Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4c04ef25 authored by Mark Brown's avatar Mark Brown
Browse files

Merge remote-tracking branches 'regulator/topic/palmas',... 

Merge remote-tracking branches 'regulator/topic/palmas', 'regulator/topic/pbias', 'regulator/topic/pfuze100', 'regulator/topic/s2mpa01' and 'regulator/topic/s2mps11' into regulator-next
parents 2c7a6a35 dbabd624 0ee42bb1 ab3ca774 0608032a b203e0df

Documentation/devicetree/bindings/mfd/s2mps11.txt

+14 −0
Original line number Diff line number Diff line
@@ -56,6 +56,20 @@ for a particular group of BUCKs. So provide same regulator-ramp-delay<value>. 
Grouping of BUCKs sharing ramp rate setting is as follow : BUCK[1, 6],

BUCK[3, 4], and BUCK[7, 8, 10]



On S2MPS14 the LDO10, LDO11 and LDO12 can be configured to external control

over GPIO. To turn this feature on this property must be added to the regulator

sub-node:

	- samsung,ext-control-gpios: GPIO specifier for one GPIO

		controlling this regulator (enable/disable);

Example:

	LDO12 {

		regulator-name = "V_EMMC_2.8V";

		regulator-min-microvolt = <2800000>;

		regulator-max-microvolt = <2800000>;

		samsung,ext-control-gpios = <&gpk0 2 0>;

	};





The regulator constraints inside the regulator nodes use the standard regulator

bindings which are documented elsewhere.

drivers/regulator/palmas-regulator.c

+26 −132
Original line number Diff line number Diff line
@@ -36,6 +36,18 @@ struct regs_info { 
	int	sleep_id;

};



static const struct regulator_linear_range smps_low_ranges[] = {

	REGULATOR_LINEAR_RANGE(500000, 0x1, 0x6, 0),

	REGULATOR_LINEAR_RANGE(510000, 0x7, 0x79, 10000),

	REGULATOR_LINEAR_RANGE(1650000, 0x7A, 0x7f, 0),

};



static const struct regulator_linear_range smps_high_ranges[] = {

	REGULATOR_LINEAR_RANGE(1000000, 0x1, 0x6, 0),

	REGULATOR_LINEAR_RANGE(1020000, 0x7, 0x79, 20000),

	REGULATOR_LINEAR_RANGE(3300000, 0x7A, 0x7f, 0),

};



static const struct regs_info palmas_regs_info[] = {

	{

		.name		= "SMPS12",
@@ -280,54 +292,6 @@ static int palmas_ldo_write(struct palmas *palmas, unsigned int reg, 
	return regmap_write(palmas->regmap[REGULATOR_SLAVE], addr, value);

}



static int palmas_is_enabled_smps(struct regulator_dev *dev)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(dev);

	int id = rdev_get_id(dev);

	unsigned int reg;



	palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, &reg);



	reg &= PALMAS_SMPS12_CTRL_STATUS_MASK;

	reg >>= PALMAS_SMPS12_CTRL_STATUS_SHIFT;



	return !!(reg);

}



static int palmas_enable_smps(struct regulator_dev *dev)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(dev);

	int id = rdev_get_id(dev);

	unsigned int reg;



	palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, &reg);



	reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;

	if (pmic->current_reg_mode[id])

		reg |= pmic->current_reg_mode[id];

	else

		reg |= SMPS_CTRL_MODE_ON;



	palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);



	return 0;

}



static int palmas_disable_smps(struct regulator_dev *dev)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(dev);

	int id = rdev_get_id(dev);

	unsigned int reg;



	palmas_smps_read(pmic->palmas, palmas_regs_info[id].ctrl_addr, &reg);



	reg &= ~PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;



	palmas_smps_write(pmic->palmas, palmas_regs_info[id].ctrl_addr, reg);



	return 0;

}



static int palmas_set_mode_smps(struct regulator_dev *dev, unsigned int mode)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(dev);
@@ -382,81 +346,6 @@ static unsigned int palmas_get_mode_smps(struct regulator_dev *dev) 
	return 0;

}



static int palmas_list_voltage_smps(struct regulator_dev *dev,

					unsigned selector)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(dev);

	int id = rdev_get_id(dev);

	int mult = 1;



	/* Read the multiplier set in VSEL register to return

	 * the correct voltage.

	 */

	if (pmic->range[id])

		mult = 2;



	if (selector == 0)

		return 0;

	else if (selector < 6)

		return 500000 * mult;

	else

		/* Voltage is linear mapping starting from selector 6,

		 * volt = (0.49V + ((selector - 5) * 0.01V)) * RANGE

		 * RANGE is either x1 or x2

		 */

		return (490000 + ((selector - 5) * 10000)) * mult;

}



static int palmas_map_voltage_smps(struct regulator_dev *rdev,

		int min_uV, int max_uV)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(rdev);

	int id = rdev_get_id(rdev);

	int ret, voltage;



	if (min_uV == 0)

		return 0;



	if (pmic->range[id]) { /* RANGE is x2 */

		if (min_uV < 1000000)

			min_uV = 1000000;

		ret = DIV_ROUND_UP(min_uV - 1000000, 20000) + 6;

	} else {		/* RANGE is x1 */

		if (min_uV < 500000)

			min_uV = 500000;

		ret = DIV_ROUND_UP(min_uV - 500000, 10000) + 6;

	}



	/* Map back into a voltage to verify we're still in bounds */

	voltage = palmas_list_voltage_smps(rdev, ret);

	if (voltage < min_uV || voltage > max_uV)

		return -EINVAL;



	return ret;

}



static int palma_smps_set_voltage_smps_time_sel(struct regulator_dev *rdev,

	unsigned int old_selector, unsigned int new_selector)

{

	struct palmas_pmic *pmic = rdev_get_drvdata(rdev);

	int id = rdev_get_id(rdev);

	int old_uv, new_uv;

	unsigned int ramp_delay = pmic->ramp_delay[id];



	if (!ramp_delay)

		return 0;



	old_uv = palmas_list_voltage_smps(rdev, old_selector);

	if (old_uv < 0)

		return old_uv;



	new_uv = palmas_list_voltage_smps(rdev, new_selector);

	if (new_uv < 0)

		return new_uv;



	return DIV_ROUND_UP(abs(old_uv - new_uv), ramp_delay);

}



static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev,

		 int ramp_delay)

{
@@ -493,16 +382,16 @@ static int palmas_smps_set_ramp_delay(struct regulator_dev *rdev, 
}



static struct regulator_ops palmas_ops_smps = {

	.is_enabled		= palmas_is_enabled_smps,

	.enable			= palmas_enable_smps,

	.disable		= palmas_disable_smps,

	.is_enabled		= regulator_is_enabled_regmap,

	.enable			= regulator_enable_regmap,

	.disable		= regulator_disable_regmap,

	.set_mode		= palmas_set_mode_smps,

	.get_mode		= palmas_get_mode_smps,

	.get_voltage_sel	= regulator_get_voltage_sel_regmap,

	.set_voltage_sel	= regulator_set_voltage_sel_regmap,

	.list_voltage		= palmas_list_voltage_smps,

	.map_voltage		= palmas_map_voltage_smps,

	.set_voltage_time_sel	= palma_smps_set_voltage_smps_time_sel,

	.list_voltage		= regulator_list_voltage_linear_range,

	.map_voltage		= regulator_map_voltage_linear_range,

	.set_voltage_time_sel	= regulator_set_voltage_time_sel,

	.set_ramp_delay		= palmas_smps_set_ramp_delay,

};
@@ -511,9 +400,9 @@ static struct regulator_ops palmas_ops_ext_control_smps = { 
	.get_mode		= palmas_get_mode_smps,

	.get_voltage_sel	= regulator_get_voltage_sel_regmap,

	.set_voltage_sel	= regulator_set_voltage_sel_regmap,

	.list_voltage		= palmas_list_voltage_smps,

	.map_voltage		= palmas_map_voltage_smps,

	.set_voltage_time_sel	= palma_smps_set_voltage_smps_time_sel,

	.list_voltage		= regulator_list_voltage_linear_range,

	.map_voltage		= regulator_map_voltage_linear_range,

	.set_voltage_time_sel	= regulator_set_voltage_time_sel,

	.set_ramp_delay		= palmas_smps_set_ramp_delay,

};
@@ -1042,12 +931,17 @@ static int palmas_regulators_probe(struct platform_device *pdev) 
			 * ranges. Read the current smps mode for later use.

			 */

			addr = palmas_regs_info[id].vsel_addr;

			pmic->desc[id].n_linear_ranges = 3;



			ret = palmas_smps_read(pmic->palmas, addr, &reg);

			if (ret)

				return ret;

			if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)

				pmic->range[id] = 1;

			if (pmic->range[id])

				pmic->desc[id].linear_ranges = smps_high_ranges;

			else

				pmic->desc[id].linear_ranges = smps_low_ranges;



			if (reg_init && reg_init->roof_floor)

				pmic->desc[id].ops =

drivers/regulator/pbias-regulator.c

+4 −25
Original line number Diff line number Diff line
@@ -49,33 +49,13 @@ static const unsigned int pbias_volt_table[] = { 
	3000000

};



static int pbias_regulator_enable(struct regulator_dev *rdev)

{

	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);

	const struct pbias_reg_info *info = data->info;



	return regmap_update_bits(data->syscon, rdev->desc->enable_reg,

				  info->enable_mask, info->enable);

}



static int pbias_regulator_is_enable(struct regulator_dev *rdev)

{

	struct pbias_regulator_data *data = rdev_get_drvdata(rdev);

	const struct pbias_reg_info *info = data->info;

	int value;



	regmap_read(data->syscon, rdev->desc->enable_reg, &value);



	return (value & info->enable_mask) == info->enable;

}



static struct regulator_ops pbias_regulator_voltage_ops = {

	.list_voltage = regulator_list_voltage_table,

	.get_voltage_sel = regulator_get_voltage_sel_regmap,

	.set_voltage_sel = regulator_set_voltage_sel_regmap,

	.enable = pbias_regulator_enable,

	.enable = regulator_enable_regmap,

	.disable = regulator_disable_regmap,

	.is_enabled = pbias_regulator_is_enable,

	.is_enabled = regulator_is_enabled_regmap,

};



static const struct pbias_reg_info pbias_mmc_omap2430 = {
@@ -142,10 +122,8 @@ static int pbias_regulator_probe(struct platform_device *pdev) 


	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct pbias_regulator_data)

			       * count, GFP_KERNEL);

	if (drvdata == NULL) {

		dev_err(&pdev->dev, "Failed to allocate device data\n");

	if (!drvdata)

		return -ENOMEM;

	}



	syscon = syscon_regmap_lookup_by_phandle(np, "syscon");

	if (IS_ERR(syscon))
@@ -180,6 +158,7 @@ static int pbias_regulator_probe(struct platform_device *pdev) 
		drvdata[data_idx].desc.vsel_mask = info->vmode;

		drvdata[data_idx].desc.enable_reg = res->start;

		drvdata[data_idx].desc.enable_mask = info->enable_mask;

		drvdata[data_idx].desc.enable_val = info->enable;



		cfg.init_data = pbias_matches[idx].init_data;

		cfg.driver_data = &drvdata[data_idx];

drivers/regulator/pfuze100-regulator.c

+8 −0
Original line number Diff line number Diff line
@@ -125,6 +125,9 @@ static struct regulator_ops pfuze100_ldo_regulator_ops = { 
};



static struct regulator_ops pfuze100_fixed_regulator_ops = {

	.enable = regulator_enable_regmap,

	.disable = regulator_disable_regmap,

	.is_enabled = regulator_is_enabled_regmap,

	.list_voltage = regulator_list_voltage_linear,

};
@@ -137,6 +140,8 @@ static struct regulator_ops pfuze100_sw_regulator_ops = { 
};



static struct regulator_ops pfuze100_swb_regulator_ops = {

	.enable = regulator_enable_regmap,

	.disable = regulator_disable_regmap,

	.list_voltage = regulator_list_voltage_table,

	.map_voltage = regulator_map_voltage_ascend,

	.set_voltage_sel = regulator_set_voltage_sel_regmap,
@@ -189,6 +194,8 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { 
			.volt_table = voltages,	\

			.vsel_reg = (base),	\

			.vsel_mask = (mask),	\

			.enable_reg = (base),	\

			.enable_mask = 0x48,	\

		},	\

	}
@@ -502,6 +509,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, 
		config.init_data = init_data;

		config.driver_data = pfuze_chip;

		config.of_node = match_of_node(i);

		config.ena_gpio = -EINVAL;



		pfuze_chip->regulators[i] =

			devm_regulator_register(&client->dev, desc, &config);

drivers/regulator/s2mpa01.c

+11 −7
Original line number Diff line number Diff line
@@ -61,7 +61,7 @@ static int s2mpa01_regulator_set_voltage_time_sel(struct regulator_dev *rdev, 
	unsigned int ramp_delay = 0;

	int old_volt, new_volt;



	switch (rdev->desc->id) {

	switch (rdev_get_id(rdev)) {

	case S2MPA01_BUCK2:

	case S2MPA01_BUCK4:

		ramp_delay = s2mpa01->ramp_delay24;
@@ -102,7 +102,7 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) 
	unsigned int ramp_enable = 1, enable_shift = 0;

	int ret;



	switch (rdev->desc->id) {

	switch (rdev_get_id(rdev)) {

	case S2MPA01_BUCK1:

		enable_shift = S2MPA01_BUCK1_RAMP_EN_SHIFT;

		if (!ramp_delay) {
@@ -191,12 +191,16 @@ static int s2mpa01_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) 
	if (!ramp_enable)

		goto ramp_disable;



	/* Ramp delay can be enabled/disabled only for buck[1234] */

	if (rdev_get_id(rdev) >= S2MPA01_BUCK1 &&

			rdev_get_id(rdev) <= S2MPA01_BUCK4) {

		ret = regmap_update_bits(rdev->regmap, S2MPA01_REG_RAMP1,

					 1 << enable_shift, 1 << enable_shift);

		if (ret) {

			dev_err(&rdev->dev, "failed to enable ramp rate\n");

			return ret;

		}

	}



	ramp_val = get_ramp_delay(ramp_delay);