Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 19b455f4 authored by Ritesh Kumar's avatar Ritesh Kumar Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add support for nt36672c cphy panel on atoll 



This change adds support for nt36672c video mode cphy panel
on atoll target.

Change-Id: If198f7a2547d87873e2f2c45f5605dd3a9b58e02
Signed-off-by: default avatarRitesh Kumar <riteshk@codeaurora.org>
parent 7aeef01a

arch/arm64/boot/dts/qcom/atoll-idp.dtsi

+11 −0
Original line number Diff line number Diff line
@@ -264,6 +264,17 @@ 
	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;

};



&dsi_nt36672c_video {

	qcom,panel-supply-entries = <&dsi_panel_pwr_supply_no_labibb>;

	qcom,mdss-dsi-bl-pmic-control-type = "bl_ctrl_dcs";

	qcom,mdss-dsi-bl-min-level = <1>;

	qcom,mdss-dsi-bl-max-level = <255>;

	qcom,platform-te-gpio = <&tlmm 10 0>;

	qcom,platform-reset-gpio = <&pm6150l_gpios 3 0>;

	qcom,platform-bklight-en-gpio = <&pm6150l_gpios 10 0>;

	qcom,platform-en-gpio = <&pm6150l_gpios 4 0>;

};



&qupv3_se0_i2c {

	status = "ok";

	qcom,clk-freq-out = <1000000>;

arch/arm64/boot/dts/qcom/atoll-sde-display.dtsi

+35 −1
Original line number Diff line number Diff line
@@ -15,6 +15,7 @@ 
#include "dsi-panel-sim-video.dtsi"

#include "dsi-panel-sim-cmd.dtsi"

#include "dsi-panel-sim-dsc375-cmd.dtsi"

#include "dsi-panel-nt36672c-fhd-plus-video.dtsi"

#include <dt-bindings/clock/mdss-10nm-pll-clk.h>



&soc {
@@ -143,6 +144,18 @@ 
		qcom,dsi-panel = <&dsi_sim_dsc_375_cmd>;

	};



	dsi_nt36672c_video_display: qcom,dsi-display@5 {

		label = "dsi_nt36672c_video_display";

		qcom,display-type = "primary";



		qcom,dsi-ctrl-num = <0>;

		qcom,dsi-phy-num = <0>;



		qcom,dsi-select-clocks = "mux_byte_clk0", "mux_pixel_clk0",

					"cphy_byte_clk0", "cphy_pixel_clk0";

		qcom,dsi-panel = <&dsi_nt36672c_video>;

	};



	sde_dsi: qcom,dsi-display {

		compatible = "qcom,dsi-display";
@@ -180,7 +193,8 @@ 
			&dsi_rm69299_visionox_amoled_cmd_display

			&dsi_sim_vid_display

			&dsi_sim_cmd_display

			&dsi_sim_dsc_375_cmd_display>;

			&dsi_sim_dsc_375_cmd_display

			&dsi_nt36672c_video_display>;

	};



	sde_wb: qcom,wb-display@0 {
@@ -335,3 +349,23 @@ 
		};

	};

};



&dsi_nt36672c_video {

	qcom,mdss-dsi-t-clk-post = <0x00>;

	qcom,mdss-dsi-t-clk-pre = <0x00>;

	qcom,esd-check-enabled;

	qcom,mdss-dsi-panel-status-check-mode = "reg_read";

	qcom,mdss-dsi-panel-status-command = [06 01 00 01 00 00 01 0a];

	qcom,mdss-dsi-panel-status-command-state = "dsi_hs_mode";

	qcom,mdss-dsi-panel-status-value = <0x9c>;

	qcom,mdss-dsi-panel-on-check-value = <0x9c>;

	qcom,mdss-dsi-panel-status-read-length = <1>;

	qcom,mdss-dsi-display-timings {

		timing@0{

			qcom,mdss-dsi-panel-phy-timings = [00 16 06 05 20 1F 06

				06 06 03 02 04];

			qcom,display-topology = <1 0 1>;

			qcom,default-topology-index = <0>;

		};

	};

};

arch/arm64/boot/dts/qcom/dsi-panel-nt36672c-fhd-plus-video.dtsi

0 → 100644
+76 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2019, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&mdss_mdp {

	dsi_nt36672c_video: qcom,mdss_dsi_nt36672c_video {

		qcom,mdss-dsi-panel-name =

			"nt36672c fhd plus video mode dsi panel";

		qcom,mdss-dsi-panel-type = "dsi_video_mode";

		qcom,mdss-dsi-virtual-channel-id = <0>;

		qcom,mdss-dsi-stream = <0>;

		qcom,mdss-dsi-bpp = <24>;

		qcom,mdss-dsi-underflow-color = <0xff>;

		qcom,mdss-dsi-border-color = <0>;

		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";

		qcom,mdss-dsi-bllp-eof-power-mode;

		qcom,mdss-dsi-bllp-power-mode;

		qcom,mdss-dsi-lane-0-state;

		qcom,mdss-dsi-lane-1-state;

		qcom,mdss-dsi-lane-2-state;

		qcom,mdss-dsi-dma-trigger = "trigger_sw";

		qcom,mdss-dsi-mdp-trigger = "none";

		qcom,mdss-dsi-reset-sequence = <1 20>, <0 20>, <1 20>;

		qcom,mdss-pan-physical-width-dimension = <74>;

		qcom,mdss-pan-physical-height-dimension = <131>;



		qcom,mdss-dsi-panel-peak-brightness = <4200000>;

		qcom,mdss-dsi-panel-blackness-level = <3230>;

		qcom,panel-cphy-mode;



		qcom,mdss-dsi-display-timings {

			timing@0{

				qcom,mdss-dsi-panel-width = <1080>;

				qcom,mdss-dsi-panel-height = <2400>;

				qcom,mdss-dsi-h-front-porch = <76>;

				qcom,mdss-dsi-h-back-porch = <56>;

				qcom,mdss-dsi-h-pulse-width = <12>;

				qcom,mdss-dsi-h-sync-skew = <0>;

				qcom,mdss-dsi-v-back-porch = <10>;

				qcom,mdss-dsi-v-front-porch = <10>;

				qcom,mdss-dsi-v-pulse-width = <54>;

				qcom,mdss-dsi-panel-framerate = <60>;

				qcom,mdss-dsi-on-command = [

					29 01 00 00 00 00 02 FF 10

					29 01 00 00 00 00 02 FB 01

					29 01 00 00 00 00 02 B0 00

					29 01 00 00 00 00 02 C0 00

					29 01 00 00 00 00 03 C2 1B A0



					29 01 00 00 00 00 02 FF 25

					29 01 00 00 00 00 02 FB 01

					29 01 00 00 00 00 02 18 21



					29 01 00 00 00 00 02 FF 10

					29 01 00 00 00 00 02 35 00

					05 01 00 00 78 00 02 11 00

					05 01 00 00 14 00 02 29 00

				];

				qcom,mdss-dsi-off-command =[

					05 01 00 00 14 00 02 28 00

					05 01 00 00 78 00 02 10 00

				];

				qcom,mdss-dsi-on-command-state = "dsi_lp_mode";

				qcom,mdss-dsi-off-command-state = "dsi_hs_mode";

			};

		};

	};

};