Merge "ARM: dts: msm: add support for ESD and DFPS features" (6ff054c4) · Commits · e / devices / android_kernel_xiaomi_nabu

arch/arm64/boot/dts/qcom/atoll-idp.dtsi

+9 −0

Original line number	Diff line number	Diff line
		@@ -245,6 +245,15 @@
		qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
		};

		&dsi_rm69299_visionox_amoled_cmd {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply_labibb_amoled>;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-bl-min-level = <1>;
		qcom,mdss-dsi-bl-max-level = <255>;
		qcom,platform-te-gpio = <&tlmm 10 0>;
		qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;
		};

		&qupv3_se0_i2c {
		status = "ok";
		qcom,clk-freq-out = <1000000>;

arch/arm64/boot/dts/qcom/atoll-sde-display.dtsi

+43 −1

Original line number	Diff line number	Diff line
		@@ -11,6 +11,7 @@
		*/

		#include "dsi-panel-rm69299-visionox-amoled-fhd-plus-video.dtsi"
		#include "dsi-panel-rm69299-visionox-amoled-fhd-plus-cmd.dtsi"
		#include <dt-bindings/clock/mdss-10nm-pll-clk.h>

		&soc {
		@@ -95,6 +96,15 @@
		qcom,dsi-panel = <&dsi_rm69299_visionox_amoled_video>;
		};

		dsi_rm69299_visionox_amoled_cmd_display: qcom,dsi-display@1 {
		label = "dsi_rm69299_visionox_amoled_cmd_display";
		qcom,display-type = "primary";
		qcom,dsi-ctrl-num = <0>;
		qcom,dsi-phy-num = <0>;
		qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0";
		qcom,dsi-panel = <&dsi_rm69299_visionox_amoled_cmd>;
		};

		sde_dsi: qcom,dsi-display {
		compatible = "qcom,dsi-display";

		@@ -125,7 +135,8 @@
		ibb-supply = <&lcdb_ncp_vreg>;

		qcom,dsi-display-list =
		<&dsi_rm69299_visionox_amoled_vid_display>;
		<&dsi_rm69299_visionox_amoled_vid_display
		&dsi_rm69299_visionox_amoled_cmd_display>;
		};

		sde_wb: qcom,wb-display@0 {
		@@ -160,6 +171,36 @@
		};

		&dsi_rm69299_visionox_amoled_video {
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
		qcom,mdss-dsi-panel-status-value = <0x9c>;
		qcom,mdss-dsi-panel-on-check-value = <0x9c>;
		qcom,mdss-dsi-panel-status-read-length = <1>;
		qcom,dsi-supported-dfps-list = <60 55 48>;
		qcom,mdss-dsi-pan-enable-dynamic-fps;
		qcom,mdss-dsi-pan-fps-update = "dfps_immediate_porch_mode_vfp";

		qcom,mdss-dsi-t-clk-post = <0x0E>;
		qcom,mdss-dsi-t-clk-pre = <0x31>;
		qcom,mdss-dsi-display-timings {
		timing@0{
		qcom,mdss-dsi-panel-phy-timings = [00 20 08 08 24 23 08
		08 05 02 04 00];
		qcom,display-topology = <1 0 1>;
		};
		};
		};

		&dsi_rm69299_visionox_amoled_cmd {
		qcom,esd-check-enabled;
		qcom,mdss-dsi-panel-status-check-mode = "reg_read";
		qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];
		qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";
		qcom,mdss-dsi-panel-status-value = <0x9c>;
		qcom,mdss-dsi-panel-on-check-value = <0x9c>;
		qcom,mdss-dsi-panel-status-read-length = <1>;
		qcom,mdss-dsi-t-clk-post = <0x0E>;
		qcom,mdss-dsi-t-clk-pre = <0x31>;
		qcom,mdss-dsi-display-timings {
		@@ -167,6 +208,7 @@
		qcom,mdss-dsi-panel-phy-timings = [00 20 08 08 24 23 08
		08 05 02 04 00];
		qcom,display-topology = <1 0 1>;
		qcom,default-topology-index = <0>;
		};
		};
		};

arch/arm64/boot/dts/qcom/dsi-panel-rm69299-visionox-amoled-fhd-plus-cmd.dtsi

0 → 100644

+73 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2019, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_rm69299_visionox_amoled_cmd:
		qcom,mdss_dsi_rm69299_visionox_amoled_cmd {
		qcom,mdss-dsi-panel-name =
		"rm69299 amoled fhd+ cmd mode dsi visionox panel";
		qcom,mdss-dsi-panel-type = "dsi_cmd_mode";
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-tx-eot-append;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-lane-2-state;
		qcom,mdss-dsi-lane-3-state;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-lp11-init;
		qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";
		qcom,mdss-dsi-reset-sequence = <1 10>, <0 10>, <1 10>;
		qcom,mdss-dsi-te-pin-select = <1>;
		qcom,mdss-dsi-wr-mem-start = <0x2c>;
		qcom,mdss-dsi-wr-mem-continue = <0x3c>;
		qcom,mdss-dsi-te-dcs-command = <1>;
		qcom,mdss-dsi-te-check-enable;
		qcom,mdss-dsi-te-using-te-pin;
		qcom,mdss-dsi-display-timings {
		timing@0 {
		qcom,mdss-dsi-panel-width = <1080>;
		qcom,mdss-dsi-panel-height = <2248>;
		qcom,mdss-dsi-h-front-porch = <26>;
		qcom,mdss-dsi-h-back-porch = <36>;
		qcom,mdss-dsi-h-pulse-width = <2>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <4>;
		qcom,mdss-dsi-v-front-porch = <56>;
		qcom,mdss-dsi-v-pulse-width = <4>;
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-on-command = [
		39 01 00 00 00 00 02 FE 00
		39 01 00 00 00 00 02 C2 08
		39 01 00 00 00 00 02 35 00
		39 01 00 00 00 00 02 51 FF
		05 01 00 00 96 00 02 11 00
		05 01 00 00 32 00 02 29 00];
		qcom,mdss-dsi-off-command = [
		05 01 00 00 32 00 02 28 00
		05 01 00 00 96 00 02 10 00];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_hs_mode";
		};
		};
		};
		};