ARM: dts: msm: add camera dtsi file for msm8909

/*

 * Copyright (c) 2017 The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&soc {

	SY7803_default: SY7803_default {

		mux {

			/* CLK, DATA */

			pins = "gpio31", "gpio32";

			function = "gpio";

		};

		config {

			pins = "gpio31", "gpio32";

			bias-disable; /* No PULL */

			drive-strength = <2>; /* 2 MA */

		};

	};

	flash_SY7803:flashlight {

		compatible = "qcom,leds-gpio-flash";

		status = "okay";

		pinctrl-names = "flash_default";

		pinctrl-0 = <&SY7803_default>;

		qcom,flash-en = <&msm_gpio 31 0>;

		qcom,flash-now = <&msm_gpio 32 0>;

		qcom,op-seq = "flash_en", "flash_now";

		qcom,torch-seq-val = <1 0>;

		qcom,flash-seq-val = <1 1>;

		linux,name = "flashlight";

		linux,default-trigger = "flashlight-trigger";

	};

	led_flash0: qcom,camera-led-flash {

		cell-index = <0>;

		compatible = "qcom,camera-led-flash";

		qcom,flash-type = <3>;

		qcom,flash-source = <&flash_SY7803>;

		qcom,torch-source = <&flash_SY7803>;

	};

};

&i2c_3 {

	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x2>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,led-flash-src = <&led_flash0>;

		cam_vana-supply = <&pm8909_l17>;

		cam_vio-supply = <&pm8909_l6>;

		cam_vaf-supply = <&pm8909_l8>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana",

			"cam_vaf";

		qcom,cam-vreg-type = <1 0 0>;

		qcom,cam-vreg-min-voltage = <0 2800000 2850000>;

		qcom,cam-vreg-max-voltage = <0 2850000 2900000>;

		qcom,cam-vreg-op-mode = <0 80000 100000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_default

			&cam_sensor_rear_default>;

		pinctrl-1 = <&cam_sensor_mclk0_sleep &cam_sensor_rear_sleep>;

		gpios = <&msm_gpio 26 0>,

			<&msm_gpio 35 0>,

			<&msm_gpio 34 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET1",

			"CAM_STANDBY";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk0_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		cam_vana-supply = <&pm8909_l17>;

		cam_vio-supply = <&pm8909_l6>;

		qcom,cam-vreg-name = "cam_vio", "cam_vana";

		qcom,cam-vreg-type = <1 0>;

		qcom,cam-vreg-min-voltage = <0 2800000>;

		qcom,cam-vreg-max-voltage = <0 2850000>;

		qcom,cam-vreg-op-mode = <0 80000>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_default

				&cam_sensor_front_default>;

		pinctrl-1 = <&cam_sensor_mclk1_sleep &cam_sensor_front_sleep>;

		gpios = <&msm_gpio 27 0>,

			<&msm_gpio 28 0>,

			<&msm_gpio 33 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK",

			"CAM_RESET",

			"CAM_STANDBY";

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_gcc clk_mclk1_clk_src>,

			<&clock_gcc clk_gcc_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

		qcom,clock-rates = <24000000 0>;

	};

};

 */

#include "msm8909-qrd.dtsi"

#include "msm8909-camera-sensor-skue.dtsi"

/ {

	model = "Qualcomm Technologies, Inc. MSM8909 QRD SKUE";