Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 6bfb09a1 authored by Linus Torvalds's avatar Linus Torvalds
Browse files

Merge master.kernel.org:/home/rmk/linux-2.6-arm 

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix PCI_DMA_BUS_IS_PHYS for ARM
  [ARM] 5247/1: tosa: SW_EAR_IN support
  [ARM] 5246/1: tosa: add proper clock alias for tc6393xb clock
  [ARM] 5245/1: Fix warning about unused return value in drivers/pcmcia
  [ARM] OMAP: Fix MMC device data
  imx serial: fix rts handling for non imx1 based hardware
  imx serial: set RXD mux bit on i.MX27 and i.MX31
  i.MX serial: fix init failure
  pcm037: add rts/cts support for serial port
parents 7c22a3d8 88c381bf

arch/arm/include/asm/pci.h

+1 −1
Original line number Diff line number Diff line
@@ -30,7 +30,7 @@ static inline void pcibios_penalize_isa_irq(int irq, int active) 
 * The networking and block device layers use this boolean for bounce

 * buffer decisions.

 */

#define PCI_DMA_BUS_IS_PHYS     (0)

#define PCI_DMA_BUS_IS_PHYS     (1)



/*

 * Whether pci_unmap_{single,page} is a nop depends upon the

arch/arm/mach-mx3/pcm037.c

+1 −1
Original line number Diff line number Diff line
@@ -54,7 +54,7 @@ static struct platform_device pcm037_flash = { 
};



static struct imxuart_platform_data uart_pdata = {

	.flags = 0,

	.flags = IMXUART_HAVE_RTSCTS,

};



static struct platform_device *devices[] __initdata = {

arch/arm/mach-pxa/tosa.c

+11 −0
Original line number Diff line number Diff line
@@ -50,6 +50,7 @@ 
#include <asm/mach/sharpsl_param.h>



#include "generic.h"

#include "clock.h"

#include "devices.h"



static unsigned long tosa_pin_config[] = {
@@ -521,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = { 
		.wakeup	= 1,

		.active_low = 1,

	},

	{

		.type	= EV_SW,

		.code	= SW_HEADPHONE_INSERT,

		.gpio	= TOSA_GPIO_EAR_IN,

		.desc	= "HeadPhone insert",

		.active_low = 1,

		.debounce_interval = 300,

	},

};



static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -792,6 +801,8 @@ static void __init tosa_init(void) 
	pxa_set_i2c_info(NULL);

	platform_scoop_config = &tosa_pcmcia_config;



	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);



	platform_add_devices(devices, ARRAY_SIZE(devices));

}

arch/arm/plat-omap/devices.c

+91 −32
Original line number Diff line number Diff line
@@ -21,6 +21,7 @@ 


#include <mach/tc.h>

#include <mach/board.h>

#include <mach/mmc.h>

#include <mach/mux.h>

#include <mach/gpio.h>

#include <mach/menelaus.h>
@@ -194,25 +195,38 @@ void omap_mcbsp_register_board_cfg(struct omap_mcbsp_platform_data *config, 


/*-------------------------------------------------------------------------*/



#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

#if	defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \

	defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)



#ifdef CONFIG_ARCH_OMAP24XX

#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)

#define	OMAP_MMC1_BASE		0x4809c000

#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x1fc)

#define	OMAP_MMC1_INT		INT_24XX_MMC_IRQ



#define	OMAP_MMC2_BASE		0x480b4000

#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x1fc)

#define	OMAP_MMC2_INT		INT_24XX_MMC2_IRQ



#else



#define	OMAP_MMC1_BASE		0xfffb7800

#define	OMAP_MMC1_END		(OMAP_MMC1_BASE + 0x7f)

#define OMAP_MMC1_INT		INT_MMC

#endif



#define	OMAP_MMC2_BASE		0xfffb7c00	/* omap16xx only */

#define	OMAP_MMC2_END		(OMAP_MMC2_BASE + 0x7f)

#define	OMAP_MMC2_INT		INT_1610_MMC2



static struct omap_mmc_conf mmc1_conf;

#endif



static struct omap_mmc_platform_data mmc1_data;



static u64 mmc1_dmamask = 0xffffffff;



static struct resource mmc1_resources[] = {

	{

		.start		= OMAP_MMC1_BASE,

		.end		= OMAP_MMC1_BASE + 0x7f,

		.end		= OMAP_MMC1_END,

		.flags		= IORESOURCE_MEM,

	},

	{
@@ -226,26 +240,27 @@ static struct platform_device mmc_omap_device1 = { 
	.id		= 1,

	.dev = {

		.dma_mask	= &mmc1_dmamask,

		.platform_data	= &mmc1_conf,

		.platform_data	= &mmc1_data,

	},

	.num_resources	= ARRAY_SIZE(mmc1_resources),

	.resource	= mmc1_resources,

};



#ifdef	CONFIG_ARCH_OMAP16XX

#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \

	defined(CONFIG_ARCH_OMAP34XX)



static struct omap_mmc_conf mmc2_conf;

static struct omap_mmc_platform_data mmc2_data;



static u64 mmc2_dmamask = 0xffffffff;



static struct resource mmc2_resources[] = {

	{

		.start		= OMAP_MMC2_BASE,

		.end		= OMAP_MMC2_BASE + 0x7f,

		.end		= OMAP_MMC2_END,

		.flags		= IORESOURCE_MEM,

	},

	{

		.start		= INT_1610_MMC2,

		.start		= OMAP_MMC2_INT,

		.flags		= IORESOURCE_IRQ,

	},

};
@@ -255,26 +270,19 @@ static struct platform_device mmc_omap_device2 = { 
	.id		= 2,

	.dev = {

		.dma_mask	= &mmc2_dmamask,

		.platform_data	= &mmc2_conf,

		.platform_data	= &mmc2_data,

	},

	.num_resources	= ARRAY_SIZE(mmc2_resources),

	.resource	= mmc2_resources,

};

#endif



static void __init omap_init_mmc(void)

static inline void omap_init_mmc_conf(const struct omap_mmc_config *mmc_conf)

{

	const struct omap_mmc_config	*mmc_conf;

	const struct omap_mmc_conf	*mmc;



	/* NOTE:  assumes MMC was never (wrongly) enabled */

	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);

	if (!mmc_conf)

	if (cpu_is_omap2430() || cpu_is_omap34xx())

		return;



	/* block 1 is always available and has just one pinout option */

	mmc = &mmc_conf->mmc[0];

	if (mmc->enabled) {

	if (mmc_conf->mmc[0].enabled) {

		if (cpu_is_omap24xx()) {

			omap_cfg_reg(H18_24XX_MMC_CMD);

			omap_cfg_reg(H15_24XX_MMC_CLKI);
@@ -292,7 +300,7 @@ static void __init omap_init_mmc(void) 
				omap_cfg_reg(P20_1710_MMC_DATDIR0);

			}

		}

		if (mmc->wire4) {

		if (mmc_conf->mmc[0].wire4) {

			if (cpu_is_omap24xx()) {

				omap_cfg_reg(H14_24XX_MMC_DAT1);

				omap_cfg_reg(E19_24XX_MMC_DAT2);
@@ -303,25 +311,35 @@ static void __init omap_init_mmc(void) 
			} else {

				omap_cfg_reg(MMC_DAT1);

				/* NOTE:  DAT2 can be on W10 (here) or M15 */

				if (!mmc->nomux)

				if (!mmc_conf->mmc[0].nomux)

					omap_cfg_reg(MMC_DAT2);

				omap_cfg_reg(MMC_DAT3);

			}

		}

		mmc1_conf = *mmc;

		(void) platform_device_register(&mmc_omap_device1);

#if defined(CONFIG_ARCH_OMAP2420)

		if (mmc_conf->mmc[0].internal_clock) {

			/*

			 * Use internal loop-back in MMC/SDIO

			 * Module Input Clock selection

			 */

			if (cpu_is_omap24xx()) {

				u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);

				v |= (1 << 24); /* not used in 243x */

				omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);

			}

		}

#endif

	}



#ifdef	CONFIG_ARCH_OMAP16XX

	/* block 2 is on newer chips, and has many pinout options */

	mmc = &mmc_conf->mmc[1];

	if (mmc->enabled) {

		if (!mmc->nomux) {

	if (mmc_conf->mmc[1].enabled) {

		if (!mmc_conf->mmc[1].nomux) {

			omap_cfg_reg(Y8_1610_MMC2_CMD);

			omap_cfg_reg(Y10_1610_MMC2_CLK);

			omap_cfg_reg(R18_1610_MMC2_CLKIN);

			omap_cfg_reg(W8_1610_MMC2_DAT0);

			if (mmc->wire4) {

			if (mmc_conf->mmc[1].wire4) {

				omap_cfg_reg(V8_1610_MMC2_DAT1);

				omap_cfg_reg(W15_1610_MMC2_DAT2);

				omap_cfg_reg(R10_1610_MMC2_DAT3);
@@ -337,14 +355,55 @@ static void __init omap_init_mmc(void) 
		if (cpu_is_omap1710())

			omap_writel(omap_readl(MOD_CONF_CTRL_1) | (1 << 24),

				     MOD_CONF_CTRL_1);

		mmc2_conf = *mmc;

		(void) platform_device_register(&mmc_omap_device2);

	}

#endif

}



static void __init omap_init_mmc(void)

{

	const struct omap_mmc_config	*mmc_conf;



	/* NOTE:  assumes MMC was never (wrongly) enabled */

	mmc_conf = omap_get_config(OMAP_TAG_MMC, struct omap_mmc_config);

	if (!mmc_conf)

		return;



	omap_init_mmc_conf(mmc_conf);



	if (mmc_conf->mmc[0].enabled) {

		mmc1_data.conf = mmc_conf->mmc[0];

		(void) platform_device_register(&mmc_omap_device1);

	}



#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \

	defined(CONFIG_ARCH_OMAP34XX)

	if (mmc_conf->mmc[1].enabled) {

		mmc2_data.conf = mmc_conf->mmc[1];

		(void) platform_device_register(&mmc_omap_device2);

	}

#endif

}



void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info)

{

	switch (host) {

	case 1:

		mmc1_data = *info;

		break;

#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP2430) || \

	defined(CONFIG_ARCH_OMAP34XX)

	case 2:

		mmc2_data = *info;

		break;

#endif

	default:

		BUG();

	}

}



#else

static inline void omap_init_mmc(void) {}

void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info) {}

#endif



/*-------------------------------------------------------------------------*/

drivers/pcmcia/soc_common.c

+5 −1
Original line number Diff line number Diff line
@@ -748,7 +748,9 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops 


		add_timer(&skt->poll_timer);



		device_create_file(&skt->socket.dev, &dev_attr_status);

		ret = device_create_file(&skt->socket.dev, &dev_attr_status);

		if (ret)

			goto out_err_8;

	}



	dev_set_drvdata(dev, sinfo);
@@ -758,6 +760,8 @@ int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops 
	do {

		skt = &sinfo->skt[i];



		device_remove_file(&skt->socket.dev, &dev_attr_status);

 out_err_8:

		del_timer_sync(&skt->poll_timer);

		pcmcia_unregister_socket(&skt->socket);