Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 5816fbbf authored by Alan Cox's avatar Alan Cox Committed by Jeff Garzik
Browse files

pata_it8213: Cable detect 



Another not-quite PIIX, another cable type conversion

Signed-off-by: default avatarAlan Cox <alan@redhat.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent a0fcdc02

drivers/ata/pata_it8213.c

+23 −13
Original line number Diff line number Diff line
@@ -25,8 +25,8 @@ 
 *	it8213_pre_reset	-	check for 40/80 pin

 *	@ap: Port

 *

 *	Perform cable detection for the 8213 ATA interface. This is

 *	different to the PIIX arrangement

 *	Filter out ports by the enable bits before doing the normal reset

 *	and probe.

 */



static int it8213_pre_reset(struct ata_port *ap)
@@ -34,23 +34,14 @@ static int it8213_pre_reset(struct ata_port *ap) 
	static const struct pci_bits it8213_enable_bits[] = {

		{ 0x41U, 1U, 0x80UL, 0x80UL },	/* port 0 */

	};



	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

	u8 tmp;



	if (!pci_test_config_bits(pdev, &it8213_enable_bits[ap->port_no]))

		return -ENOENT;



	pci_read_config_byte(pdev, 0x42, &tmp);

	if (tmp & 2)	/* The initial docs are incorrect */

		ap->cbl = ATA_CBL_PATA40;

	else

		ap->cbl = ATA_CBL_PATA80;

	return ata_std_prereset(ap);

}



/**

 *	it8213_probe_reset - Probe specified port on PATA host controller

 *	it8213_error_handler - Probe specified port on PATA host controller

 *	@ap: Port to probe

 *

 *	LOCKING:
@@ -62,10 +53,28 @@ static void it8213_error_handler(struct ata_port *ap) 
	ata_bmdma_drive_eh(ap, it8213_pre_reset, ata_std_softreset, NULL, ata_std_postreset);

}



/**

 *	it8213_cable_detect	-	check for 40/80 pin

 *	@ap: Port

 *

 *	Perform cable detection for the 8213 ATA interface. This is

 *	different to the PIIX arrangement

 */



static int it8213_cable_detect(struct ata_port *ap)

{

	struct pci_dev *pdev = to_pci_dev(ap->host->dev);

	u8 tmp;

	pci_read_config_byte(pdev, 0x42, &tmp);

	if (tmp & 2)	/* The initial docs are incorrect */

		return ATA_CBL_PATA40;

	return ATA_CBL_PATA80;

}



/**

 *	it8213_set_piomode - Initialize host controller PATA PIO timings

 *	@ap: Port whose timings we are configuring

 *	@adev: um

 *	@adev: Device whose timings we are configuring

 *

 *	Set PIO mode for device, in host controller PCI config space.

 *
@@ -268,6 +277,7 @@ static const struct ata_port_operations it8213_ops = { 
	.thaw			= ata_bmdma_thaw,

	.error_handler		= it8213_error_handler,

	.post_internal_cmd	= ata_bmdma_post_internal_cmd,

	.cable_detect		= it8213_cable_detect,



	.bmdma_setup		= ata_bmdma_setup,

	.bmdma_start		= ata_bmdma_start,