[Blackfin] arch: Functional power management support: Add support for cpu frequency scaling (e6c91b64) · Commits · e / devices / android_kernel_xiaomi_markw

arch/blackfin/kernel/time-ts.c

+28 −2

Original line number	Diff line number	Diff line
		@@ -16,11 +16,35 @@
		#include <linux/irq.h>
		#include <linux/clocksource.h>
		#include <linux/clockchips.h>
		#include <linux/cpufreq.h>

		#include <asm/blackfin.h>
		#include <asm/time.h>

		#ifdef CONFIG_CYCLES_CLOCKSOURCE

		/* Accelerators for sched_clock()
		* convert from cycles(64bits) => nanoseconds (64bits)
		* basic equation:
		* ns = cycles / (freq / ns_per_sec)
		* ns = cycles * (ns_per_sec / freq)
		* ns = cycles * (10^9 / (cpu_khz * 10^3))
		* ns = cycles * (10^6 / cpu_khz)
		*
		* Then we use scaling math (suggested by george@mvista.com) to get:
		* ns = cycles * (10^6 * SC / cpu_khz) / SC
		* ns = cycles * cyc2ns_scale / SC
		*
		* And since SC is a constant power of two, we can convert the div
		* into a shift.
		*
		* We can use khz divisor instead of mhz to keep a better precision, since
		* cyc2ns_scale is limited to 10^6 * 2^10, which fits in 32 bits.
		* (mathieu.desnoyers@polymtl.ca)
		*
		* -johnstul@us.ibm.com "math is hard, lets go shopping!"
		*/

		static unsigned long cyc2ns_scale;
		#define CYC2NS_SCALE_FACTOR 10 /* 2^10, carefully chosen */

		@@ -82,8 +106,9 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
		{
		switch (mode) {
		case CLOCK_EVT_MODE_PERIODIC: {
		unsigned long tcount = ((get_cclk() / (HZ * 1)) - 1);
		unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1);
		bfin_write_TCNTL(TMPWR);
		bfin_write_TSCALE(TIME_SCALE - 1);
		CSYNC();
		bfin_write_TPERIOD(tcount);
		bfin_write_TCOUNT(tcount);
		@@ -92,6 +117,7 @@ static void bfin_timer_set_mode(enum clock_event_mode mode,
		break;
		}
		case CLOCK_EVT_MODE_ONESHOT:
		bfin_write_TSCALE(0);
		bfin_write_TCOUNT(0);
		bfin_write_TCNTL(TMPWR \| TMREN);
		CSYNC();
		@@ -115,7 +141,7 @@ static void __init bfin_timer_init(void)
		/*
		* the TSCALE prescaler counter.
		*/
		bfin_write_TSCALE(0);
		bfin_write_TSCALE(TIME_SCALE - 1);
		bfin_write_TPERIOD(0);
		bfin_write_TCOUNT(0);

arch/blackfin/kernel/time.c

+3 −16

Original line number	Diff line number	Diff line
		@@ -6,9 +6,10 @@
		* Created:
		* Description: This file contains the bfin-specific time handling details.
		* Most of the stuff is located in the machine specific files.
		* FIXME: (This file is subject for removal)
		*
		* Modified:
		* Copyright 2004-2006 Analog Devices Inc.
		* Copyright 2004-2008 Analog Devices Inc.
		*
		* Bugs: Enter bugs at http://blackfin.uclinux.org/
		*
		@@ -35,6 +36,7 @@
		#include <linux/irq.h>

		#include <asm/blackfin.h>
		#include <asm/time.h>

		/* This is an NTP setting */
		#define TICK_SIZE (tick_nsec / 1000)
		@@ -47,21 +49,6 @@ static struct irqaction bfin_timer_irq = {
		.flags = IRQF_DISABLED
		};

		/*
		* The way that the Blackfin core timer works is:
		* - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
		* - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
		*
		* If you take the fastest clock (1ns, or 1GHz to make the math work easier)
		* 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
		* (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
		* to use TSCALE, and program it to zero (which is pass CCLK through).
		* If you feel like using it, try to keep HZ * TIMESCALE to some
		* value that divides easy (like power of 2).
		*/

		#define TIME_SCALE 1

		static void
		time_sched_init(irq_handler_t timer_routine)
		{

arch/blackfin/mach-common/Makefile

+2 −1

Original line number	Diff line number	Diff line
		@@ -7,3 +7,4 @@ obj-y := \
		interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o

		obj-$(CONFIG_PM) += pm.o dpmc.o
		obj-$(CONFIG_CPU_FREQ) += cpufreq.o

arch/blackfin/mach-common/cpufreq.c

0 → 100644

+194 −0

Original line number	Diff line number	Diff line
		/*
		* File: arch/blackfin/mach-common/cpufreq.c
		* Based on:
		* Author:
		*
		* Created:
		* Description: Blackfin core clock scaling
		*
		* Modified:
		* Copyright 2004-2008 Analog Devices Inc.
		*
		* Bugs: Enter bugs at http://blackfin.uclinux.org/
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License as published by
		* the Free Software Foundation; either version 2 of the License, or
		* (at your option) any later version.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*
		* You should have received a copy of the GNU General Public License
		* along with this program; if not, see the file COPYING, or write
		* to the Free Software Foundation, Inc.,
		* 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
		*/

		#include <linux/kernel.h>
		#include <linux/types.h>
		#include <linux/init.h>
		#include <linux/cpufreq.h>
		#include <linux/fs.h>
		#include <asm/blackfin.h>
		#include <asm/time.h>


		/* this is the table of CCLK frequencies, in Hz */
		/* .index is the entry in the auxillary dpm_state_table[] */
		static struct cpufreq_frequency_table bfin_freq_table[] = {
		{
		.frequency = CPUFREQ_TABLE_END,
		.index = 0,
		},
		{
		.frequency = CPUFREQ_TABLE_END,
		.index = 1,
		},
		{
		.frequency = CPUFREQ_TABLE_END,
		.index = 2,
		},
		{
		.frequency = CPUFREQ_TABLE_END,
		.index = 0,
		},
		};

		static struct bfin_dpm_state {
		unsigned int csel; /* system clock divider */
		unsigned int tscale; /* change the divider on the core timer interrupt */
		} dpm_state_table[3];

		/**************************************************************************/

		static unsigned int bfin_getfreq(unsigned int cpu)
		{
		/* The driver only support single cpu */
		if (cpu != 0)
		return -1;

		return get_cclk();
		}


		static int bfin_target(struct cpufreq_policy *policy,
		unsigned int target_freq, unsigned int relation)
		{
		unsigned int index, plldiv, tscale;
		unsigned long flags, cclk_hz;
		struct cpufreq_freqs freqs;

		if (cpufreq_frequency_table_target(policy, bfin_freq_table,
		target_freq, relation, &index))
		return -EINVAL;

		cclk_hz = bfin_freq_table[index].frequency;

		freqs.old = bfin_getfreq(0);
		freqs.new = cclk_hz;
		freqs.cpu = 0;

		pr_debug("cpufreq: changing cclk to %lu; target = %u, oldfreq = %u\n",
		cclk_hz, target_freq, freqs.old);

		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
		local_irq_save(flags);
		plldiv = (bfin_read_PLL_DIV() & SSEL) \| dpm_state_table[index].csel;
		tscale = dpm_state_table[index].tscale;
		bfin_write_PLL_DIV(plldiv);
		/* we have to adjust the core timer, because it is using cclk */
		bfin_write_TSCALE(tscale);
		SSYNC();
		local_irq_restore(flags);
		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);

		return 0;
		}

		static int bfin_verify_speed(struct cpufreq_policy *policy)
		{
		return cpufreq_frequency_table_verify(policy, bfin_freq_table);
		}

		static int __init __bfin_cpu_init(struct cpufreq_policy *policy)
		{

		unsigned long cclk, sclk, csel, min_cclk;
		int index;

		#ifdef CONFIG_CYCLES_CLOCKSOURCE
		/*
		* Clocksource CYCLES is still CONTINUOUS but not longer MONOTONIC in case we enable
		* CPU frequency scaling, since CYCLES runs off Core Clock.
		*/
		printk(KERN_WARNING "CPU frequency scaling not supported: Clocksource not suitable\n"
		return -ENODEV;
		#endif

		if (policy->cpu != 0)
		return -EINVAL;

		cclk = get_cclk();
		sclk = get_sclk();

		#if ANOMALY_05000273
		min_cclk = sclk * 2;
		#else
		min_cclk = sclk;
		#endif
		csel = ((bfin_read_PLL_DIV() & CSEL) >> 4);

		for (index = 0; (cclk >> index) >= min_cclk && csel <= 3; index++, csel++) {
		bfin_freq_table[index].frequency = cclk >> index;
		dpm_state_table[index].csel = csel << 4; /* Shift now into PLL_DIV bitpos */
		dpm_state_table[index].tscale = (TIME_SCALE / (1 << csel)) - 1;

		pr_debug("cpufreq: freq:%d csel:%d tscale:%d\n",
		bfin_freq_table[index].frequency,
		dpm_state_table[index].csel,
		dpm_state_table[index].tscale);
		}

		policy->governor = CPUFREQ_DEFAULT_GOVERNOR;

		policy->cpuinfo.transition_latency = (bfin_read_PLL_LOCKCNT() / (sclk / 1000000)) * 1000;
		/Now ,only support one cpu /
		policy->cur = cclk;
		cpufreq_frequency_table_get_attr(bfin_freq_table, policy->cpu);
		return cpufreq_frequency_table_cpuinfo(policy, bfin_freq_table);
		}

		static struct freq_attr *bfin_freq_attr[] = {
		&cpufreq_freq_attr_scaling_available_freqs,
		NULL,
		};

		static struct cpufreq_driver bfin_driver = {
		.verify = bfin_verify_speed,
		.target = bfin_target,
		.get = bfin_getfreq,
		.init = __bfin_cpu_init,
		.name = "bfin cpufreq",
		.owner = THIS_MODULE,
		.attr = bfin_freq_attr,
		};

		static int __init bfin_cpu_init(void)
		{
		return cpufreq_register_driver(&bfin_driver);
		}

		static void __exit bfin_cpu_exit(void)
		{
		cpufreq_unregister_driver(&bfin_driver);
		}

		MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
		MODULE_DESCRIPTION("cpufreq driver for Blackfin");
		MODULE_LICENSE("GPL");

		module_init(bfin_cpu_init);
		module_exit(bfin_cpu_exit);

include/asm-blackfin/time.h

0 → 100644

+36 −0

Original line number	Diff line number	Diff line
		/*
		* asm-blackfin/time.h:
		*
		* Copyright 2004-2008 Analog Devices Inc.
		*
		* Licensed under the GPL-2 or later.
		*/

		#ifndef _ASM_BLACKFIN_TIME_H
		#define _ASM_BLACKFIN_TIME_H

		/*
		* The way that the Blackfin core timer works is:
		* - CCLK is divided by a programmable 8-bit pre-scaler (TSCALE)
		* - Every time TSCALE ticks, a 32bit is counted down (TCOUNT)
		*
		* If you take the fastest clock (1ns, or 1GHz to make the math work easier)
		* 10ms is 10,000,000 clock ticks, which fits easy into a 32-bit counter
		* (32 bit counter is 4,294,967,296ns or 4.2 seconds) so, we don't need
		* to use TSCALE, and program it to zero (which is pass CCLK through).
		* If you feel like using it, try to keep HZ * TIMESCALE to some
		* value that divides easy (like power of 2).
		*/

		#ifndef CONFIG_CPU_FREQ
		#define TIME_SCALE 1
		#else
		/*
		* Blackfin CPU frequency scaling supports max Core Clock 1, 1/2 and 1/4 .
		* Whenever we change the Core Clock frequency changes we immediately
		* adjust the Core Timer Presale Register. This way we don't lose time.
		*/
		#define TIME_SCALE 4
		#endif

		#endif