Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 4a5a4c6d authored by Jack Pham's avatar Jack Pham
Browse files

usb: phy: Add snapshot of QTI USB PHY drivers 



This change adds USB HSUSB and USB QMP PHY drivers used
on QTI MSM platforms. This snapshot is taken as of
msm-4.9 commit 11273b09e247 ("usb: phy: msm: Remove
phy-msm-usb driver").

Change-Id: I9f349baa5878f7f2a696dc52f048ead54a831c05
Signed-off-by: default avatarJack Pham <jackp@codeaurora.org>
parent 21438a7d

Documentation/devicetree/bindings/usb/qcom,msm-phy.txt

0 → 100644
+131 −0
Original line number Diff line number Diff line 
QCOM USB PHY transceivers



HSUSB PHY



Required properties:

 - compatible: Should be "qcom,usb-hsphy-snps-femto"

 - reg: Address and length of the register set for the device

   Required regs are:

	"hsusb_phy_base" : the base register for the PHY

 - <supply-name>-supply: phandle to the regulator device tree node

   Required "supply-name" examples are:

	"vdd" : vdd supply for HSPHY digital circuit operation

	"vdda18" : 1.8v supply for HSPHY

	"vdda33" : 3.3v supply for HSPHY

 - clocks: a list of phandles to the PHY clocks. Use as per

   Documentation/devicetree/bindings/clock/clock-bindings.txt

 - clock-names: Names of the clocks in 1-1 correspondence with the "clocks"

   property. "ref_clk_src" is a mandatory clock.

 - qcom,vdd-voltage-level: This property must be a list of three integer

   values (no, min, max) where each value represents either a voltage in

   microvolts or a value corresponding to voltage corner

 - resets: reset specifier pair consists of phandle for the reset controller

   and reset lines used by this controller.

 - reset-names: reset signal name strings sorted in the same order as the resets

   property.



Example:

	hsphy@f9200000 {

		compatible = "qcom,usb-hsphy-snps-femto";

		reg = <0xff1000 0x400>;

		vdd-supply = <&pm8841_s2_corner>;

		vdda18-supply = <&pm8941_l6>;

		vdda33-supply = <&pm8941_l24>;

		qcom,vdd-voltage-level = <0 872000 872000>;

	};



SSUSB-QMP PHY



Required properties:

 - compatible: Should be "qcom,usb-ssphy-qmp", "qcom,usb-ssphy-qmp-v1" or

   "qcom,usb-ssphy-qmp-v2" or "qcom,usb-ssphy-qmp-usb3-or-dp" or

   "qcom,usb-ssphy-qmp-dp-combo"

 - reg: Address and length of the register set for the device

   Required regs are:

   "qmp_phy_base" : QMP PHY Base register set.

 - "vls_clamp_reg" : top-level CSR register to be written to enable phy vls

   clamp which allows phy to detect autonomous mode. (optional for USB DP PHY)

 - <supply-name>-supply: phandle to the regulator device tree node

   Required "supply-name" examples are:

	"vdd" : vdd supply for SSPHY digital circuit operation

	"core" : high-voltage analog supply for SSPHY

 - clocks: a list of phandles to the PHY clocks. Use as per

   Documentation/devicetree/bindings/clock/clock-bindings.txt

 - clock-names: Names of the clocks in 1-1 correspondence with the "clocks"

   property. Required clocks are "aux_clk" and "pipe_clk".

 - qcom,vdd-voltage-level: This property must be a list of three integer

   values (no, min, max) where each value represents either a voltage in

   microvolts or a value corresponding to voltage corner

 - qcom,qmp-phy-init-seq: QMP PHY initialization sequence with reg offset, its

   value, delay after register write. It is not must property to have for emulation.

 - qcom,qmp-phy-reg-offset: Provides important phy register offsets in an order

   defined in the phy driver.

   Provide below mentioned register offsets in order for non USB DP combo PHY:

   USB3_PHY_PCS_STATUS,

   USB3_PHY_AUTONOMOUS_MODE_CTRL,

   USB3_PHY_LFPS_RXTERM_IRQ_CLEAR,

   USB3_PHY_POWER_DOWN_CONTROL,

   USB3_PHY_SW_RESET,

   USB3_PHY_START



   In addion to above following set of registers offset needed for USB DP combo PHY in mentioned order:

   USB3_DP_DP_PHY_PD_CTL,

   USB3_DP_COM_POWER_DOWN_CTRL,

   USB3_DP_COM_SW_RESET,

   USB3_DP_COM_RESET_OVRD_CTRL,

   USB3_DP_COM_PHY_MODE_CTRL,

   USB3_DP_COM_TYPEC_CTRL,

   USB3_DP_COM_SWI_CTRL,

   USB3_PCS_MISC_CLAMP_ENABLE



   Optional register for configuring USB Type-C port select if available:

   USB3_PHY_PCS_MISC_TYPEC_CTRL



- resets: reset specifier pair consists of phandle for the reset controller

  and reset lines used by this controller.

- reset-names: reset signal name strings sorted in the same order as the resets

  property.



Optional properties:

 - reg: Additional register set of address and length to control QMP PHY are:

   "tcsr_usb3_dp_phymode" : top-level CSR register to be written to select

   super speed usb qmp phy.

 - clocks: a list of phandles to the PHY clocks. Use as per

   Documentation/devicetree/bindings/clock/clock-bindings.txt

 - clock-names: Names of the clocks in 1-1 correspondence with the "clocks"

   property. "cfg_ahb_clk" and "com_aux_clk" are an optional clocks.

 - qcom,vbus-valid-override: If present, indicates VBUS pin is not connected to

   the USB PHY and the controller must rely on external VBUS notification in

   order to manually relay the notification to the SSPHY.

 - qcom,emulation: Indicates that we are running on emulation platform.

 - qcom,core-voltage-level: This property must be a list of three integer

   values (no, min, max) where each value represents either a voltage in

   microvolts or a value corresponding to voltage corner.



Example:

	ssphy0: ssphy@f9b38000 {

		compatible = "qcom,usb-ssphy-qmp";

		reg = <0xf9b38000 0x16c>,

			<0x01947244 0x4>;

		reg-names = "qmp_phy_base",

			"vls_clamp_reg";

		vdd-supply = <&pmd9635_l4>;

		vdda18-supply = <&pmd9635_l8>;

		qcom,vdd-voltage-level = <0 900000 1050000>;

		qcom,vbus-valid-override;



		clocks = <&clock_gcc clk_gcc_usb3_phy_aux_clk>,

			 <&clock_gcc clk_gcc_usb3_phy_pipe_clk>,

			 <&clock_gcc clk_gcc_usb_phy_cfg_ahb2phy_clk>,

			 <&clock_gcc clk_ln_bb_clk1>,

			 <&clock_gcc clk_gcc_usb3_clkref_clk>;



		clock-names = "aux_clk", "pipe_clk", "cfg_ahb_clk",

			      "ref_clk_src", "ref_clk";



		resets = <&clock_gcc GCC_USB3_PHY_BCR>,

			<&clock_gcc GCC_USB3PHY_PHY_BCR>;

		reset-names = "phy_reset",

				"phy_phy_reset";



	};

drivers/usb/phy/Kconfig

+20 −0
Original line number Diff line number Diff line
@@ -196,6 +196,26 @@ config USB_QCOM_EMU_PHY 
	  To compile this driver as a module, choose M here: the

	  module will be called phy-qcom-emu.



config USB_MSM_SSPHY_QMP

	tristate "MSM SSUSB QMP PHY Driver"

	depends on ARCH_QCOM

	select USB_PHY

	help

	  Enable this to support the SuperSpeed USB transceiver on MSM chips.

	  This driver supports the PHY which uses the QSCRATCH-based register

	  set for its control sequences, normally paired with newer DWC3-based

	  SuperSpeed controllers.



config MSM_HSUSB_PHY

	tristate "MSM HSUSB PHY Driver"

	depends on ARCH_QCOM

	select USB_PHY

	help

	  Enable this to support the HSUSB PHY on MSM chips. This driver supports

	  the high-speed PHY which is usually paired with either the ChipIdea or

	  Synopsys DWC3 USB IPs on MSM SOCs. This driver expects to configure the

	  PHY with a dedicated register I/O memory region.



config USB_MV_OTG

	tristate "Marvell USB OTG support"

	depends on USB_EHCI_MV && USB_MV_UDC && PM && USB_OTG

drivers/usb/phy/Makefile

+2 −0
Original line number Diff line number Diff line
@@ -30,3 +30,5 @@ obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o 
obj-$(CONFIG_USB_ULPI)			+= phy-ulpi.o

obj-$(CONFIG_USB_ULPI_VIEWPORT)		+= phy-ulpi-viewport.o

obj-$(CONFIG_KEYSTONE_USB_PHY)		+= phy-keystone.o

obj-$(CONFIG_USB_MSM_SSPHY_QMP)     	+= phy-msm-ssusb-qmp.o

obj-$(CONFIG_MSM_HSUSB_PHY)		+= phy-msm-snps-hs.o

drivers/usb/phy/phy-msm-snps-hs.c

0 → 100644
+646 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 */



#include <linux/module.h>

#include <linux/kernel.h>

#include <linux/err.h>

#include <linux/slab.h>

#include <linux/clk.h>

#include <linux/delay.h>

#include <linux/io.h>

#include <linux/of.h>

#include <linux/platform_device.h>

#include <linux/power_supply.h>

#include <linux/regulator/consumer.h>

#include <linux/regulator/driver.h>

#include <linux/regulator/machine.h>

#include <linux/usb/phy.h>

#include <linux/reset.h>



#define USB2_PHY_USB_PHY_UTMI_CTRL0		(0x3c)

#define SLEEPM					BIT(0)



#define USB2_PHY_USB_PHY_UTMI_CTRL5		(0x50)

#define ATERESET				BIT(0)

#define POR					BIT(1)



#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0	(0x54)

#define VATESTENB_MASK				(0x3 << 0)

#define RETENABLEN				BIT(3)

#define FSEL_MASK				(0x7 << 4)

#define FSEL_DEFAULT				(0x3 << 4)



#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1	(0x58)

#define VBUSVLDEXTSEL0				BIT(4)

#define PLLBTUNE				BIT(5)



#define USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2	(0x5c)

#define VREGBYPASS				BIT(0)



#define USB2_PHY_USB_PHY_HS_PHY_CTRL1		(0x60)

#define VBUSVLDEXT0				BIT(0)



#define USB2_PHY_USB_PHY_HS_PHY_CTRL2		(0x64)

#define USB2_SUSPEND_N				BIT(2)

#define USB2_SUSPEND_N_SEL			BIT(3)



#define USB2_PHY_USB_PHY_HS_PHY_TEST0		(0x80)

#define TESTDATAIN_MASK				(0xff << 0)



#define USB2_PHY_USB_PHY_HS_PHY_TEST1		(0x84)

#define TESTDATAOUTSEL				BIT(4)

#define TOGGLE_2WR				BIT(6)



#define USB2_PHY_USB_PHY_CFG0			(0x94)

#define UTMI_PHY_CMN_CTRL_OVERRIDE_EN		BIT(1)



#define USB2_PHY_USB_PHY_REFCLK_CTRL		(0xa0)

#define REFCLK_SEL_MASK				(0x3 << 0)

#define REFCLK_SEL_DEFAULT			(0x2 << 0)



#define USB_HSPHY_3P3_VOL_MIN			3050000 /* uV */

#define USB_HSPHY_3P3_VOL_MAX			3300000 /* uV */

#define USB_HSPHY_3P3_HPM_LOAD			16000	/* uA */

#define USB_HSPHY_3P3_VOL_FSHOST		3150000 /* uV */



#define USB_HSPHY_1P8_VOL_MIN			1704000 /* uV */

#define USB_HSPHY_1P8_VOL_MAX			1800000 /* uV */

#define USB_HSPHY_1P8_HPM_LOAD			19000	/* uA */



struct msm_hsphy {

	struct usb_phy		phy;

	void __iomem		*base;



	struct clk		*ref_clk_src;

	struct clk		*cfg_ahb_clk;

	struct reset_control	*phy_reset;



	struct regulator	*vdd;

	struct regulator	*vdda33;

	struct regulator	*vdda18;

	int			vdd_levels[3]; /* none, low, high */



	bool			clocks_enabled;

	bool			power_enabled;

	bool			suspended;

	bool			cable_connected;



	/* emulation targets specific */

	void __iomem		*emu_phy_base;

	int			*emu_init_seq;

	int			emu_init_seq_len;

	int			*emu_dcm_reset_seq;

	int			emu_dcm_reset_seq_len;

};



static void msm_hsphy_enable_clocks(struct msm_hsphy *phy, bool on)

{

	dev_dbg(phy->phy.dev, "%s(): clocks_enabled:%d on:%d\n",

			__func__, phy->clocks_enabled, on);



	if (!phy->clocks_enabled && on) {

		clk_prepare_enable(phy->ref_clk_src);



		if (phy->cfg_ahb_clk)

			clk_prepare_enable(phy->cfg_ahb_clk);



		phy->clocks_enabled = true;

	}



	if (phy->clocks_enabled && !on) {

		if (phy->cfg_ahb_clk)

			clk_disable_unprepare(phy->cfg_ahb_clk);



		clk_disable_unprepare(phy->ref_clk_src);

		phy->clocks_enabled = false;

	}



}

static int msm_hsphy_config_vdd(struct msm_hsphy *phy, int high)

{

	int min, ret;



	min = high ? 1 : 0; /* low or none? */

	ret = regulator_set_voltage(phy->vdd, phy->vdd_levels[min],

				    phy->vdd_levels[2]);

	if (ret) {

		dev_err(phy->phy.dev, "unable to set voltage for hsusb vdd\n");

		return ret;

	}



	dev_dbg(phy->phy.dev, "%s: min_vol:%d max_vol:%d\n", __func__,

		phy->vdd_levels[min], phy->vdd_levels[2]);



	return ret;

}



static int msm_hsphy_enable_power(struct msm_hsphy *phy, bool on)

{

	int ret = 0;



	dev_dbg(phy->phy.dev, "%s turn %s regulators. power_enabled:%d\n",

			__func__, on ? "on" : "off", phy->power_enabled);



	if (phy->power_enabled == on) {

		dev_dbg(phy->phy.dev, "PHYs' regulators are already ON.\n");

		return 0;

	}



	if (!on)

		goto disable_vdda33;



	ret = msm_hsphy_config_vdd(phy, true);

	if (ret) {

		dev_err(phy->phy.dev, "Unable to config VDD:%d\n",

							ret);

		goto err_vdd;

	}



	ret = regulator_enable(phy->vdd);

	if (ret) {

		dev_err(phy->phy.dev, "Unable to enable VDD\n");

		goto unconfig_vdd;

	}



	ret = regulator_set_load(phy->vdda18, USB_HSPHY_1P8_HPM_LOAD);

	if (ret < 0) {

		dev_err(phy->phy.dev, "Unable to set HPM of vdda18:%d\n", ret);

		goto disable_vdd;

	}



	ret = regulator_set_voltage(phy->vdda18, USB_HSPHY_1P8_VOL_MIN,

						USB_HSPHY_1P8_VOL_MAX);

	if (ret) {

		dev_err(phy->phy.dev,

				"Unable to set voltage for vdda18:%d\n", ret);

		goto put_vdda18_lpm;

	}



	ret = regulator_enable(phy->vdda18);

	if (ret) {

		dev_err(phy->phy.dev, "Unable to enable vdda18:%d\n", ret);

		goto unset_vdda18;

	}



	ret = regulator_set_load(phy->vdda33, USB_HSPHY_3P3_HPM_LOAD);

	if (ret < 0) {

		dev_err(phy->phy.dev, "Unable to set HPM of vdda33:%d\n", ret);

		goto disable_vdda18;

	}



	ret = regulator_set_voltage(phy->vdda33, USB_HSPHY_3P3_VOL_MIN,

						USB_HSPHY_3P3_VOL_MAX);

	if (ret) {

		dev_err(phy->phy.dev,

				"Unable to set voltage for vdda33:%d\n", ret);

		goto put_vdda33_lpm;

	}



	ret = regulator_enable(phy->vdda33);

	if (ret) {

		dev_err(phy->phy.dev, "Unable to enable vdda33:%d\n", ret);

		goto unset_vdd33;

	}



	phy->power_enabled = true;



	pr_debug("%s(): HSUSB PHY's regulators are turned ON.\n", __func__);

	return ret;



disable_vdda33:

	ret = regulator_disable(phy->vdda33);

	if (ret)

		dev_err(phy->phy.dev, "Unable to disable vdda33:%d\n", ret);



unset_vdd33:

	ret = regulator_set_voltage(phy->vdda33, 0, USB_HSPHY_3P3_VOL_MAX);

	if (ret)

		dev_err(phy->phy.dev,

			"Unable to set (0) voltage for vdda33:%d\n", ret);



put_vdda33_lpm:

	ret = regulator_set_load(phy->vdda33, 0);

	if (ret < 0)

		dev_err(phy->phy.dev, "Unable to set (0) HPM of vdda33\n");



disable_vdda18:

	ret = regulator_disable(phy->vdda18);

	if (ret)

		dev_err(phy->phy.dev, "Unable to disable vdda18:%d\n", ret);



unset_vdda18:

	ret = regulator_set_voltage(phy->vdda18, 0, USB_HSPHY_1P8_VOL_MAX);

	if (ret)

		dev_err(phy->phy.dev,

			"Unable to set (0) voltage for vdda18:%d\n", ret);



put_vdda18_lpm:

	ret = regulator_set_load(phy->vdda18, 0);

	if (ret < 0)

		dev_err(phy->phy.dev, "Unable to set LPM of vdda18\n");



disable_vdd:

	if (ret)

		dev_err(phy->phy.dev, "Unable to disable vdd:%d\n",

								ret);



unconfig_vdd:

	ret = msm_hsphy_config_vdd(phy, false);

	if (ret)

		dev_err(phy->phy.dev, "Unable unconfig VDD:%d\n",

								ret);

err_vdd:

	phy->power_enabled = false;

	dev_dbg(phy->phy.dev, "HSUSB PHY's regulators are turned OFF.\n");

	return ret;

}



static void msm_usb_write_readback(void __iomem *base, u32 offset,

					const u32 mask, u32 val)

{

	u32 write_val, tmp = readl_relaxed(base + offset);



	tmp &= ~mask;		/* retain other bits */

	write_val = tmp | val;



	writel_relaxed(write_val, base + offset);



	/* Read back to see if val was written */

	tmp = readl_relaxed(base + offset);

	tmp &= mask;		/* clear other bits */



	if (tmp != val)

		pr_err("%s: write: %x to QSCRATCH: %x FAILED\n",

			__func__, val, offset);

}



static void msm_hsphy_reset(struct msm_hsphy *phy)

{

	int ret;



	ret = reset_control_assert(phy->phy_reset);

	if (ret)

		dev_err(phy->phy.dev, "%s: phy_reset assert failed\n",

								__func__);

	usleep_range(100, 150);



	ret = reset_control_deassert(phy->phy_reset);

	if (ret)

		dev_err(phy->phy.dev, "%s: phy_reset deassert failed\n",

							__func__);

}



static void hsusb_phy_write_seq(void __iomem *base, u32 *seq, int cnt,

		unsigned long delay)

{

	int i;



	pr_debug("Seq count:%d\n", cnt);

	for (i = 0; i < cnt; i = i+2) {

		pr_debug("write 0x%02x to 0x%02x\n", seq[i], seq[i+1]);

		writel_relaxed(seq[i], base + seq[i+1]);

		if (delay)

			usleep_range(delay, (delay + 2000));

	}

}



static int msm_hsphy_emu_init(struct usb_phy *uphy)

{

	struct msm_hsphy *phy = container_of(uphy, struct msm_hsphy, phy);

	int ret;



	dev_dbg(uphy->dev, "%s\n", __func__);



	ret = msm_hsphy_enable_power(phy, true);

	if (ret)

		return ret;



	msm_hsphy_enable_clocks(phy, true);

	msm_hsphy_reset(phy);



	if (phy->emu_init_seq) {

		hsusb_phy_write_seq(phy->base,

			phy->emu_init_seq,

			phy->emu_init_seq_len, 10000);



		/* Wait for 5ms as per QUSB2 RUMI sequence */

		usleep_range(5000, 7000);



		if (phy->emu_dcm_reset_seq)

			hsusb_phy_write_seq(phy->emu_phy_base,

					phy->emu_dcm_reset_seq,

					phy->emu_dcm_reset_seq_len, 10000);

	}



	return 0;

}



static int msm_hsphy_init(struct usb_phy *uphy)

{

	struct msm_hsphy *phy = container_of(uphy, struct msm_hsphy, phy);

	int ret;



	dev_dbg(uphy->dev, "%s\n", __func__);



	ret = msm_hsphy_enable_power(phy, true);

	if (ret)

		return ret;



	msm_hsphy_enable_clocks(phy, true);

	msm_hsphy_reset(phy);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_CFG0,

	UTMI_PHY_CMN_CTRL_OVERRIDE_EN, UTMI_PHY_CMN_CTRL_OVERRIDE_EN);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,

				POR, POR);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,

				FSEL_MASK, 0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,

				PLLBTUNE, PLLBTUNE);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_REFCLK_CTRL,

				REFCLK_SEL_MASK, REFCLK_SEL_DEFAULT);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON1,

				VBUSVLDEXTSEL0, VBUSVLDEXTSEL0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL1,

				VBUSVLDEXT0, VBUSVLDEXT0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON2,

				VREGBYPASS, VREGBYPASS);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,

				ATERESET, ATERESET);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_TEST1,

				TESTDATAOUTSEL, TESTDATAOUTSEL);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_TEST1,

				TOGGLE_2WR, TOGGLE_2WR);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL_COMMON0,

				VATESTENB_MASK, 0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_TEST0,

				TESTDATAIN_MASK, 0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,

				USB2_SUSPEND_N_SEL, USB2_SUSPEND_N_SEL);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,

				USB2_SUSPEND_N, USB2_SUSPEND_N);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_UTMI_CTRL0,

				SLEEPM, SLEEPM);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_UTMI_CTRL5,

				POR, 0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_HS_PHY_CTRL2,

				USB2_SUSPEND_N_SEL, 0);



	msm_usb_write_readback(phy->base, USB2_PHY_USB_PHY_CFG0,

	UTMI_PHY_CMN_CTRL_OVERRIDE_EN, 0);



	return 0;

}



static int msm_hsphy_set_suspend(struct usb_phy *uphy, int suspend)

{

	return 0;

}



static int msm_hsphy_notify_connect(struct usb_phy *uphy,

				    enum usb_device_speed speed)

{

	struct msm_hsphy *phy = container_of(uphy, struct msm_hsphy, phy);



	phy->cable_connected = true;



	return 0;

}



static int msm_hsphy_notify_disconnect(struct usb_phy *uphy,

				       enum usb_device_speed speed)

{

	struct msm_hsphy *phy = container_of(uphy, struct msm_hsphy, phy);



	phy->cable_connected = false;



	return 0;

}



static int msm_hsphy_probe(struct platform_device *pdev)

{

	struct msm_hsphy *phy;

	struct device *dev = &pdev->dev;

	struct resource *res;

	int ret = 0, size = 0;





	phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);

	if (!phy) {

		ret = -ENOMEM;

		goto err_ret;

	}



	phy->phy.dev = dev;

	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,

						"hsusb_phy_base");

	if (!res) {

		dev_err(dev, "missing memory base resource\n");

		ret = -ENODEV;

		goto err_ret;

	}



	phy->base = devm_ioremap_resource(dev, res);

	if (IS_ERR(phy->base)) {

		dev_err(dev, "ioremap failed\n");

		ret = -ENODEV;

		goto err_ret;

	}



	res = platform_get_resource_byname(pdev, IORESOURCE_MEM,

							"emu_phy_base");

	if (res) {

		phy->emu_phy_base = devm_ioremap_resource(dev, res);

		if (IS_ERR(phy->emu_phy_base)) {

			dev_dbg(dev, "couldn't ioremap emu_phy_base\n");

			phy->emu_phy_base = NULL;

		}

	}



	/* ref_clk_src is needed irrespective of SE_CLK or DIFF_CLK usage */

	phy->ref_clk_src = devm_clk_get(dev, "ref_clk_src");

	if (IS_ERR(phy->ref_clk_src)) {

		dev_dbg(dev, "clk get failed for ref_clk_src\n");

		ret = PTR_ERR(phy->ref_clk_src);

		return ret;

	}



	if (of_property_match_string(pdev->dev.of_node,

				"clock-names", "cfg_ahb_clk") >= 0) {

		phy->cfg_ahb_clk = devm_clk_get(dev, "cfg_ahb_clk");

		if (IS_ERR(phy->cfg_ahb_clk)) {

			ret = PTR_ERR(phy->cfg_ahb_clk);

			if (ret != -EPROBE_DEFER)

				dev_err(dev,

				"clk get failed for cfg_ahb_clk ret %d\n", ret);

			return ret;

		}

	}



	phy->phy_reset = devm_reset_control_get(dev, "phy_reset");

	if (IS_ERR(phy->phy_reset))

		return PTR_ERR(phy->phy_reset);



	of_get_property(dev->of_node, "qcom,emu-init-seq", &size);

	if (size) {

		phy->emu_init_seq = devm_kzalloc(dev,

						size, GFP_KERNEL);

		if (phy->emu_init_seq) {

			phy->emu_init_seq_len =

				(size / sizeof(*phy->emu_init_seq));

			if (phy->emu_init_seq_len % 2) {

				dev_err(dev, "invalid emu_init_seq_len\n");

				return -EINVAL;

			}



			of_property_read_u32_array(dev->of_node,

				"qcom,emu-init-seq",

				phy->emu_init_seq,

				phy->emu_init_seq_len);

		} else {

			dev_dbg(dev,

			"error allocating memory for emu_init_seq\n");

		}

	}



	size = 0;

	of_get_property(dev->of_node, "qcom,emu-dcm-reset-seq", &size);

	if (size) {

		phy->emu_dcm_reset_seq = devm_kzalloc(dev,

						size, GFP_KERNEL);

		if (phy->emu_dcm_reset_seq) {

			phy->emu_dcm_reset_seq_len =

				(size / sizeof(*phy->emu_dcm_reset_seq));

			if (phy->emu_dcm_reset_seq_len % 2) {

				dev_err(dev, "invalid emu_dcm_reset_seq_len\n");

				return -EINVAL;

			}



			of_property_read_u32_array(dev->of_node,

				"qcom,emu-dcm-reset-seq",

				phy->emu_dcm_reset_seq,

				phy->emu_dcm_reset_seq_len);

		} else {

			dev_dbg(dev,

			"error allocating memory for emu_dcm_reset_seq\n");

		}

	}



	ret = of_property_read_u32_array(dev->of_node, "qcom,vdd-voltage-level",

					 (u32 *) phy->vdd_levels,

					 ARRAY_SIZE(phy->vdd_levels));

	if (ret) {

		dev_err(dev, "error reading qcom,vdd-voltage-level property\n");

		goto err_ret;

	}





	phy->vdd = devm_regulator_get(dev, "vdd");

	if (IS_ERR(phy->vdd)) {

		dev_err(dev, "unable to get vdd supply\n");

		ret = PTR_ERR(phy->vdd);

		goto err_ret;

	}



	phy->vdda33 = devm_regulator_get(dev, "vdda33");

	if (IS_ERR(phy->vdda33)) {

		dev_err(dev, "unable to get vdda33 supply\n");

		ret = PTR_ERR(phy->vdda33);

		goto err_ret;

	}



	phy->vdda18 = devm_regulator_get(dev, "vdda18");

	if (IS_ERR(phy->vdda18)) {

		dev_err(dev, "unable to get vdda18 supply\n");

		ret = PTR_ERR(phy->vdda18);

		goto err_ret;

	}



	platform_set_drvdata(pdev, phy);



	if (phy->emu_init_seq)

		phy->phy.init			= msm_hsphy_emu_init;

	else

		phy->phy.init			= msm_hsphy_init;

	phy->phy.set_suspend		= msm_hsphy_set_suspend;

	phy->phy.notify_connect		= msm_hsphy_notify_connect;

	phy->phy.notify_disconnect	= msm_hsphy_notify_disconnect;

	phy->phy.type			= USB_PHY_TYPE_USB2;



	ret = usb_add_phy_dev(&phy->phy);

	if (ret)

		return ret;



	return 0;



err_ret:

	return ret;

}



static int msm_hsphy_remove(struct platform_device *pdev)

{

	struct msm_hsphy *phy = platform_get_drvdata(pdev);



	if (!phy)

		return 0;



	usb_remove_phy(&phy->phy);

	clk_disable_unprepare(phy->ref_clk_src);



	msm_hsphy_enable_clocks(phy, false);

	msm_hsphy_enable_power(phy, false);



	kfree(phy);



	return 0;

}



static const struct of_device_id msm_usb_id_table[] = {

	{

		.compatible = "qcom,usb-hsphy-snps-femto",

	},

	{ },

};

MODULE_DEVICE_TABLE(of, msm_usb_id_table);



static struct platform_driver msm_hsphy_driver = {

	.probe		= msm_hsphy_probe,

	.remove		= msm_hsphy_remove,

	.driver = {

		.name	= "msm-usb-hsphy",

		.of_match_table = of_match_ptr(msm_usb_id_table),

	},

};



module_platform_driver(msm_hsphy_driver);



MODULE_DESCRIPTION("MSM USB HS PHY driver");

MODULE_LICENSE("GPL v2");

drivers/usb/phy/phy-msm-ssusb-qmp.c

0 → 100644
+1028 −0

File added.

Preview size limit exceeded, changes collapsed.