Loading drivers/soc/qcom/Kconfig +9 −0 Original line number Diff line number Diff line Loading @@ -133,6 +133,15 @@ config QCOM_LITO_LLCC data required to configure LLCC so that clients can start using the LLCC slices. config QCOM_LAGOON_LLCC tristate "Qualcomm Technologies, Inc. LAGOON LLCC driver" depends on QCOM_LLCC help Qualcomm Technologies, Inc. platform specific LLCC driver for LAGOON. Say yes here to enable the LLCC driver for LAGOON. This provides data required to configure LLCC so that clients can start using the LLCC slices. config QCOM_SDM845_LLCC tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" depends on QCOM_LLCC Loading drivers/soc/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -24,6 +24,7 @@ obj-$(CONFIG_QCOM_IPCC) += qcom_ipcc.o obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o obj-$(CONFIG_QCOM_KONA_LLCC) += llcc-kona.o obj-$(CONFIG_QCOM_LITO_LLCC) += llcc-lito.o obj-$(CONFIG_QCOM_LAGOON_LLCC) += llcc-lagoon.o obj-$(CONFIG_QCOM_LLCC_PERFMON) += llcc_perfmon.o obj-$(CONFIG_QCOM_APR) += apr.o obj-$(CONFIG_QCOM_SECURE_BUFFER) += secure_buffer.o Loading drivers/soc/qcom/llcc-lagoon.c 0 → 100644 +83 −0 Original line number Diff line number Diff line // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2020, The Linux Foundation. All rights reserved. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/soc/qcom/llcc-qcom.h> /* * SCT entry contains of the following parameters * uid: Unique id for the client's use case * slice_id: llcc slice id for each client * max_cap: The maximum capacity of the cache slice provided in KB * priority: Priority of the client used to select victim line for replacement * fixed_size: Determine of the slice has a fixed capacity * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if * it't not a reserved way. * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used * by any other client than the one its assigned to. * cache_mode: Each slice operates as a cache, this controls the mode of the * slice normal or TCM * probe_target_ways: Determines what ways to probe for access hit. When * configured to 1 only bonus and reseved ways are probed. * when configured to 0 all ways in llcc are probed. * dis_cap_alloc: Disable capacity based allocation for a client * write_scid_en: Bit enables write cache support for a given scid. * retain_on_pc: If this bit is set and client has maitained active vote * then the ways assigned to this client are not flushed on power * collapse. * activate_on_init: Activate the slice immidiately after the SCT is programmed */ #define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, wse, rp, a) \ { \ .usecase_id = uid, \ .slice_id = sid, \ .max_cap = mc, \ .priority = p, \ .fixed_size = fs, \ .bonus_ways = bway, \ .res_ways = rway, \ .cache_mode = cmod, \ .probe_target_ways = ptw, \ .dis_cap_alloc = dca, \ .write_scid_en = wse, \ .retain_on_pc = rp, \ .activate_on_init = a, \ } static struct llcc_slice_config lagoon_data[] = { SCT_ENTRY(LLCC_CPUSS, 1, 768, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 1), SCT_ENTRY(LLCC_MDM, 8, 256, 2, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPUHTW, 11, 256, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPU, 12, 256, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_MDMPNG, 21, 768, 1, 1, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_NPU, 23, 768, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), }; static int lagoon_qcom_llcc_probe(struct platform_device *pdev) { return qcom_llcc_probe(pdev, lagoon_data, ARRAY_SIZE(lagoon_data)); } static const struct of_device_id lagoon_qcom_llcc_of_match[] = { { .compatible = "lagoon-llcc-v1", }, { }, }; static struct platform_driver lagoon_qcom_llcc_driver = { .driver = { .name = "lagoon-llcc", .of_match_table = lagoon_qcom_llcc_of_match, }, .probe = lagoon_qcom_llcc_probe, }; module_platform_driver(lagoon_qcom_llcc_driver); MODULE_DESCRIPTION("QCOM lagoon LLCC driver"); MODULE_LICENSE("GPL v2"); Loading
drivers/soc/qcom/Kconfig +9 −0 Original line number Diff line number Diff line Loading @@ -133,6 +133,15 @@ config QCOM_LITO_LLCC data required to configure LLCC so that clients can start using the LLCC slices. config QCOM_LAGOON_LLCC tristate "Qualcomm Technologies, Inc. LAGOON LLCC driver" depends on QCOM_LLCC help Qualcomm Technologies, Inc. platform specific LLCC driver for LAGOON. Say yes here to enable the LLCC driver for LAGOON. This provides data required to configure LLCC so that clients can start using the LLCC slices. config QCOM_SDM845_LLCC tristate "Qualcomm Technologies, Inc. SDM845 LLCC driver" depends on QCOM_LLCC Loading
drivers/soc/qcom/Makefile +1 −0 Original line number Diff line number Diff line Loading @@ -24,6 +24,7 @@ obj-$(CONFIG_QCOM_IPCC) += qcom_ipcc.o obj-$(CONFIG_QCOM_LLCC) += llcc-slice.o obj-$(CONFIG_QCOM_KONA_LLCC) += llcc-kona.o obj-$(CONFIG_QCOM_LITO_LLCC) += llcc-lito.o obj-$(CONFIG_QCOM_LAGOON_LLCC) += llcc-lagoon.o obj-$(CONFIG_QCOM_LLCC_PERFMON) += llcc_perfmon.o obj-$(CONFIG_QCOM_APR) += apr.o obj-$(CONFIG_QCOM_SECURE_BUFFER) += secure_buffer.o Loading
drivers/soc/qcom/llcc-lagoon.c 0 → 100644 +83 −0 Original line number Diff line number Diff line // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2020, The Linux Foundation. All rights reserved. * */ #include <linux/kernel.h> #include <linux/module.h> #include <linux/of.h> #include <linux/platform_device.h> #include <linux/soc/qcom/llcc-qcom.h> /* * SCT entry contains of the following parameters * uid: Unique id for the client's use case * slice_id: llcc slice id for each client * max_cap: The maximum capacity of the cache slice provided in KB * priority: Priority of the client used to select victim line for replacement * fixed_size: Determine of the slice has a fixed capacity * bonus_ways: Bonus ways to be used by any slice, bonus way is used only if * it't not a reserved way. * res_ways: Reserved ways for the cache slice, the reserved ways cannot be used * by any other client than the one its assigned to. * cache_mode: Each slice operates as a cache, this controls the mode of the * slice normal or TCM * probe_target_ways: Determines what ways to probe for access hit. When * configured to 1 only bonus and reseved ways are probed. * when configured to 0 all ways in llcc are probed. * dis_cap_alloc: Disable capacity based allocation for a client * write_scid_en: Bit enables write cache support for a given scid. * retain_on_pc: If this bit is set and client has maitained active vote * then the ways assigned to this client are not flushed on power * collapse. * activate_on_init: Activate the slice immidiately after the SCT is programmed */ #define SCT_ENTRY(uid, sid, mc, p, fs, bway, rway, cmod, ptw, dca, wse, rp, a) \ { \ .usecase_id = uid, \ .slice_id = sid, \ .max_cap = mc, \ .priority = p, \ .fixed_size = fs, \ .bonus_ways = bway, \ .res_ways = rway, \ .cache_mode = cmod, \ .probe_target_ways = ptw, \ .dis_cap_alloc = dca, \ .write_scid_en = wse, \ .retain_on_pc = rp, \ .activate_on_init = a, \ } static struct llcc_slice_config lagoon_data[] = { SCT_ENTRY(LLCC_CPUSS, 1, 768, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 1), SCT_ENTRY(LLCC_MDM, 8, 256, 2, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPUHTW, 11, 256, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_GPU, 12, 256, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_MDMPNG, 21, 768, 1, 1, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), SCT_ENTRY(LLCC_NPU, 23, 768, 1, 0, 0xFFF, 0x0, 0, 0, 0, 0, 1, 0), }; static int lagoon_qcom_llcc_probe(struct platform_device *pdev) { return qcom_llcc_probe(pdev, lagoon_data, ARRAY_SIZE(lagoon_data)); } static const struct of_device_id lagoon_qcom_llcc_of_match[] = { { .compatible = "lagoon-llcc-v1", }, { }, }; static struct platform_driver lagoon_qcom_llcc_driver = { .driver = { .name = "lagoon-llcc", .of_match_table = lagoon_qcom_llcc_of_match, }, .probe = lagoon_qcom_llcc_probe, }; module_platform_driver(lagoon_qcom_llcc_driver); MODULE_DESCRIPTION("QCOM lagoon LLCC driver"); MODULE_LICENSE("GPL v2");
