[SCSI] mpt3sas: add new driver supporting 12GB SAS

source "drivers/scsi/megaraid/Kconfig.megaraid"

source "drivers/scsi/mpt2sas/Kconfig"

source "drivers/scsi/mpt3sas/Kconfig"

source "drivers/scsi/ufs/Kconfig"

config SCSI_HPTIOP

obj-$(CONFIG_MEGARAID_NEWGEN)	+= megaraid/

obj-$(CONFIG_MEGARAID_SAS)	+= megaraid/

obj-$(CONFIG_SCSI_MPT2SAS)	+= mpt2sas/

obj-$(CONFIG_SCSI_MPT3SAS)	+= mpt3sas/

obj-$(CONFIG_SCSI_UFSHCD)	+= ufs/

obj-$(CONFIG_SCSI_ACARD)	+= atp870u.o

obj-$(CONFIG_SCSI_SUNESP)	+= esp_scsi.o	sun_esp.o

#

# Kernel configuration file for the MPT3SAS

#

# This code is based on drivers/scsi/mpt3sas/Kconfig

# Copyright (C) 2012  LSI Corporation

#  (mailto:DL-MPTFusionLinux@lsi.com)

# This program is free software; you can redistribute it and/or

# modify it under the terms of the GNU General Public License

# as published by the Free Software Foundation; either version 2

# of the License, or (at your option) any later version.

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

# GNU General Public License for more details.

# NO WARRANTY

# THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR

# CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT

# LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,

# MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is

# solely responsible for determining the appropriateness of using and

# distributing the Program and assumes all risks associated with its

# exercise of rights under this Agreement, including but not limited to

# the risks and costs of program errors, damage to or loss of data,

# programs or equipment, and unavailability or interruption of operations.

# DISCLAIMER OF LIABILITY

# NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY

# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL

# DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND

# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR

# TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE

# USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED

# HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES

# You should have received a copy of the GNU General Public License

# along with this program; if not, write to the Free Software

# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,

# USA.

config SCSI_MPT3SAS

	tristate "LSI MPT Fusion SAS 3.0 Device Driver"

	depends on PCI && SCSI

	select SCSI_SAS_ATTRS

	select RAID_ATTRS

	---help---

	This driver supports PCI-Express SAS 12Gb/s Host Adapters.

config SCSI_MPT3SAS_MAX_SGE

	int "LSI MPT Fusion Max number of SG Entries (16 - 256)"

	depends on PCI && SCSI && SCSI_MPT3SAS

	default "128"

	range 16 256

	---help---

	This option allows you to specify the maximum number of scatter-

	gather entries per I/O. The driver default is 128, which matches

	MAX_PHYS_SEGMENTS in most kernels.  However in SuSE kernels this

	can be 256. However, it may decreased down to 16.  Decreasing this

	parameter will reduce memory requirements on a per controller instance.

config SCSI_MPT3SAS_LOGGING

	bool "LSI MPT Fusion logging facility"

	depends on PCI && SCSI && SCSI_MPT3SAS

	---help---

	This turns on a logging facility.

# mpt3sas makefile

obj-m += mpt3sas.o

mpt3sas-y +=  mpt3sas_base.o     \

		mpt3sas_config.o \

		mpt3sas_scsih.o      \

		mpt3sas_transport.o     \

		mpt3sas_ctl.o	\

		mpt3sas_trigger_diag.o