drivers: soc: qcom: Add bam dmux driver support

Qualcomm Technologies, Inc. BAM Data Multiplexer Driver

Required properties:

- compatible : should be "qcom,bam_dmux"

- reg : the location and size of the BAM hardware

- interrupts : the BAM hardware to apps processor interrupt line

Optional properties:

-qcom,satellite-mode: the hardware needs to be configured in satellite mode

-qcom,rx-ring-size: the size of the receive ring buffer pool, default is 32

-qcom,max-rx-mtu: the maximum receive MTU that can be negotiated, in bytes.

	Default is 2048.  Other possible values are 4096, 8192, and 16384.

-qcom,no-cpu-affinity: boolean value indicating that workqueue CPU affinity

	is not required.

-qcom,fast-shutdown: boolean value to support fast shutdown time.

Example:

	qcom,bam_dmux@fc834000 {

		compatible = "qcom,bam_dmux";

		reg = <0xfc834000 0x7000>;

		interrupts = <0 29 1>;

		qcom,satellite-mode;

		qcom,rx-ring-size = <64>;

		qcom,max-rx-mtu = <8192>;

		qcom,no-cpu-affinity;

		qcom,fast-shutdown;

	};

	  This driver sends message over QMI to the service which is running on

	  This driver sends message over QMI to the service which is running on

	  ADSP.

	  ADSP.

config MSM_BAM_DMUX

	bool "BAM Data Mux Driver"

	depends on SPS

	help

	  Support Muxed Data Channels over BAM interface.

	  BAM has a limited number of pipes.  This driver

	  provides a means to support more logical channels

	  via muxing than BAM could without muxing.

endmenu

endmenu

config QCOM_HYP_CORE_CTL

config QCOM_HYP_CORE_CTL

obj-$(CONFIG_RMNET_CTL) += rmnet_ctl/

obj-$(CONFIG_RMNET_CTL) += rmnet_ctl/

obj-$(CONFIG_QCOM_ADSP_MANUAL_VOTE) += adsp_vote_qmi.o adsp_lpm_voting_v01.o

obj-$(CONFIG_QCOM_ADSP_MANUAL_VOTE) += adsp_vote_qmi.o adsp_lpm_voting_v01.o

obj-$(CONFIG_CPU_V7) += idle-v7.o

obj-$(CONFIG_CPU_V7) += idle-v7.o

obj-$(CONFIG_MSM_BAM_DMUX) += bam_dmux.o

/* Copyright (c) 2013-2014, 2019 The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

#ifndef _BAM_DMUX_PRIVATE_H

#define _BAM_DMUX_PRIVATE_H

#include <linux/types.h>

#include <linux/dma-mapping.h>

#include <linux/msm-sps.h>

#define BAM_MUX_HDR_MAGIC_NO			0x33fc

#define BAM_MUX_HDR_CMD_DATA			0

#define BAM_MUX_HDR_CMD_OPEN			1

#define BAM_MUX_HDR_CMD_CLOSE			2

#define BAM_MUX_HDR_CMD_STATUS			3 /* unused */

#define BAM_MUX_HDR_CMD_OPEN_NO_A2_PC		4

#define DEFAULT_BUFFER_SIZE			SZ_2K

#define DYNAMIC_MTU_MASK			0x2

#define MTU_SIZE_MASK				0xc0

#define MTU_SIZE_SHIFT				0x6

#define DL_POOL_SIZE_SHIFT			0x4

/**

 * struct bam_ops_if - collection of function pointers to allow swappable

 * runtime functionality

 * @smsm_change_state_ptr: pointer to smsm_change_state function

 * @smsm_get_state_ptr: pointer to smsm_get_state function

 * @smsm_state_cb_register_ptr: pointer to smsm_state_cb_register function

 * @smsm_state_cb_deregister_ptr: pointer to smsm_state_cb_deregister function

 * @sps_connect_ptr: pointer to sps_connect function

 * @sps_disconnect_ptr: pointer to sps_disconnect function

 * @sps_register_bam_device_ptr: pointer to sps_register_bam_device

 * @sps_deregister_bam_device_ptr: pointer to sps_deregister_bam_device

 * function

 * @sps_alloc_endpoint_ptr: pointer to sps_alloc_endpoint function

 * @sps_free_endpoint_ptr: pointer to sps_free_endpoint function

 * @sps_set_config_ptr: pointer to sps_set_config function

 * @sps_get_config_ptr: pointer to sps_get_config function

 * @sps_device_reset_ptr: pointer to sps_device_reset function

 * @sps_register_event_ptr: pointer to sps_register_event function

 * @sps_transfer_one_ptr: pointer to sps_transfer_one function

 * @sps_get_iovec_ptr: pointer to sps_get_iovec function

 * @sps_get_unused_desc_num_ptr: pointer to sps_get_unused_desc_num function

 * @dma_to: enum for the direction of dma operations to device

 * @dma_from: enum for the direction of dma operations from device

 *

 * This struct contains the interface from bam_dmux to smsm and sps. The

 * pointers can be swapped out at run time to provide different functionality.

 */

struct bam_ops_if {

	/* smsm */

	int (*smsm_change_state_ptr)(uint32_t smsm_entry,

		uint32_t clear_mask, uint32_t set_mask);

	uint32_t (*smsm_get_state_ptr)(uint32_t smsm_entry);

	int (*smsm_state_cb_register_ptr)(uint32_t smsm_entry, uint32_t mask,

		void (*notify)(void *, uint32_t old_state, uint32_t new_state),

		void *data);

	int (*smsm_state_cb_deregister_ptr)(uint32_t smsm_entry, uint32_t mask,

		void (*notify)(void *, uint32_t, uint32_t), void *data);

	/* sps */

	int (*sps_connect_ptr)(struct sps_pipe *h, struct sps_connect *connect);

	int (*sps_disconnect_ptr)(struct sps_pipe *h);

	int (*sps_register_bam_device_ptr)(

		const struct sps_bam_props *bam_props,

		unsigned long *dev_handle);

	int (*sps_deregister_bam_device_ptr)(unsigned long dev_handle);

	struct sps_pipe *(*sps_alloc_endpoint_ptr)(void);

	int (*sps_free_endpoint_ptr)(struct sps_pipe *h);

	int (*sps_set_config_ptr)(struct sps_pipe *h,

		struct sps_connect *config);

	int (*sps_get_config_ptr)(struct sps_pipe *h,

		struct sps_connect *config);

	int (*sps_device_reset_ptr)(unsigned long dev);

	int (*sps_register_event_ptr)(struct sps_pipe *h,

		struct sps_register_event *reg);

	int (*sps_transfer_one_ptr)(struct sps_pipe *h,

		phys_addr_t addr, u32 size,

		void *user, u32 flags);

	int (*sps_get_iovec_ptr)(struct sps_pipe *h,

		struct sps_iovec *iovec);

	int (*sps_get_unused_desc_num_ptr)(struct sps_pipe *h,

		u32 *desc_num);

	enum dma_data_direction dma_to;

	enum dma_data_direction dma_from;

};

/**

 * struct bam_mux_hdr - struct which contains bam dmux header info

 * @magic_num: magic number placed at start to ensure that it is actually a

 * valid bam dmux header

 * @signal: optional signaling bits with commmand type specific definitions

 * @cmd: the command

 * @pad_len: the length of padding

 * @ch_id: the id of the bam dmux channel that this is sent on

 * @pkt_len: the length of the packet that this is the header of

 */

struct bam_mux_hdr {

	uint16_t magic_num;

	uint8_t signal;

	uint8_t cmd;

	uint8_t pad_len;

	uint8_t ch_id;

	uint16_t pkt_len;

};

/**

 * struct rx_pkt_info - struct describing an rx packet

 * @skb: socket buffer containing the packet

 * @dma_address: dma mapped address of the packet

 * @work: work_struct for processing the packet

 * @list_node: list_head for placing this on a list

 * @sps_size: size of the sps_iovec for this packet

 * @len: total length of the buffer containing this packet

 */

struct rx_pkt_info {

	struct sk_buff *skb;

	dma_addr_t dma_address;

	struct work_struct work;

	struct list_head list_node;

	uint16_t sps_size;

	uint16_t len;

};

/**

 * struct tx_pkt_info - struct describing a tx packet

 * @skb: socket buffer containing the packet

 * @dma_address: dma mapped address of the packet

 * @is_cmd: signifies whether this is a command or data packet

 * @len: length og the packet

 * @work: work_struct for processing this packet

 * @list_node: list_head for placing this on a list

 * @ts_sec: seconds portion of the timestamp

 * @ts_nsec: nanoseconds portion of the timestamp

 *

 */

struct tx_pkt_info {

	struct sk_buff *skb;

	dma_addr_t dma_address;

	char is_cmd;

	uint32_t len;

	struct work_struct work;

	struct list_head list_node;

	unsigned int ts_sec;

	unsigned long ts_nsec;

};

void msm_bam_dmux_set_bam_ops(struct bam_ops_if *ops);

void msm_bam_dmux_deinit(void);

void msm_bam_dmux_reinit(void);

#endif /* _BAM_DMUX_PRIVATE_H */