Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit fc177226 authored by Florian Vaussard's avatar Florian Vaussard Committed by Tony Lindgren
Browse files

ARM: dts: omap3-overo: Add missing pinctrl 



Add missing pinctrl entries for:
- i2c1
- mmc1

Signed-off-by: default avatarFlorian Vaussard <florian.vaussard@epfl.ch>
Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
parent bbde8f24

arch/arm/boot/dts/omap3-overo-base.dtsi

+31 −9
Original line number Diff line number Diff line
@@ -31,7 +31,36 @@ 
	};

};



&omap3_pmx_core {

	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0)	/* uart3_rx_irrx.uart3_rx_irrx */

			OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0)		/* uart3_tx_irtx.uart3_tx_irtx */

		>;

	};



	i2c1_pins: pinmux_i2c1_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0)		/* i2c1_scl.i2c1_scl */

			OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT | MUX_MODE0)		/* i2c1_sda.i2c1_sda */

		>;

	};



	mmc1_pins: pinmux_mmc1_pins {

		pinctrl-single,pins = <

			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_clk.sdmmc1_clk */

			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_cmd.sdmmc1_cmd */

			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat0.sdmmc1_dat0 */

			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat1.sdmmc1_dat1 */

			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat2.sdmmc1_dat2 */

			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)		/* sdmmc1_dat3.sdmmc1_dat3 */

		>;

	};

};



&i2c1 {

	pinctrl-names = "default";

	pinctrl-0 = <&i2c1_pins>;

	clock-frequency = <2600000>;



	twl: twl@48 {
@@ -57,6 +86,8 @@ 


/* on board microSD slot */

&mmc1 {

	pinctrl-names = "default";

	pinctrl-0 = <&mmc1_pins>;

	vmmc-supply = <&vmmc1>;

	bus-width = <4>;

};
@@ -79,15 +110,6 @@ 
	power = <50>;

};



&omap3_pmx_core {

	uart3_pins: pinmux_uart3_pins {

		pinctrl-single,pins = <

			0x16e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */

			0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */

		>;

	};

};



&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_pins>;