Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit faa79f10 authored by Petar Upinov's avatar Petar Upinov Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add front,aux cams apq8053 support 



Add support to connect front and/or aux sensors in camera to apq8053

Change-Id: I98daafad2efc771d61e88c2913aa2204edb33cb9
Signed-off-by: default avatarPetar Upinov <petaru@codeaurora.org>
parent 6bee3417

arch/arm/boot/dts/qcom/apq8053-camera-sensor-mtp.dtsi

+81 −0
Original line number Diff line number Diff line
@@ -99,4 +99,85 @@ 
		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		cam_vaf-supply = <&pm8953_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana",

							"cam_vaf";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000 2850000>;

		qcom,cam-vreg-op-mode = <200000 0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk2_sleep

				&cam_sensor_front_sleep>;

		gpios = <&tlmm 28 0>,

			<&tlmm 131 0>,

			<&tlmm 132 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

			"CAM_RESET1",

			"CAM_STANDBY1";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "disabled";

		clocks = <&clock_gcc clk_mclk2_clk_src>,

				<&clock_gcc clk_gcc_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <270>;

		cam_vdig-supply = <&pm8953_l23>;

		cam_vana-supply = <&pm8953_l22>;

		cam_vio-supply = <&pm8953_l6>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1200000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front1_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep

				&cam_sensor_front1_sleep>;

		gpios = <&tlmm 27 0>,

			<&tlmm 129 0>,

			<&tlmm 130 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <1>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};