Merge "ARM: dts: Add sdhc nodes for QRD DTP8937" (f14a47db) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/msm-pmi8937.dtsi

+6 −0

Original line number	Diff line number	Diff line
		@@ -341,6 +341,12 @@
		"data-rcvry-sug";
		};
		};

		qcom,leds@a100 {
		compatible = "qcom,leds-qpnp";
		reg = <0xa100 0x100>;
		label = "mpp";
		};
		};

		qcom,pmi8937@3 {

arch/arm/boot/dts/qcom/msm8937-pmi8937-qrd-sku2.dtsi

+72 −0

Original line number	Diff line number	Diff line
		@@ -13,3 +13,75 @@

		#include "msm-pmi8937.dtsi"
		#include "msm8937-qrd.dtsi"

		&spmi_bus {
		qcom,pmi8937@2 {
		qcom,leds@a100 {
		status = "okay";
		qcom,led_mpp_2 {
		label = "mpp";
		linux,name = "green";
		linux,default-trigger = "none";
		qcom,default-state = "off";
		qcom,max-current = <40>;
		qcom,current-setting = <5>;
		qcom,id = <6>;
		qcom,mode = "manual";
		qcom,source-sel = <1>;
		qcom,mode-ctrl = <0x60>;
		};
		};
		};
		};

		&soc {
		i2c@78b7000 {
		status = "ok";
		focaltech@38 {
		compatible = "focaltech,5x06";
		reg = <0x38>;
		interrupt-parent = <&tlmm>;
		interrupts = <65 0x2>;
		vdd-supply = <&pm8937_l10>;
		vcc_i2c-supply = <&pm8937_l5>;
		/* pins used by touchscreen */
		pinctrl-names = "pmx_ts_active",
		"pmx_ts_suspend",
		"pmx_ts_release";
		pinctrl-0 = <&ts_int_active &ts_reset_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&ts_release>;
		focaltech,name = "ft5436";
		focaltech,family-id = <0x06>;
		focaltech,reset-gpio = <&tlmm 64 0x0>;
		focaltech,irq-gpio = <&tlmm 65 0x2008>;
		focaltech,display-coords = <0 0 720 1280>;
		focaltech,panel-coords = <0 0 720 1400>;
		focaltech,button-map= <139 102 158>;
		focaltech,no-force-update;
		focaltech,i2c-pull-up;
		focaltech,group-id = <1>;
		focaltech,hard-reset-delay-ms = <20>;
		focaltech,soft-reset-delay-ms = <200>;
		focaltech,num-max-touches = <5>;
		focaltech,fw-delay-aa-ms = <30>;
		focaltech,fw-delay-55-ms = <30>;
		focaltech,fw-upgrade-id1 = <0x79>;
		focaltech,fw-upgrade-id2 = <0x08>;
		focaltech,fw-delay-readid-ms = <10>;
		focaltech,fw-delay-era-flsh-ms = <2000>;
		focaltech,fw-auto-cal;
		focaltech,ignore-id-check;
		};
		};

		gen-vkeys {
		compatible = "qcom,gen-vkeys";
		label = "ft5x06";
		qcom,disp-maxx = <720>;
		qcom,disp-maxy = <1280>;
		qcom,panel-maxx = <720>;
		qcom,panel-maxy = <1400>;
		qcom,key-codes = <158 139 172>;
		};
		};

arch/arm/boot/dts/qcom/msm8937-pmi8950-qrd-sku1.dtsi

+45 −0

Original line number	Diff line number	Diff line
		@@ -13,3 +13,48 @@

		#include "msm-pmi8950.dtsi"
		#include "msm8937-qrd.dtsi"

		&spmi_bus {
		qcom,pmi8950@2 {
		qcom,leds@a100 {
		status = "okay";
		qcom,led_mpp_2 {
		label = "mpp";
		linux,name = "green";
		linux,default-trigger = "none";
		qcom,default-state = "off";
		qcom,max-current = <40>;
		qcom,current-setting = <5>;
		qcom,id = <6>;
		qcom,mode = "manual";
		qcom,source-sel = <1>;
		qcom,mode-ctrl = <0x60>;
		};
		};
		};
		};

		&soc {
		i2c@78b7000 {
		status = "ok";
		synaptics@20 {
		compatible = "synaptics,dsx";
		reg = <0x4b>;
		interrupt-parent = <&tlmm>;
		interrupts = <65 0x2008>;
		vdd-supply = <&pm8937_l5>;
		avdd-supply = <&pm8937_l10>;
		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",
		"pmx_ts_release";
		pinctrl-0 = <&ts_int_active &ts_reset_active>;
		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;
		pinctrl-2 = <&ts_release>;
		synaptics,display-coords = <0 0 1079 1919>;
		synaptics,panel-coords = <0 0 1079 1919>;
		synaptics,reset-gpio = <&tlmm 64 0x00>;
		synaptics,irq-gpio = <&tlmm 65 0x2008>;
		synaptics,disable-gpios;
		synaptics,button-map = <139 172 158>;
		};
		};
		};

arch/arm/boot/dts/qcom/msm8937-qrd.dtsi

+72 −0

Original line number	Diff line number	Diff line
		@@ -14,6 +14,21 @@
		#include "msm8937-pinctrl.dtsi"

		&soc {
		gpio_keys {
		compatible = "gpio-keys";
		input-name = "gpio-keys";
		pinctrl-names = "tlmm_gpio_key_active","tlmm_gpio_key_suspend";
		pinctrl-0 = <&gpio_key_active>;
		pinctrl-1 = <&gpio_key_suspend>;

		vol_up {
		label = "volume_up";
		gpios = <&tlmm 91 0x1>;
		linux,input-type = <1>;
		linux,code = <115>;
		debounce-interval = <15>;
		};
		};
		};

		&blsp1_uart2 {
		@@ -22,3 +37,60 @@
		pinctrl-0 = <&uart_console_active>;
		};

		&sdhc_1 {
		/* device core power supply */
		vdd-supply = <&pm8937_l8>;
		qcom,vdd-voltage-level = <2900000 2900000>;
		qcom,vdd-current-level = <200 570000>;

		/* device communication power supply */
		vdd-io-supply = <&pm8937_l5>;
		qcom,vdd-io-always-on;
		qcom,vdd-io-lpm-sup;
		qcom,vdd-io-voltage-level = <1800000 1800000>;
		qcom,vdd-io-current-level = <200 325000>;

		pinctrl-names = "active", "sleep";
		pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_rclk_on>;
		pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_rclk_off>;

		qcom,clk-rates = <400000 20000000 25000000 50000000 192000000
		384000000>;
		qcom,nonremovable;
		qcom,bus-speed-mode = "HS400_1p8v", "HS200_1p8v", "DDR_1p8v";

		status = "ok";
		};

		&sdhc_2 {
		/* device core power supply */
		vdd-supply = <&pm8937_l11>;
		qcom,vdd-voltage-level = <2950000 2950000>;
		qcom,vdd-current-level = <15000 800000>;

		/* device communication power supply */
		vdd-io-supply = <&pm8937_l12>;
		qcom,vdd-io-voltage-level = <2950000 2950000>;
		qcom,vdd-io-current-level = <200 22000>;

		pinctrl-names = "active", "sleep";
		pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
		pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;

		#address-cells = <0>;
		interrupt-parent = <&sdhc_2>;
		interrupts = <0 1 2>;
		#interrupt-cells = <1>;
		interrupt-map-mask = <0xffffffff>;
		interrupt-map = <0 &intc 0 125 0
		1 &intc 0 221 0
		2 &tlmm 67 0>;
		interrupt-names = "hc_irq", "pwr_irq", "status_irq";
		cd-gpios = <&tlmm 67 0x1>;

		qcom,clk-rates = <400000 20000000 25000000 50000000 100000000
		200000000>;
		qcom,bus-speed-mode = "SDR12", "SDR25", "SDR50", "DDR50", "SDR104";

		status = "ok";
		};