	&backlight,

	&strataflash,

};

include/asm-arm/arch-pxa/irqs.h

+2 −1
Original line number Diff line number Diff line
@@ -181,7 +181,8 @@ 
#elif defined(CONFIG_ARCH_LUBBOCK) || \

      defined(CONFIG_MACH_LOGICPD_PXA270) || \

      defined(CONFIG_MACH_MAINSTONE) || \

      defined(CONFIG_MACH_PCM027)

      defined(CONFIG_MACH_PCM027) || \

      defined(CONFIG_MACH_MAGICIAN)

#define NR_IRQS			(IRQ_BOARD_END)

#else

#define NR_IRQS			(IRQ_BOARD_START)

include/asm-arm/arch-pxa/magician.h

+53 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 
#ifndef _MAGICIAN_H_

#define _MAGICIAN_H_



#include <asm/arch/irqs.h>

#include <asm/arch/pxa2xx-gpio.h>



/*
@@ -108,4 +109,56 @@ 
#define GPIO119_MAGICIAN_UNKNOWN_MD		(119 | GPIO_OUT)

#define GPIO120_MAGICIAN_UNKNOWN_MD		(120 | GPIO_OUT)



/*

 * CPLD IRQs

 */



#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)

#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)

#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)

#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)



/*

 * CPLD EGPIOs

 */



#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */

#define MAGICIAN_EGPIO(reg,bit) \

	(MAGICIAN_EGPIO_BASE + 8*reg + bit)



/* output */



#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)

#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)

#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)

#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)

#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)

#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)

#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)

#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)

#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)

#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)

#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)

#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)

#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)

#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)

#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)

#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)

#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)

#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)

#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)



/* input */



#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)

#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)



#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)

#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)

#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)

#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)

#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)



#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)



#endif /* _MAGICIAN_H_ */