Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ee824eaa authored by Jeevan Shriram's avatar Jeevan Shriram
Browse files

ARM: dts: msm: Add support for v1.1 hardware for mdmcalifornium 



Add new dtsi files for supporting mdmcalifornium v1.1

CRs-Fixed: 1011081
Change-Id: I242451bfc656636bca7950df19983d19aead79ac
Signed-off-by: default avatarJeevan Shriram <jshriram@codeaurora.org>
parent b0af7638

arch/arm/boot/dts/qcom/Makefile

+6 −1
Original line number Diff line number Diff line
@@ -115,7 +115,12 @@ dtb-$(CONFIG_ARCH_MDMCALIFORNIUM) += mdmcalifornium-sim.dtb \ 
	mdmcalifornium-nand-cdp.dtb \

	mdmcalifornium-emmc-mtp.dtb \

	mdmcalifornium-nand-mtp.dtb \

	mdmcalifornium-nand-dualwifi-mtp.dtb

	mdmcalifornium-nand-dualwifi-mtp.dtb \

	mdmcalifornium-v1.1-emmc-cdp.dtb \

	mdmcalifornium-v1.1-nand-cdp.dtb \

	mdmcalifornium-v1.1-emmc-mtp.dtb \

	mdmcalifornium-v1.1-nand-mtp.dtb \

	mdmcalifornium-v1.1-nand-dualwifi-mtp.dtb



dtb-$(CONFIG_ARCH_MSM8937) += msm8937-rumi.dtb \

	msm8937-pmi8950-cdp.dtb \

arch/arm/boot/dts/qcom/mdmcalifornium-v1.1-cdp.dtsi

0 → 100644
+131 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "mdmcalifornium-v1.1.dtsi"

#include "mdmcalifornium-pinctrl.dtsi"

#include "mdmcalifornium-display.dtsi"

#include "qpic-panel-ili-hvga.dtsi"



&blsp1_uart3 {

	status = "ok";

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_console_active>;

};



&blsp1_uart2_hs {

	status = "ok";

};



&i2c_3 {

	status = "ok";

	smb1351_otg_supply: smb1351-charger@55 {

		compatible = "qcom,smb1351-charger";

		reg = <0x55>;

		interrupt-parent = <&tlmm_pinmux>;

		interrupts = <83 0>;

		qcom,float-voltage-mv = <4200>;

		qcom,charging-timeout = <1536>;

		qcom,recharge-thresh-mv = <200>;

		qcom,iterm-ma = <100>;

		regulator-name = "smb1351_otg_supply";

		qcom,charging-disabled;

		qcom,id-line-not-connected;

	};

};



&pmdcalifornium_gpios {

	gpio@c100 { /* GPIO 2 - VADC */

		/* GPIO should be left off, and in the high

		 * impedance state when the pin is used with the VADC

		 */

		status = "ok";

		qcom,master-en = <0>;	/* DISABLE GPIO */

	};



	gpio@c400 { /* GPIO 5 - USB_ID */

		status = "ok";

		qcom,mode = <0>;	/* Digital input */

		qcom,pull = <1>;	/* Pull up 1.5 uA */

		qcom,vin-sel = <1>;	/* 1.8 V */

		qcom,master-en = <1>;   /* Enable GPIO */

	};



	gpio@c500 { /* GPIO 6 - Rome 3.3V control */

		status = "ok";

		qcom,mode = <1>;		/* Digital output*/

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <1>;		/* Output high */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c700 { /* GPIO 8 - BT_EN */

		status = "ok";

		qcom,mode = <1>;         /* Digital output*/

		qcom,pull = <4>;         /* Pulldown 10uA */

		qcom,vin-sel = <0>;      /* VPH_PWR */

		qcom,src-sel = <0>;      /* GPIO */

		qcom,invert = <0>;       /* Invert */

		qcom,master-en = <1>;    /* Enable GPIO */

	};

};



&usb3 {

	vbus_dwc3-supply = <&smb1351_otg_supply>;

};



&pmdcalifornium_vadc {

	chan@83 {

		label = "vph_pwr";

		reg = <0x83>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <1>;

		qcom,calibration-type = "absolute";

		qcom,scale-function = <0>;

		qcom,hw-settle-time = <0>;

		qcom,fast-avg-setup = <0>;

	};



	chan@4c {

		label = "xo_therm_buf";

		reg = <0x4c>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <4>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};



	chan@53 {

		label = "ambient_therm";

		reg = <0x53>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};

};



/* Display */

&mdss_qpic {

	pinctrl-names= "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_cs_active &mdss_te_active &mdss_rs_active

		&mdss_ad_active &mdss_bl_active>;

	pinctrl-1 = <&mdss_cs_sleep &mdss_te_sleep

		&mdss_rs_sleep &mdss_ad_sleep &mdss_bl_sleep>;

	status = "ok";

};

arch/arm/boot/dts/qcom/mdmcalifornium-v1.1-emmc-cdp.dts

0 → 100644
+46 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;



#include "mdmcalifornium-v1.1-cdp.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MDM CALIFORNIUM v1.1 CDP (eMMC)";

	compatible = "qcom,mdmcalifornium-cdp", "qcom,mdmcalifornium",

		     "qcom,cdp";

	qcom,board-id = <1 0x00030000>;



	qcom,rmtfs_sharedmem@0 {

		compatible = "qcom,sharedmem-uio";

		reg = <0x0 0x00100000>;

		reg-names = "rmtfs";

		qcom,client-id = <0x00000001>;

	};

};



&sdhc_1 {

	vdd-io-supply = <&pmdcalifornium_l6>;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <100 200000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;

	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;



	qcom,bus-width = <8>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;

	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";

	qcom,nonremovable;



	status = "ok";

};

arch/arm/boot/dts/qcom/mdmcalifornium-v1.1-emmc-mtp.dts

0 → 100644
+46 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;



#include "mdmcalifornium-v1.1-mtp.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MDM CALIFORNIUM v1.1 MTP (eMMC)";

	compatible = "qcom,mdmcalifornium-mtp", "qcom,mdmcalifornium",

		     "qcom,mtp";

	qcom,board-id = <8 0x00030000>;



	qcom,rmtfs_sharedmem@0 {

		compatible = "qcom,sharedmem-uio";

		reg = <0x0 0x00100000>;

		reg-names = "rmtfs";

		qcom,client-id = <0x00000001>;

	};

};



&sdhc_1 {

	vdd-io-supply = <&pmdcalifornium_l6>;

	qcom,vdd-io-voltage-level = <1800000 1800000>;

	qcom,vdd-io-current-level = <100 200000>;



	pinctrl-names = "active", "sleep";

	pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;

	pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;



	qcom,bus-width = <8>;

	qcom,clk-rates = <400000 20000000 25000000 50000000 100000000>;

	qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v";

	qcom,nonremovable;



	status = "ok";

};

arch/arm/boot/dts/qcom/mdmcalifornium-v1.1-mtp.dtsi

0 → 100644
+143 −0
Original line number Diff line number Diff line 
/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "mdmcalifornium-v1.1.dtsi"

#include "mdmcalifornium-pinctrl.dtsi"



&blsp1_uart3 {

	status = "ok";

	pinctrl-names = "default";

	pinctrl-0 = <&uart3_console_active>;

};



&blsp1_uart2_hs {

	status = "ok";

};



&i2c_3 {

	status = "ok";

	smb1351_otg_supply: smb1351-charger@55 {

		compatible = "qcom,smb1351-charger";

		reg = <0x55>;

		interrupt-parent = <&tlmm_pinmux>;

		interrupts = <83 0>;

		qcom,float-voltage-mv = <4200>;

		qcom,charging-timeout = <1536>;

		qcom,recharge-thresh-mv = <200>;

		qcom,iterm-ma = <100>;

		regulator-name = "smb1351_otg_supply";

		pinctrl-names = "default";

		pinctrl-0 = <&smb_stat_active>;

		qcom,id-line-not-connected;

	};

};



&pmdcalifornium_gpios {

	gpio@c100 { /* GPIO 2 - VADC */

		/* GPIO should be left off, and in the high

		 * impedance state when the pin is used with the VADC

		 */

		status = "ok";

		qcom,master-en = <0>;	/* DISABLE GPIO */

	};



	gpio@c200 { /* GPIO 3 - LED */

		status = "ok";

		qcom,master-en = <0>;    /* Disable GPIO */

	};



	gpio@c400 { /* GPIO 5 - USB_ID */

		status = "ok";

		qcom,mode = <0>;	/* Digital input */

		qcom,pull = <1>;	/* Pull up 1.5 uA */

		qcom,vin-sel = <1>;	/* 1.8 V */

		qcom,master-en = <1>;   /* Enable GPIO */

	};



	gpio@c500 { /* GPIO 6 - Rome 3.3V control */

		status = "ok";

		qcom,mode = <1>;		/* Digital output*/

		qcom,output-type = <0>;		/* CMOS logic */

		qcom,invert = <1>;		/* Output high */

		qcom,vin-sel = <0>;		/* VPH_PWR */

		qcom,src-sel = <0>;		/* Constant */

		qcom,out-strength = <1>;	/* High drive strength */

		qcom,master-en = <1>;		/* Enable GPIO */

	};



	gpio@c700 { /* GPIO 8 - BT_EN */

		status = "ok";

		qcom,mode = <1>;         /* Digital output*/

		qcom,pull = <4>;         /* Pulldown 10uA */

		qcom,vin-sel = <0>;      /* VPH_PWR */

		qcom,src-sel = <0>;      /* GPIO */

		qcom,invert = <0>;       /* Invert */

		qcom,master-en = <1>;    /* Enable GPIO */

	};

};



&pmdcalifornium_misc {

	qcom,pwm-sel = <2>;		/* PWM2 */

	qcom,enable-gp-driver;		/* Enable GP */

};



&pmdcalifornium_pwm_1 {

	status = "ok";

};



&pmdcalifornium_pwm_2 {

	status = "ok";

};



&qnand_1 {

	status = "ok";

};



&usb3 {

	vbus_dwc3-supply = <&smb1351_otg_supply>;

	cpe-gpio = <&tlmm_pinmux 87 0>;

};



&pmdcalifornium_vadc {

	chan@83 {

		label = "vph_pwr";

		reg = <0x83>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <1>;

		qcom,calibration-type = "absolute";

		qcom,scale-function = <0>;

		qcom,hw-settle-time = <0>;

		qcom,fast-avg-setup = <0>;

	};



	chan@4c {

		label = "xo_therm_buf";

		reg = <0x4c>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <4>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};



	chan@53 {

		label = "ambient_therm";

		reg = <0x53>;

		qcom,decimation = <0>;

		qcom,pre-div-channel-scaling = <0>;

		qcom,calibration-type = "ratiometric";

		qcom,scale-function = <2>;

		qcom,hw-settle-time = <2>;

		qcom,fast-avg-setup = <0>;

	};

};