Merge branch 'tip/tracing/core4' of...

		function tracer guts

		====================

Introduction

------------

Here we will cover the architecture pieces that the common function tracing

code relies on for proper functioning.  Things are broken down into increasing

complexity so that you can start simple and at least get basic functionality.

Note that this focuses on architecture implementation details only.  If you

want more explanation of a feature in terms of common code, review the common

ftrace.txt file.

Prerequisites

-------------

Ftrace relies on these features being implemented:

 STACKTRACE_SUPPORT - implement save_stack_trace()

 TRACE_IRQFLAGS_SUPPORT - implement include/asm/irqflags.h

HAVE_FUNCTION_TRACER

--------------------

You will need to implement the mcount and the ftrace_stub functions.

The exact mcount symbol name will depend on your toolchain.  Some call it

"mcount", "_mcount", or even "__mcount".  You can probably figure it out by

running something like:

	$ echo 'main(){}' | gcc -x c -S -o - - -pg | grep mcount

	        call    mcount

We'll make the assumption below that the symbol is "mcount" just to keep things

nice and simple in the examples.

Keep in mind that the ABI that is in effect inside of the mcount function is

*highly* architecture/toolchain specific.  We cannot help you in this regard,

sorry.  Dig up some old documentation and/or find someone more familiar than

you to bang ideas off of.  Typically, register usage (argument/scratch/etc...)

is a major issue at this point, especially in relation to the location of the

mcount call (before/after function prologue).  You might also want to look at

how glibc has implemented the mcount function for your architecture.  It might

be (semi-)relevant.

The mcount function should check the function pointer ftrace_trace_function

to see if it is set to ftrace_stub.  If it is, there is nothing for you to do,

so return immediately.  If it isn't, then call that function in the same way

the mcount function normally calls __mcount_internal -- the first argument is

the "frompc" while the second argument is the "selfpc" (adjusted to remove the

size of the mcount call that is embedded in the function).

For example, if the function foo() calls bar(), when the bar() function calls

mcount(), the arguments mcount() will pass to the tracer are:

	"frompc" - the address bar() will use to return to foo()

	"selfpc" - the address bar() (with _mcount() size adjustment)

Also keep in mind that this mcount function will be called *a lot*, so

optimizing for the default case of no tracer will help the smooth running of

your system when tracing is disabled.  So the start of the mcount function is

typically the bare min with checking things before returning.  That also means

the code flow should usually kept linear (i.e. no branching in the nop case).

This is of course an optimization and not a hard requirement.

Here is some pseudo code that should help (these functions should actually be

implemented in assembly):

void ftrace_stub(void)

{

	return;

}

void mcount(void)

{

	/* save any bare state needed in order to do initial checking */

	extern void (*ftrace_trace_function)(unsigned long, unsigned long);

	if (ftrace_trace_function != ftrace_stub)

		goto do_trace;

	/* restore any bare state */

	return;

do_trace:

	/* save all state needed by the ABI (see paragraph above) */

	unsigned long frompc = ...;

	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;

	ftrace_trace_function(frompc, selfpc);

	/* restore all state needed by the ABI */

}

Don't forget to export mcount for modules !

extern void mcount(void);

EXPORT_SYMBOL(mcount);

HAVE_FUNCTION_TRACE_MCOUNT_TEST

-------------------------------

This is an optional optimization for the normal case when tracing is turned off

in the system.  If you do not enable this Kconfig option, the common ftrace

code will take care of doing the checking for you.

To support this feature, you only need to check the function_trace_stop

variable in the mcount function.  If it is non-zero, there is no tracing to be

done at all, so you can return.

This additional pseudo code would simply be:

void mcount(void)

{

	/* save any bare state needed in order to do initial checking */

+	if (function_trace_stop)

+		return;

	extern void (*ftrace_trace_function)(unsigned long, unsigned long);

	if (ftrace_trace_function != ftrace_stub)

...

HAVE_FUNCTION_GRAPH_TRACER

--------------------------

Deep breath ... time to do some real work.  Here you will need to update the

mcount function to check ftrace graph function pointers, as well as implement

some functions to save (hijack) and restore the return address.

The mcount function should check the function pointers ftrace_graph_return

(compare to ftrace_stub) and ftrace_graph_entry (compare to

ftrace_graph_entry_stub).  If either of those are not set to the relevant stub

function, call the arch-specific function ftrace_graph_caller which in turn

calls the arch-specific function prepare_ftrace_return.  Neither of these

function names are strictly required, but you should use them anyways to stay

consistent across the architecture ports -- easier to compare & contrast

things.

The arguments to prepare_ftrace_return are slightly different than what are

passed to ftrace_trace_function.  The second argument "selfpc" is the same,

but the first argument should be a pointer to the "frompc".  Typically this is

located on the stack.  This allows the function to hijack the return address

temporarily to have it point to the arch-specific function return_to_handler.

That function will simply call the common ftrace_return_to_handler function and

that will return the original return address with which, you can return to the

original call site.

Here is the updated mcount pseudo code:

void mcount(void)

{

...

	if (ftrace_trace_function != ftrace_stub)

		goto do_trace;

+#ifdef CONFIG_FUNCTION_GRAPH_TRACER

+	extern void (*ftrace_graph_return)(...);

+	extern void (*ftrace_graph_entry)(...);

+	if (ftrace_graph_return != ftrace_stub ||

+	    ftrace_graph_entry != ftrace_graph_entry_stub)

+		ftrace_graph_caller();

+#endif

	/* restore any bare state */

...

Here is the pseudo code for the new ftrace_graph_caller assembly function:

#ifdef CONFIG_FUNCTION_GRAPH_TRACER

void ftrace_graph_caller(void)

{

	/* save all state needed by the ABI */

	unsigned long *frompc = &...;

	unsigned long selfpc = <return address> - MCOUNT_INSN_SIZE;

	prepare_ftrace_return(frompc, selfpc);

	/* restore all state needed by the ABI */

}

#endif

For information on how to implement prepare_ftrace_return(), simply look at

the x86 version.  The only architecture-specific piece in it is the setup of

the fault recovery table (the asm(...) code).  The rest should be the same

across architectures.

Here is the pseudo code for the new return_to_handler assembly function.  Note

that the ABI that applies here is different from what applies to the mcount

code.  Since you are returning from a function (after the epilogue), you might

be able to skimp on things saved/restored (usually just registers used to pass

return values).

#ifdef CONFIG_FUNCTION_GRAPH_TRACER

void return_to_handler(void)

{

	/* save all state needed by the ABI (see paragraph above) */

	void (*original_return_point)(void) = ftrace_return_to_handler();

	/* restore all state needed by the ABI */

	/* this is usually either a return or a jump */

	original_return_point();

}

#endif

HAVE_FTRACE_NMI_ENTER

---------------------

If you can't trace NMI functions, then skip this option.

<details to be filled>

HAVE_FTRACE_SYSCALLS

---------------------

<details to be filled>

HAVE_FTRACE_MCOUNT_RECORD

-------------------------

See scripts/recordmcount.pl for more info.

<details to be filled>

HAVE_DYNAMIC_FTRACE

---------------------

<details to be filled>

means that the list of tracers can always grow).

Implementation Details

----------------------

See ftrace-design.txt for details for arch porters and such.

The File System

---------------

#define KPROBE_HIT_SSDONE	0x00000008

/* Attach to insert probes on any functions which should be ignored*/

#define __kprobes	__attribute__((__section__(".kprobes.text"))) notrace

#define __kprobes	__attribute__((__section__(".kprobes.text")))

#else /* CONFIG_KPROBES */

typedef int kprobe_opcode_t;

struct arch_specific_insn {

	int dummy;

};

#define __kprobes	notrace

#define __kprobes

#endif /* CONFIG_KPROBES */

struct kprobe;

#undef __print_flags

#define __print_flags(flag, delim, flag_array...)			\

	({								\

		static const struct trace_print_flags flags[] =		\

		static const struct trace_print_flags __flags[] =	\

			{ flag_array, { -1, NULL }};			\

		ftrace_print_flags_seq(p, delim, flag, flags);		\

		ftrace_print_flags_seq(p, delim, flag, __flags);	\

	})

#undef __print_symbolic

#undef TRACE_EVENT

#define TRACE_EVENT(call, proto, args, tstruct, assign, print)		\

enum print_line_t							\

static enum print_line_t						\

ftrace_raw_output_##call(struct trace_iterator *iter, int flags)	\

{									\

	struct trace_seq *s = &iter->seq;				\

#undef TRACE_EVENT

#define TRACE_EVENT(call, proto, args, tstruct, func, print)		\

int									\

static int								\

ftrace_define_fields_##call(struct ftrace_event_call *event_call)	\

{									\

	struct ftrace_raw_##call field;					\

config HAVE_FTRACE_NMI_ENTER

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_FUNCTION_TRACER

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_FUNCTION_GRAPH_TRACER

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_FUNCTION_GRAPH_FP_TEST

	bool

config HAVE_FUNCTION_TRACE_MCOUNT_TEST

	bool

	help

	 This gets selected when the arch tests the function_trace_stop

	 variable at the mcount call site. Otherwise, this variable

	 is tested by the called function.

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_DYNAMIC_FTRACE

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_FTRACE_MCOUNT_RECORD

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config HAVE_HW_BRANCH_TRACER

	bool

config HAVE_SYSCALL_TRACEPOINTS

	bool

	help

	  See Documentation/trace/ftrace-implementation.txt

config TRACER_MAX_TRACE

	bool

	  functioning properly. It will do tests on all the configured

	  tracers of ftrace.

config EVENT_TRACE_TEST_SYSCALLS

	bool "Run selftest on syscall events"

	depends on FTRACE_STARTUP_TEST

	help

	 This option will also enable testing every syscall event.

	 It only enables the event and disables it and runs various loads

	 with the event enabled. This adds a bit more time for kernel boot

	 up since it runs this on every system call defined.

	 TBD - enable a way to actually call the syscalls as we test their

	       events

config MMIOTRACE

	bool "Memory mapped IO tracing"

	depends on HAVE_MMIOTRACE_SUPPORT && PCI