Merge tag 'v3.12-rc4' into next (e3c55d40) · Commits · e / devices / android_kernel_xiaomi_markw

CREDITS

+7 −8

Original line number	Diff line number	Diff line
		@@ -637,14 +637,13 @@ S: 14509 NE 39th Street #1096
		S: Bellevue, Washington 98007
		S: USA

		N: Christopher L. Cheney
		E: ccheney@debian.org
		E: ccheney@cheney.cx
		W: http://www.cheney.cx
		N: Chris Cheney
		E: chris.cheney@gmail.com
		E: ccheney@redhat.com
		P: 1024D/8E384AF2 2D31 1927 87D7 1F24 9FF9 1BC5 D106 5AB3 8E38 4AF2
		D: Vista Imaging usb webcam driver
		S: 314 Prince of Wales
		S: Conroe, TX 77304
		S: 2308 Therrell Way
		S: McKinney, TX 75070
		S: USA

		N: Stuart Cheshire
		@@ -1120,6 +1119,7 @@ D: author of userfs filesystem
		D: Improved mmap and munmap handling
		D: General mm minor tidyups
		D: autofs v4 maintainer
		D: Xen subsystem
		S: 987 Alabama St
		S: San Francisco
		S: CA, 94110
		@@ -2808,8 +2808,7 @@ S: Ottawa, Ontario
		S: Canada K2P 0X8

		N: Mikael Pettersson
		E: mikpe@it.uu.se
		W: http://user.it.uu.se/~mikpe/linux/
		E: mikpelinux@gmail.com
		D: Miscellaneous fixes

		N: Reed H. Petty

Documentation/00-INDEX

+1 −1

Original line number	Diff line number	Diff line
		@@ -40,7 +40,7 @@ IPMI.txt
		IRQ-affinity.txt
		- how to select which CPU(s) handle which interrupt events on SMP.
		IRQ-domain.txt
		- info on inerrupt numbering and setting up IRQ domains.
		- info on interrupt numbering and setting up IRQ domains.
		IRQ.txt
		- description of what an IRQ is.
		Intel-IOMMU.txt

Documentation/ABI/stable/sysfs-bus-usb

0 → 100644

+142 −0

Original line number	Diff line number	Diff line
		What: /sys/bus/usb/devices/.../power/persist
		Date: May 2007
		KernelVersion: 2.6.23
		Contact: Alan Stern <stern@rowland.harvard.edu>
		Description:
		If CONFIG_USB_PERSIST is set, then each USB device directory
		will contain a file named power/persist. The file holds a
		boolean value (0 or 1) indicating whether or not the
		"USB-Persist" facility is enabled for the device. Since the
		facility is inherently dangerous, it is disabled by default
		for all devices except hubs. For more information, see
		Documentation/usb/persist.txt.

		What: /sys/bus/usb/devices/.../power/autosuspend
		Date: March 2007
		KernelVersion: 2.6.21
		Contact: Alan Stern <stern@rowland.harvard.edu>
		Description:
		Each USB device directory will contain a file named
		power/autosuspend. This file holds the time (in seconds)
		the device must be idle before it will be autosuspended.
		0 means the device will be autosuspended as soon as
		possible. Negative values will prevent the device from
		being autosuspended at all, and writing a negative value
		will resume the device if it is already suspended.

		The autosuspend delay for newly-created devices is set to
		the value of the usbcore.autosuspend module parameter.

		What: /sys/bus/usb/device/.../power/connected_duration
		Date: January 2008
		KernelVersion: 2.6.25
		Contact: Sarah Sharp <sarah.a.sharp@intel.com>
		Description:
		If CONFIG_PM_RUNTIME is enabled then this file
		is present. When read, it returns the total time (in msec)
		that the USB device has been connected to the machine. This
		file is read-only.
		Users:
		PowerTOP <power@bughost.org>
		http://www.lesswatts.org/projects/powertop/

		What: /sys/bus/usb/device/.../power/active_duration
		Date: January 2008
		KernelVersion: 2.6.25
		Contact: Sarah Sharp <sarah.a.sharp@intel.com>
		Description:
		If CONFIG_PM_RUNTIME is enabled then this file
		is present. When read, it returns the total time (in msec)
		that the USB device has been active, i.e. not in a suspended
		state. This file is read-only.

		Tools can use this file and the connected_duration file to
		compute the percentage of time that a device has been active.
		For example,
		echo $((100 * `cat active_duration` / `cat connected_duration`))
		will give an integer percentage. Note that this does not
		account for counter wrap.
		Users:
		PowerTOP <power@bughost.org>
		http://www.lesswatts.org/projects/powertop/

		What: /sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
		Date: January 2008
		KernelVersion: 2.6.27
		Contact: Sarah Sharp <sarah.a.sharp@intel.com>
		Description:
		When read, this file returns 1 if the interface driver
		for this interface supports autosuspend. It also
		returns 1 if no driver has claimed this interface, as an
		unclaimed interface will not stop the device from being
		autosuspended if all other interface drivers are idle.
		The file returns 0 if autosuspend support has not been
		added to the driver.
		Users:
		USB PM tool
		git://git.moblin.org/users/sarah/usb-pm-tool/

		What: /sys/bus/usb/device/.../avoid_reset_quirk
		Date: December 2009
		Contact: Oliver Neukum <oliver@neukum.org>
		Description:
		Writing 1 to this file tells the kernel that this
		device will morph into another mode when it is reset.
		Drivers will not use reset for error handling for
		such devices.
		Users:
		usb_modeswitch

		What: /sys/bus/usb/devices/.../devnum
		KernelVersion: since at least 2.6.18
		Description:
		Device address on the USB bus.
		Users:
		libusb

		What: /sys/bus/usb/devices/.../bConfigurationValue
		KernelVersion: since at least 2.6.18
		Description:
		bConfigurationValue of the active configuration for the
		device. Writing 0 or -1 to bConfigurationValue will reset the
		active configuration (unconfigure the device). Writing
		another value will change the active configuration.

		Note that some devices, in violation of the USB spec, have a
		configuration with a value equal to 0. Writing 0 to
		bConfigurationValue for these devices will install that
		configuration, rather then unconfigure the device.

		Writing -1 will always unconfigure the device.
		Users:
		libusb

		What: /sys/bus/usb/devices/.../busnum
		KernelVersion: 2.6.22
		Description:
		Bus-number of the USB-bus the device is connected to.
		Users:
		libusb

		What: /sys/bus/usb/devices/.../descriptors
		KernelVersion: 2.6.26
		Description:
		Binary file containing cached descriptors of the device. The
		binary data consists of the device descriptor followed by the
		descriptors for each configuration of the device.
		Note that the wTotalLength of the config descriptors can not
		be trusted, as the device may have a smaller config descriptor
		than it advertises. The bLength field of each (sub) descriptor
		can be trusted, and can be used to seek forward one (sub)
		descriptor at a time until the next config descriptor is found.
		All descriptors read from this file are in bus-endian format
		Users:
		libusb

		What: /sys/bus/usb/devices/.../speed
		KernelVersion: since at least 2.6.18
		Description:
		Speed the device is connected with to the usb-host in
		Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
		Users:
		libusb

Documentation/ABI/testing/sysfs-block-zram

+5 −4

Original line number	Diff line number	Diff line
		@@ -5,20 +5,21 @@ Description:
		The disksize file is read-write and specifies the disk size
		which represents the limit on the uncompressed worth of data
		that can be stored in this disk.
		Unit: bytes

		What: /sys/block/zram<id>/initstate
		Date: August 2010
		Contact: Nitin Gupta <ngupta@vflare.org>
		Description:
		The disksize file is read-only and shows the initialization
		The initstate file is read-only and shows the initialization
		state of the device.

		What: /sys/block/zram<id>/reset
		Date: August 2010
		Contact: Nitin Gupta <ngupta@vflare.org>
		Description:
		The disksize file is write-only and allows resetting the
		device. The reset operation frees all the memory assocaited
		The reset file is write-only and allows resetting the
		device. The reset operation frees all the memory associated
		with this device.

		What: /sys/block/zram<id>/num_reads
		@@ -48,7 +49,7 @@ Contact: Nitin Gupta <ngupta@vflare.org>
		Description:
		The notify_free file is read-only and specifies the number of
		swap slot free notifications received by this device. These
		notifications are send to a swap block device when a swap slot
		notifications are sent to a swap block device when a swap slot
		is freed. This statistic is applicable only when this disk is
		being used as a swap disk.

Documentation/ABI/testing/sysfs-bus-iio

+19 −0

Original line number	Diff line number	Diff line
		@@ -351,6 +351,7 @@ Description:
		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
		500kohm_to_gnd: connected to ground via a 500kOhm resistor,
		three_state: left floating.
		For a list of available output power down options read
		outX_powerdown_mode_available. If Y is not present the
		@@ -792,3 +793,21 @@ Contact: linux-iio@vger.kernel.org
		Description:
		This attribute is used to read the amount of quadrature error
		present in the device at a given time.

		What: /sys/.../iio:deviceX/in_accelX_power_mode
		KernelVersion: 3.11
		Contact: linux-iio@vger.kernel.org
		Description:
		Specifies the chip power mode.
		low_noise: reduce noise level from ADC,
		low_power: enable low current consumption.
		For a list of available output power modes read
		in_accel_power_mode_available.

		What: /sys/bus/iio/devices/iio:deviceX/store_eeprom
		KernelVersion: 3.4.0
		Contact: linux-iio@vger.kernel.org
		Description:
		Writing '1' stores the current device configuration into
		on-chip EEPROM. After power-up or chip reset the device will
		automatically load the saved configuration.