Loading arch/arm/boot/dts/qcom/Makefile +7 −1 Original line number Diff line number Diff line Loading @@ -169,7 +169,13 @@ dtb-$(CONFIG_ARCH_SDX20) += sdx20-emmc-cdp.dtb \ sdx20-nand-cdp.dtb \ sdx20-nand-mtp.dtb \ sdx20-nand-dualwifi-mtp.dtb \ sdx20-nand-dualwifi-cdp.dtb sdx20-nand-dualwifi-cdp.dtb \ sdx20-v2-emmc-cdp.dtb \ sdx20-v2-emmc-mtp.dtb \ sdx20-v2-nand-cdp.dtb \ sdx20-v2-nand-mtp.dtb \ sdx20-v2-nand-dualwifi-mtp.dtb \ sdx20-v2-nand-dualwifi-cdp.dtb dtb-$(CONFIG_ARCH_MSM8937) += msm8937-rumi.dtb \ msm8937-pmi8950-cdp.dtb \ Loading arch/arm/boot/dts/qcom/sdx20-v2-emmc-cdp.dts 0 → 100644 +51 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP (eMMC)"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x00030000>, <1 0x00030100>; qcom,rmtfs_sharedmem@0 { compatible = "qcom,sharedmem-uio"; reg = <0x0 0x00100000>; reg-names = "rmtfs"; qcom,client-id = <0x00000001>; }; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <100 200000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <8>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; qcom,nonremovable; status = "ok"; }; arch/arm/boot/dts/qcom/sdx20-v2-emmc-mtp.dts 0 → 100644 +55 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-mtp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 MTP (eMMC)"; compatible = "qcom,sdx20-mtp", "qcom,sdx20", "qcom,mtp"; qcom,board-id = <8 0x00030000>, <8 0x00030100>; qcom,rmtfs_sharedmem@0 { compatible = "qcom,sharedmem-uio"; reg = <0x0 0x00100000>; reg-names = "rmtfs"; qcom,client-id = <0x00000001>; }; }; &qnand_1 { status = "disabled"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <100 200000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <8>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; qcom,nonremovable; status = "ok"; }; arch/arm/boot/dts/qcom/sdx20-v2-nand-cdp.dts 0 → 100644 +48 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP (NAND)"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x0>, <1 0x100>; }; &qnand_1 { status = "ok"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l7>; qcom,vdd-io-voltage-level = <1800000 2848000>; qcom,vdd-io-current-level = <200 10000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <4>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; /* TODO: Add card detect GPIO */ status = "ok"; }; arch/arm/boot/dts/qcom/sdx20-v2-nand-dualwifi-cdp.dts 0 → 100644 +69 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP - DWIFI"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x2>, <1 0x102>; }; &qnand_1 { status = "ok"; }; &smb1351_otg_supply { status = "disabled"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-always-on; qcom,vdd-io-current-level = <200 10000>; qcom,clk-rates = <400000 20000000 25000000 50000000>; qcom,bus-width = <4>; qcom,core_3_0v_support; qcom,nonremovable; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_wlan_gpio_active>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_wlan_gpio_sleep>; #address-cells = <0>; interrupt-parent = <&sdhc_1>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 123 0 1 &intc 0 138 0 2 &tlmm_pinmux 81 0x4>; interrupt-names = "hc_irq", "pwr_irq", "sdiowakeup_irq"; status = "ok"; }; &cnss_pcie { qcom,is-dual-wifi-enabled; }; &cnss_sdio { status = "ok"; }; Loading
arch/arm/boot/dts/qcom/Makefile +7 −1 Original line number Diff line number Diff line Loading @@ -169,7 +169,13 @@ dtb-$(CONFIG_ARCH_SDX20) += sdx20-emmc-cdp.dtb \ sdx20-nand-cdp.dtb \ sdx20-nand-mtp.dtb \ sdx20-nand-dualwifi-mtp.dtb \ sdx20-nand-dualwifi-cdp.dtb sdx20-nand-dualwifi-cdp.dtb \ sdx20-v2-emmc-cdp.dtb \ sdx20-v2-emmc-mtp.dtb \ sdx20-v2-nand-cdp.dtb \ sdx20-v2-nand-mtp.dtb \ sdx20-v2-nand-dualwifi-mtp.dtb \ sdx20-v2-nand-dualwifi-cdp.dtb dtb-$(CONFIG_ARCH_MSM8937) += msm8937-rumi.dtb \ msm8937-pmi8950-cdp.dtb \ Loading
arch/arm/boot/dts/qcom/sdx20-v2-emmc-cdp.dts 0 → 100644 +51 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP (eMMC)"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x00030000>, <1 0x00030100>; qcom,rmtfs_sharedmem@0 { compatible = "qcom,sharedmem-uio"; reg = <0x0 0x00100000>; reg-names = "rmtfs"; qcom,client-id = <0x00000001>; }; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <100 200000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <8>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; qcom,nonremovable; status = "ok"; };
arch/arm/boot/dts/qcom/sdx20-v2-emmc-mtp.dts 0 → 100644 +55 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-mtp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 MTP (eMMC)"; compatible = "qcom,sdx20-mtp", "qcom,sdx20", "qcom,mtp"; qcom,board-id = <8 0x00030000>, <8 0x00030100>; qcom,rmtfs_sharedmem@0 { compatible = "qcom,sharedmem-uio"; reg = <0x0 0x00100000>; reg-names = "rmtfs"; qcom,client-id = <0x00000001>; }; }; &qnand_1 { status = "disabled"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-current-level = <100 200000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <8>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; qcom,bus-speed-mode = "HS200_1p8v", "DDR_1p8v"; qcom,nonremovable; status = "ok"; };
arch/arm/boot/dts/qcom/sdx20-v2-nand-cdp.dts 0 → 100644 +48 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP (NAND)"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x0>, <1 0x100>; }; &qnand_1 { status = "ok"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l7>; qcom,vdd-io-voltage-level = <1800000 2848000>; qcom,vdd-io-current-level = <200 10000>; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>; qcom,bus-width = <4>; qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 200000000>; qcom,devfreq,freq-table = <50000000 200000000>; /* TODO: Add card detect GPIO */ status = "ok"; };
arch/arm/boot/dts/qcom/sdx20-v2-nand-dualwifi-cdp.dts 0 → 100644 +69 −0 Original line number Diff line number Diff line /* Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "sdx20-cdp.dtsi" #include "sdx20-v2.dtsi" / { model = "Qualcomm Technologies, Inc. SDX20 V2 CDP - DWIFI"; compatible = "qcom,sdx20-cdp", "qcom,sdx20", "qcom,cdp"; qcom,board-id = <1 0x2>, <1 0x102>; }; &qnand_1 { status = "ok"; }; &smb1351_otg_supply { status = "disabled"; }; &sdhc_1 { vdd-supply = <&sdc_vreg>; vdd-io-supply = <&pmd9650_l6>; qcom,vdd-io-voltage-level = <1800000 1800000>; qcom,vdd-io-always-on; qcom,vdd-io-current-level = <200 10000>; qcom,clk-rates = <400000 20000000 25000000 50000000>; qcom,bus-width = <4>; qcom,core_3_0v_support; qcom,nonremovable; pinctrl-names = "active", "sleep"; pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_wlan_gpio_active>; pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_wlan_gpio_sleep>; #address-cells = <0>; interrupt-parent = <&sdhc_1>; interrupts = <0 1 2>; #interrupt-cells = <1>; interrupt-map-mask = <0xffffffff>; interrupt-map = <0 &intc 0 123 0 1 &intc 0 138 0 2 &tlmm_pinmux 81 0x4>; interrupt-names = "hc_irq", "pwr_irq", "sdiowakeup_irq"; status = "ok"; }; &cnss_pcie { qcom,is-dual-wifi-enabled; }; &cnss_sdio { status = "ok"; };
