Merge "ARM: dts: msm: Add camera sensor device nodes for APQ8053" (e5b04012) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/apq8053-camera-sensor-mtp.dtsi

0 → 100644

+99 −0

Original line number	Diff line number	Diff line
		/*
		* Copyright (c) 2016, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&soc{
		led_ir0: qcom,ir-led {
		cell-index = <0>;
		compatible = "qcom,ir-led";
		label = "led-ir-label";
		pwms = <&pm8953_pwm 0 0>;
		};

		ir_cut0: qcom,ir-cut {
		cell-index = <0>;
		compatible = "qcom,ir-cut";
		label = "ir-cut-label";
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_ir_cut_default>;
		pinctrl-1 = <&cam_sensor_ir_cut_sleep>;
		gpios = <&tlmm 38 0>, <&tlmm 39 0>;
		qcom,gpio-ir-p = <0>;
		qcom,gpio-ir-m = <1>;
		qcom,gpio-req-tbl-num = <0 1>;
		qcom,gpio-req-tbl-flags = <0 0>;
		qcom,gpio-req-tbl-label = "IR_CUT_FILTER_P",
		"IR_CUT_FILTER_M";
		};
		};

		&pm8953_pwm {
		status = "okay";
		qcom,dtest-line = <2>; /* DTEST2 */
		qcom,dtest-output = <2>; /* OUTPUT PWM */
		};

		&pm8953_mpps {
		mpp@a300 {
		qcom,mode = <1>; /* DIG_OUT */
		qcom,output-type = <0>; /* CMOS */
		qcom,vin-sel = <3>; /* L5 @ 1.8V */
		qcom,src-sel = <5>; /* DTEST2 */
		qcom,master-en = <1>; /* Enable MPP */
		qcom,invert = <0>; /* Enable MPP */
		status = "okay";
		};
		};

		&cci {
		qcom,camera@0 {
		cell-index = <0>;
		compatible = "qcom,camera";
		reg = <0x0>;
		qcom,csiphy-sd-index = <0>;
		qcom,csid-sd-index = <0>;
		qcom,mount-angle = <270>;
		cam_vio-supply = <&pm8953_l6>;
		cam_vdig-supply = <&pm8953_s3>;
		cam_vana-supply = <&pm8953_l22>;
		qcom,ir-led-src = <&led_ir0>;
		qcom,ir-cut-src = <&ir_cut0>;
		qcom,cam-vreg-name = "cam_vio", "cam_vana";
		qcom,cam-vreg-min-voltage = <0 2800000>;
		qcom,cam-vreg-max-voltage = <0 2800000>;
		qcom,cam-vreg-op-mode = <0 105000 100000>;
		pinctrl-names = "cam_default", "cam_suspend";
		pinctrl-0 = <&cam_sensor_mclk0_default
		&cam_sensor_rear_default1
		&cam_sensor_rear_vana1>;
		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep1
		&cam_sensor_rear_vana_sleep1>;
		gpios = <&tlmm 26 0>,
		<&tlmm 40 0>,
		<&tlmm 46 0>;
		qcom,gpio-reset = <1>;
		qcom,gpio-vana = <2>;
		qcom,gpio-req-tbl-num = <0 1 2>;
		qcom,gpio-req-tbl-flags = <1 0 0>;
		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",
		"CAM_RESET0",
		"CAM_VANA";
		qcom,sensor-position = <0>;
		qcom,sensor-mode = <0>;
		qcom,cci-master = <0>;
		status = "ok";
		clocks = <&clock_gcc clk_mclk0_clk_src>,
		<&clock_gcc clk_gcc_camss_mclk0_clk>;
		clock-names = "cam_src_clk", "cam_clk";
		qcom,clock-rates = <24000000 0>;
		};
		};

arch/arm/boot/dts/qcom/apq8053-iot-mtp.dts

+1 −0

Original line number	Diff line number	Diff line
		@@ -15,6 +15,7 @@

		#include "apq8053.dtsi"
		#include "msm8953-mtp.dtsi"
		#include "apq8053-camera-sensor-mtp.dtsi"

		/ {
		model = "Qualcomm Technologies, Inc. APQ8053 IOT MTP";

arch/arm/boot/dts/qcom/msm8953-pinctrl.dtsi

+87 −3

Original line number	Diff line number	Diff line
		@@ -170,6 +170,62 @@
		};
		};

		cam_sensor_ir_cut_default: cam_sensor_ir_cut_default {
		/* RESET, STANDBY */
		mux {
		pins = "gpio38", "gpio39";
		function = "gpio";
		};

		config {
		pins = "gpio38","gpio39";
		bias-pull-up; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_ir_cut_sleep: cam_sensor_ir_cut_sleep {
		/* RESET, STANDBY */
		mux {
		pins = "gpio38","gpio39";
		function = "gpio";
		};

		config {
		pins = "gpio38","gpio39";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_default1: cam_sensor_rear_default1 {
		/* RESET*/
		mux {
		pins = "gpio40";
		function = "gpio";
		};

		config {
		pins = "gpio40";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_sleep1: cam_sensor_rear_sleep1 {
		/* RESET*/
		mux {
		pins = "gpio40";
		function = "gpio";
		};

		config {
		pins = "gpio40";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_vana: cam_sensor_rear_vdig {
		/* VDIG */
		mux {
		@@ -198,6 +254,34 @@
		};
		};

		cam_sensor_rear_vana1: cam_sensor_rear_vdig1 {
		/* VDIG */
		mux {
		pins = "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio46";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_rear_vana_sleep1: cam_sensor_rear_vdig_sleep1 {
		/* VDIG */
		mux {
		pins = "gpio46";
		function = "gpio";
		};

		config {
		pins = "gpio46";
		bias-disable; /* No PULL */
		drive-strength = <2>; /* 2 MA */
		};
		};

		cam_sensor_mclk1_default: cam_sensor_mclk1_default {
		/* MCLK1 */
		mux {