Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6ed3c43d authored by Manjunath Goudar's avatar Manjunath Goudar Committed by Greg Kroah-Hartman
Browse files

USB: EHCI: make ehci-orion a separate driver



With the multiplatform changes in arm-soc tree, it becomes
possible to enable the mvebu platform (which uses
ehci-orion) at the same time as other platforms that require
a conflicting EHCI bus glue. At the moment, this results
in a warning like

drivers/usb/host/ehci-hcd.c:1297:0: warning: "PLATFORM_DRIVER" redefined [enabled by default]
drivers/usb/host/ehci-hcd.c:1277:0: note: this is the location of the previous definition
drivers/usb/host/ehci-orion.c:334:31: warning: 'ehci_orion_driver' defined but not used [-Wunused-variable]

and an ehci driver that only works on one of them.

With the infrastructure added by Alan Stern in patch 3e023203
"USB: EHCI: prepare to make ehci-hcd a library module", we can
avoid this problem by turning a bus glue into a separate
module, as we do here for the orion bus glue.

Signed-off-by: default avatarManjunath Goudar <manjunath.goudar@linaro.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent d57ada0c
Loading
Loading
Loading
Loading
+8 −0
Original line number Original line Diff line number Diff line
@@ -162,6 +162,14 @@ config USB_EHCI_HCD_OMAP
	  Enables support for the on-chip EHCI controller on
	  Enables support for the on-chip EHCI controller on
	  OMAP3 and later chips.
	  OMAP3 and later chips.


config USB_EHCI_HCD_ORION
        tristate  "Support for Marvell Orion on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && PLAT_ORION
        default y
        ---help---
          Enables support for the on-chip EHCI controller on
          Morvell Orion chips.

config USB_EHCI_HCD_VT8500
config USB_EHCI_HCD_VT8500
        tristate "Support for VT8500 on-chip EHCI USB controller"
        tristate "Support for VT8500 on-chip EHCI USB controller"
        depends on USB_EHCI_HCD && ARCH_VT8500
        depends on USB_EHCI_HCD && ARCH_VT8500
+1 −0
Original line number Original line Diff line number Diff line
@@ -30,6 +30,7 @@ obj-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o


obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
obj-$(CONFIG_USB_EHCI_HCD_VT8500)+= ehci-vt8500.o
obj-$(CONFIG_USB_EHCI_HCD_VT8500)+= ehci-vt8500.o
obj-$(CONFIG_USB_EHCI_HCD_ORION)+= ehci-orion.o
obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
obj-$(CONFIG_USB_ISP1362_HCD)	+= isp1362-hcd.o
obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
obj-$(CONFIG_USB_OHCI_HCD)	+= ohci-hcd.o
+1 −5
Original line number Original line Diff line number Diff line
@@ -1272,11 +1272,6 @@ MODULE_LICENSE ("GPL");
#define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
#define XILINX_OF_PLATFORM_DRIVER	ehci_hcd_xilinx_of_driver
#endif
#endif


#ifdef CONFIG_PLAT_ORION
#include "ehci-orion.c"
#define	PLATFORM_DRIVER		ehci_orion_driver
#endif

#ifdef CONFIG_USB_W90X900_EHCI
#ifdef CONFIG_USB_W90X900_EHCI
#include "ehci-w90x900.c"
#include "ehci-w90x900.c"
#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
#define	PLATFORM_DRIVER		ehci_hcd_w90x900_driver
@@ -1343,6 +1338,7 @@ MODULE_LICENSE ("GPL");
	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
	!IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
	!defined(PLATFORM_DRIVER) && \
	!defined(PLATFORM_DRIVER) && \
	!IS_ENABLED(CONFIG_ARCH_VT8500) && \
	!IS_ENABLED(CONFIG_ARCH_VT8500) && \
	!IS_ENABLED(CONFIG_PLAT_ORION) && \
	!defined(PS3_SYSTEM_BUS_DRIVER) && \
	!defined(PS3_SYSTEM_BUS_DRIVER) && \
	!defined(OF_PLATFORM_DRIVER) && \
	!defined(OF_PLATFORM_DRIVER) && \
	!defined(XILINX_OF_PLATFORM_DRIVER)
	!defined(XILINX_OF_PLATFORM_DRIVER)
+42 −48
Original line number Original line Diff line number Diff line
@@ -17,6 +17,13 @@
#include <linux/of.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
#include <linux/of_irq.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>

#include "ehci.h"



#define rdl(off)	__raw_readl(hcd->regs + (off))
#define rdl(off)	__raw_readl(hcd->regs + (off))
#define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
#define wrl(off, val)	__raw_writel((val), hcd->regs + (off))
@@ -34,6 +41,17 @@
#define USB_PHY_IVREF_CTRL	0x440
#define USB_PHY_IVREF_CTRL	0x440
#define USB_PHY_TST_GRP_CTRL	0x450
#define USB_PHY_TST_GRP_CTRL	0x450


#define DRIVER_DESC "EHCI orion driver"

static const char hcd_name[] = "ehci-orion";

static struct hc_driver __read_mostly ehci_orion_hc_driver;

static const struct ehci_driver_overrides orion_overrides __initdata = {
	.reset = ehci_setup,
};


/*
/*
 * Implement Orion USB controller specification guidelines
 * Implement Orion USB controller specification guidelines
 */
 */
@@ -104,51 +122,6 @@ static void orion_usb_phy_v1_setup(struct usb_hcd *hcd)
	wrl(USB_MODE, 0x13);
	wrl(USB_MODE, 0x13);
}
}


static const struct hc_driver ehci_orion_hc_driver = {
	.description = hcd_name,
	.product_desc = "Marvell Orion EHCI",
	.hcd_priv_size = sizeof(struct ehci_hcd),

	/*
	 * generic hardware linkage
	 */
	.irq = ehci_irq,
	.flags = HCD_MEMORY | HCD_USB2,

	/*
	 * basic lifecycle operations
	 */
	.reset = ehci_setup,
	.start = ehci_run,
	.stop = ehci_stop,
	.shutdown = ehci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue = ehci_urb_enqueue,
	.urb_dequeue = ehci_urb_dequeue,
	.endpoint_disable = ehci_endpoint_disable,
	.endpoint_reset = ehci_endpoint_reset,

	/*
	 * scheduling support
	 */
	.get_frame_number = ehci_get_frame,

	/*
	 * root hub support
	 */
	.hub_status_data = ehci_hub_status_data,
	.hub_control = ehci_hub_control,
	.bus_suspend = ehci_bus_suspend,
	.bus_resume = ehci_bus_resume,
	.relinquish_port = ehci_relinquish_port,
	.port_handed_over = ehci_port_handed_over,

	.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
};

static void
static void
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
			     const struct mbus_dram_target_info *dram)
			     const struct mbus_dram_target_info *dram)
@@ -323,8 +296,6 @@ static int __exit ehci_orion_drv_remove(struct platform_device *pdev)
	return 0;
	return 0;
}
}


MODULE_ALIAS("platform:orion-ehci");

static const struct of_device_id ehci_orion_dt_ids[] = {
static const struct of_device_id ehci_orion_dt_ids[] = {
	{ .compatible = "marvell,orion-ehci", },
	{ .compatible = "marvell,orion-ehci", },
	{},
	{},
@@ -336,8 +307,31 @@ static struct platform_driver ehci_orion_driver = {
	.remove		= __exit_p(ehci_orion_drv_remove),
	.remove		= __exit_p(ehci_orion_drv_remove),
	.shutdown	= usb_hcd_platform_shutdown,
	.shutdown	= usb_hcd_platform_shutdown,
	.driver = {
	.driver = {
		.name	= "orion-ehci",
		.name	= hcd_name,
		.owner  = THIS_MODULE,
		.owner  = THIS_MODULE,
		.of_match_table = of_match_ptr(ehci_orion_dt_ids),
		.of_match_table = of_match_ptr(ehci_orion_dt_ids),
	},
	},
};
};

static int __init ehci_orion_init(void)
{
	if (usb_disabled())
		return -ENODEV;

	pr_info("%s: " DRIVER_DESC "\n", hcd_name);

	ehci_init_driver(&ehci_orion_hc_driver, &orion_overrides);
	return platform_driver_register(&ehci_orion_driver);
}
module_init(ehci_orion_init);

static void __exit ehci_orion_cleanup(void)
{
	platform_driver_unregister(&ehci_orion_driver);
}
module_exit(ehci_orion_cleanup);

MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_ALIAS("platform:ehci-orion");
MODULE_AUTHOR("Tzachi Perelstein");
MODULE_LICENSE("GPL");