Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit eee44da0 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Felipe Balbi
Browse files

usb: musb: omap2430: replace *_* with *-* in property names 



No functional change. Replace *_* with *-* in property names of otg to
follow the general convention.

Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent c3ec830d

Documentation/devicetree/bindings/usb/omap-usb.txt

+6 −6
Original line number Diff line number Diff line
@@ -8,10 +8,10 @@ OMAP MUSB GLUE 
   and disconnect.

 - multipoint : Should be "1" indicating the musb controller supports

   multipoint. This is a MUSB configuration-specific setting.

 - num_eps : Specifies the number of endpoints. This is also a

 - num-eps : Specifies the number of endpoints. This is also a

   MUSB configuration-specific setting. Should be set to "16"

 - ram_bits : Specifies the ram address size. Should be set to "12"

 - interface_type : This is a board specific setting to describe the type of

 - ram-bits : Specifies the ram address size. Should be set to "12"

 - interface-type : This is a board specific setting to describe the type of

   interface between the controller and the phy. It should be "0" or "1"

   specifying ULPI and UTMI respectively.

 - mode : Should be "3" to represent OTG. "1" signifies HOST and "2"
@@ -29,14 +29,14 @@ usb_otg_hs: usb_otg_hs@4a0ab000 { 
	ti,hwmods = "usb_otg_hs";

	ti,has-mailbox;

	multipoint = <1>;

	num_eps = <16>;

	ram_bits = <12>;

	num-eps = <16>;

	ram-bits = <12>;

	ctrl-module = <&omap_control_usb>;

};



Board specific device node entry

&usb_otg_hs {

	interface_type = <1>;

	interface-type = <1>;

	mode = <3>;

	power = <50>;

};

drivers/usb/musb/omap2430.c

+3 −3
Original line number Diff line number Diff line
@@ -526,10 +526,10 @@ static int omap2430_probe(struct platform_device *pdev) 
		}



		of_property_read_u32(np, "mode", (u32 *)&pdata->mode);

		of_property_read_u32(np, "interface_type",

		of_property_read_u32(np, "interface-type",

						(u32 *)&data->interface_type);

		of_property_read_u32(np, "num_eps", (u32 *)&config->num_eps);

		of_property_read_u32(np, "ram_bits", (u32 *)&config->ram_bits);

		of_property_read_u32(np, "num-eps", (u32 *)&config->num_eps);

		of_property_read_u32(np, "ram-bits", (u32 *)&config->ram_bits);

		of_property_read_u32(np, "power", (u32 *)&pdata->power);

		config->multipoint = of_property_read_bool(np, "multipoint");

		pdata->has_mailbox = of_property_read_bool(np,