Merge "ARM: dts: msm: Add support for MSM8996v3/pro ADP Lite platform" (fe4e5fae) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/Makefile

+2 −0

Original line number	Diff line number	Diff line
		@@ -28,7 +28,9 @@ dtb-$(CONFIG_ARCH_MSM8996) += msm8996-v2-pmi8994-cdp.dtb \
		msm8996-v3-dtp.dtb \
		msm8996-v3-pm8004-mmxf-adp.dtb \
		msm8996-v3-pm8004-agave-adp.dtb \
		msm8996-v3-pm8004-agave-adp-lite.dtb \
		msm8996pro-auto-adp.dtb \
		msm8996pro-auto-adp-lite.dtb \
		msm8996pro-auto-cdp.dtb \
		msm8996pro-pmi8994-cdp.dtb \
		msm8996pro-pmi8994-mtp.dtb \

arch/arm/boot/dts/qcom/msm8996-v3-pm8004-agave-adp-lite.dts

0 → 100644

+27 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		/dts-v1/;

		#include "msm8996-v3.dtsi"
		#include "msm8996-pm8994-pm8004.dtsi"
		#include "msm8996-agave-adp.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. MSM 8996 v3 + PM8004 ADP LITE";
		compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp";
		qcom,board-id = <0x03010019 0>;
		};

		&spi_9 {
		status = "disabled";
		};

arch/arm/boot/dts/qcom/msm8996pro-auto-adp-lite.dts

0 → 100644

+86 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		/dts-v1/;

		#include <dt-bindings/gpio/gpio.h>
		#include "msm8996pro.dtsi"
		#include "msm8996-pm8994.dtsi"
		#include "msm8996-agave-adp.dtsi"
		#include "msm8996pro-auto.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. MSM 8996pro AUTO ADP LITE";
		compatible = "qcom,msm8996-adp", "qcom,msm8996", "qcom,adp";
		qcom,msm-id = <315 0x10000>;
		qcom,board-id = <0x03010019 0>;
		};

		&spi_9 {
		status = "disabled";
		};

		&soc {
		qcom,msm-ssc-sensors {
		status = "disabled";
		};

		qcom,msm-thermal {
		qcom,hotplug-temp = <115>;
		qcom,hotplug-temp-hysteresis = <25>;
		qcom,therm-reset-temp = <119>;
		};

		i2c@75b6000 { /* BLSP8 */
		/* ADV7533 HDMI Bridge Chip removed on ADP Lite */
		adv7533@3d {
		status = "disabled";
		};
		adv7533@39 {
		status = "disabled";
		};
		};
		};

		&pil_modem {
		pinctrl-names = "default";
		pinctrl-0 = <&modem_mux>;
		};

		&slim_msm {
		status = "disabled";
		};

		&pm8994_mpps {
		mpp@a500 { /* MPP 6 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};
		};

		&sdhc_2 {
		cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>;
		pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on_sbc>;
		pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off
		&sdc2_cd_on_sbc>;
		};

		&i2c_7 {
		silabs4705@11 { /* SiLabs FM chip, slave id 0x11*/
		status = "disabled";
		};
		};