Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit de0710aa authored by Eric Miao's avatar Eric Miao
Browse files

[ARM] pxa: re-order platforms in Kconfig and Makefile 



Due to the naming mess in Kconfig and Makefile, I'd like to get them sorted
in the following order:

 1. By category:
    Intel/Marvell Dev Platforms, followed by 3rd party platforms, followed
    by end-user products (this is to ensure the commonly referenced platforms
    will appear first)

 2. By vendor name in alphabetic within each category
    (this is to ensure code reuse and similar platforms can be grouped as
     much as possible)

	   VENDOR        BOARD
	Intel/Marvell   Lubbock
	Intel/Marvell   Mainstone
	Intel/Marvell   Zylonite
	Intel/Marvell   Littleton
	Intel/Marvell   TavorEVB
	Intel/Marvell   SAAR

	Accelent        IDP
	Arcom/Eurotech  VIPER
	Community       Balloon3
	Cogent          CSB726
	CompuLab        EM_X270
	CompuLab        EXEDA
	CompuLab        ARMCORE
	CompuLab        CM_X300
	Gumstix         Gumstix
	Intel Research  MOTE2
	Intel research  Stargate2
	Iskratel        XCEP
	Keith and Koep  Trizeps4
	LogicPD         LPD270
	Phytec          PCM027
	Toradex         Colibri

	HP              HX4700
	HP              H5000
	HTC             Himalaya
	HTC             Magician
	Mitac           MioA701
	Motorola        EZX
	NEC             MP900C
	Palm            Palm PDA
	Palm            Palm GSM
	Sharp           Zaurus
	Toshiba         E-Series

Signed-off-by: default avatarEric Miao <eric.y.miao@gmail.com>
parent d0a92fd3

arch/arm/mach-pxa/Kconfig

+286 −280
Original line number Diff line number Diff line
@@ -31,216 +31,144 @@ endmenu 


endif



config ARCH_GUMSTIX

	bool "Gumstix XScale 255 boards"

	select PXA25x

	help

	  Say Y here if you intend to run this kernel on

	  Basix, Connex, ws-200ax, ws-400ax systems



choice

	prompt "Gumstix Carrier/Expansion Board"

	depends on ARCH_GUMSTIX



config GUMSTIX_AM200EPD

	bool "Enable AM200EPD board support"



config GUMSTIX_AM300EPD

	bool "Enable AM300EPD board support"



endchoice



config MACH_INTELMOTE2

	bool "Intel Mote 2 Platform"

	select PXA27x

	select IWMMXT

	select PXA_HAVE_BOARD_IRQS



config MACH_STARGATE2

	bool "Intel Stargate 2 Platform"

	select PXA27x

	select IWMMXT

	select PXA_HAVE_BOARD_IRQS

comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"



config ARCH_LUBBOCK

	bool "Intel DBPXA250 Development Platform"

	bool "Intel DBPXA250 Development Platform (aka Lubbock)"

	select PXA25x

	select SA1111

	select PXA_HAVE_BOARD_IRQS



config MACH_LOGICPD_PXA270

	bool "LogicPD PXA270 Card Engine Development Platform"

config MACH_MAINSTONE

	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"

	select PXA27x

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_MAINSTONE

	bool "Intel HCDDBBVA0 Development Platform"

	select PXA27x

config MACH_ZYLONITE

	bool "PXA3xx Development Platform (aka Zylonite)"

	select PXA3xx

	select PXA_SSP

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_MP900C

	bool "Nec Mobilepro 900/c"

config MACH_LITTLETON

	bool "PXA3xx Form Factor Platform (aka Littleton)"

	select PXA3xx

	select PXA_SSP



config MACH_TAVOREVB

	bool "PXA930 Evaluation Board (aka TavorEVB)"

	select PXA3xx

	select CPU_PXA930



config MACH_SAAR

	bool "PXA930 Handheld Platform (aka SAAR)"

	select PXA3xx

	select CPU_PXA930



comment "Third Party Dev Platforms (sorted by vendor name)"



config ARCH_PXA_IDP

	bool "Accelent Xscale IDP"

	select PXA25x



config ARCH_VIPER

	bool "Arcom/Eurotech VIPER SBC"

	select PXA25x

	select ISA

	select I2C_GPIO

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS

	select PXA_HAVE_ISA_IRQS



config MACH_BALLOON3

	bool "Balloon 3 board"

	select PXA27x

	select IWMMXT

	select PXA_HAVE_BOARD_IRQS



config ARCH_PXA_IDP

	bool "Accelent Xscale IDP"

	select PXA25x



config PXA_SHARPSL

	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"

	select SHARP_SCOOP

	select SHARP_PARAM

config MACH_CSB726

	bool "Enable Cogent CSB726 System On a Module"

	select PXA27x

	select IWMMXT

	help

	  Say Y here if you intend to run this kernel on a

	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),

	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),

	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)

	  handheld computer.



config SHARPSL_PM

	bool

	select APM_EMULATION

	  Say Y here if you intend to run this kernel on a Cogent

	  CSB726 System On Module.



config CORGI_SSP_DEPRECATED

	bool

	select PXA_SSP

	help

	  This option will include corgi_ssp.c and corgi_lcd.c

	  that corgi_ts.c and other legacy drivers (corgi_bl.c

	  and sharpsl_pm.c) may depend on.

config CSB726_CSB701

	bool "Enable support for CSB701 baseboard"

	depends on MACH_CSB726



config MACH_POODLE

	bool "Enable Sharp SL-5600 (Poodle) Support"

	depends on PXA_SHARPSL

config MACH_ARMCORE

	bool "CompuLab CM-X255/CM-X270 modules"

	select PXA27x

	select IWMMXT

	select PXA25x

	select SHARP_LOCOMO

	select PXA_SSP



config MACH_CORGI

	bool "Enable Sharp SL-C700 (Corgi) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



config MACH_SHEPHERD

	bool "Enable Sharp SL-C750 (Shepherd) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



config MACH_HUSKY

	bool "Enable Sharp SL-C760 (Husky) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



config MACH_AKITA

	bool "Enable Sharp SL-1000 (Akita) Support"

	depends on PXA_SHARPSL

	select PXA27x

	select PXA_SHARP_Cxx00

	select MACH_SPITZ

	select I2C

	select I2C_PXA



config MACH_SPITZ

	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"

	depends on PXA_SHARPSL

config MACH_EM_X270

	bool "CompuLab EM-x270 platform"

	select PXA27x

	select PXA_SHARP_Cxx00



config MACH_BORZOI

	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"

	depends on PXA_SHARPSL

config MACH_EXEDA

	bool "CompuLab eXeda platform"

	select PXA27x

	select PXA_SHARP_Cxx00



config MACH_TOSA

	bool "Enable Sharp SL-6000x (Tosa) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_HAVE_BOARD_IRQS

config MACH_CM_X300

	bool "CompuLab CM-X300 modules"

	select PXA3xx

	select CPU_PXA300



config ARCH_VIPER

	bool "Arcom/Eurotech VIPER SBC"

config ARCH_GUMSTIX

	bool "Gumstix XScale 255 boards"

	select PXA25x

	select ISA

	select I2C_GPIO

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS

	select PXA_HAVE_ISA_IRQS

	help

	  Say Y here if you intend to run this kernel on

	  Basix, Connex, ws-200ax, ws-400ax systems



config ARCH_PXA_ESERIES

	bool "PXA based Toshiba e-series PDAs"

	select PXA25x

	select PXA_HAVE_BOARD_IRQS

choice

	prompt "Gumstix Carrier/Expansion Board"

	depends on ARCH_GUMSTIX



config MACH_E330

	bool "Toshiba e330"

	default y

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e330 family PDA.

config GUMSTIX_AM200EPD

	bool "Enable AM200EPD board support"



config MACH_E350

	bool "Toshiba e350"

	default y

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e350 family PDA.

config GUMSTIX_AM300EPD

	bool "Enable AM300EPD board support"



config MACH_E740

	bool "Toshiba e740"

	default y

	depends on ARCH_PXA_ESERIES

	select FB_W100

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e740 family PDA.

endchoice



config MACH_E750

	bool "Toshiba e750"

	default y

	depends on ARCH_PXA_ESERIES

	select FB_W100

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e750 family PDA.

config MACH_INTELMOTE2

	bool "Intel Mote 2 Platform"

	select PXA27x

	select IWMMXT

	select PXA_HAVE_BOARD_IRQS



config MACH_E400

	bool "Toshiba e400"

	default y

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e400 family PDA.

config MACH_STARGATE2

	bool "Intel Stargate 2 Platform"

	select PXA27x

	select IWMMXT

	select PXA_HAVE_BOARD_IRQS



config MACH_E800

	bool "Toshiba e800"

	default y

	depends on ARCH_PXA_ESERIES

	select FB_W100

config MACH_XCEP

	bool "Iskratel Electronics XCEP"

	select PXA25x

	select MTD

	select MTD_PARTITIONS

	select MTD_PHYSMAP

	select MTD_CFI_INTELEXT

	select MTD_CFI

	select MTD_CHAR

	select SMC91X

	select PXA_SSP

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e800 family PDA.

	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.

	  Tuned for usage in Libera instruments for particle accelerators.



config TRIZEPS_PXA

	bool "PXA based Keith und Koep Trizeps DIMM-Modules"



config MACH_H5000

	bool "HP iPAQ h5000"

	select PXA25x



config MACH_TRIZEPS4

	bool "Keith und Koep Trizeps4 DIMM-Module"

	depends on TRIZEPS_PXA
@@ -274,62 +202,55 @@ config TRIZEPS_PCMCIA 
	help

	  Enable PCMCIA support for Trizeps modules



config MACH_EM_X270

	bool "CompuLab EM-x270 platform"

	select PXA27x



config MACH_EXEDA

	bool "CompuLab eXeda platform"

config MACH_LOGICPD_PXA270

	bool "LogicPD PXA270 Card Engine Development Platform"

	select PXA27x

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_COLIBRI

	bool "Toradex Colibri PXA270"

config MACH_PCM027

	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"

	select PXA27x

	select IWMMXT

	select PXA_SSP

	select PXA_HAVE_BOARD_IRQS



config MACH_COLIBRI300

	bool "Toradex Colibri PXA300/310"

	select PXA3xx

	select CPU_PXA300

config MACH_PCM990_BASEBOARD

	bool "PHYTEC PCM-990 development board"

	select HAVE_PWM

	depends on MACH_PCM027



config MACH_COLIBRI320

	bool "Toradex Colibri PXA320"

	select PXA3xx

	select CPU_PXA320

choice

	prompt "display on pcm990"

	depends on MACH_PCM990_BASEBOARD



config MACH_ZYLONITE

	bool "PXA3xx Development Platform (aka Zylonite)"

	select PXA3xx

	select PXA_SSP

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS

config PCM990_DISPLAY_SHARP

	bool "sharp lq084v1dg21 stn display"



config MACH_LITTLETON

	bool "PXA3xx Form Factor Platform (aka Littleton)"

	select PXA3xx

	select PXA_SSP

config PCM990_DISPLAY_NEC

	bool "nec nl6448bc20_18d tft display"



config MACH_TAVOREVB

	bool "PXA930 Evaluation Board (aka TavorEVB)"

	select PXA3xx

	select CPU_PXA930

config PCM990_DISPLAY_NONE

	bool "no display"



config MACH_SAAR

	bool "PXA930 Handheld Platform (aka SAAR)"

	select PXA3xx

	select CPU_PXA930

endchoice



config MACH_ARMCORE

	bool "CompuLab CM-X255/CM-X270 modules"

config MACH_COLIBRI

	bool "Toradex Colibri PXA270"

	select PXA27x

	select IWMMXT

	select PXA25x

	select PXA_SSP



config MACH_CM_X300

	bool "CompuLab CM-X300 modules"

config MACH_COLIBRI300

	bool "Toradex Colibri PXA300/310"

	select PXA3xx

	select CPU_PXA300



config MACH_COLIBRI320

	bool "Toradex Colibri PXA320"

	select PXA3xx

	select CPU_PXA320



comment "End-user Products (sorted by vendor name)"



config MACH_H4700

	bool "HP iPAQ hx4700"

	select PXA27x
@@ -338,6 +259,15 @@ config MACH_H4700 
	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_H5000

	bool "HP iPAQ h5000"

	select PXA25x



config MACH_HIMALAYA

	bool "HTC Himalaya Support"

	select CPU_PXA26x

	select FB_W100



config MACH_MAGICIAN

	bool "Enable HTC Magician Support"

	select PXA27x
@@ -346,11 +276,6 @@ config MACH_MAGICIAN 
	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_HIMALAYA

	bool "HTC Himalaya Support"

	select CPU_PXA26x

	select FB_W100



config MACH_MIOA701

	bool "Mitac Mio A701 Support"

	select PXA27x
@@ -362,13 +287,47 @@ config MACH_MIOA701 
	  MIO A701. Currently there is only basic support

	  for this PDA.



config MACH_PCM027

	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"

config PXA_EZX

	bool "Motorola EZX Platform"

	select PXA27x

	select IWMMXT

	select PXA_SSP

	select HAVE_PWM

	select PXA_HAVE_BOARD_IRQS



config MACH_EZX_A780

	bool "Motorola EZX A780"

	default y

	depends on PXA_EZX



config MACH_EZX_E680

	bool "Motorola EZX E680"

	default y

	depends on PXA_EZX



config MACH_EZX_A1200

	bool "Motorola EZX A1200"

	default y

	depends on PXA_EZX



config MACH_EZX_A910

	bool "Motorola EZX A910"

	default y

	depends on PXA_EZX



config MACH_EZX_E6

	bool "Motorola EZX E6"

	default y

	depends on PXA_EZX



config MACH_EZX_E2

	bool "Motorola EZX E2"

	default y

	depends on PXA_EZX



config MACH_MP900C

	bool "Nec Mobilepro 900/c"

	select PXA25x



config ARCH_PXA_PALM

	bool "PXA based Palm PDAs"

	select HAVE_PWM
@@ -421,6 +380,16 @@ config MACH_PALMZ72 
	  Say Y here if you intend to run this kernel on Palm Zire 72

	  handheld computer.



config MACH_PALMLD

	bool "Palm LifeDrive"

	default y

	depends on ARCH_PXA_PALM

	select PXA27x

	select IWMMXT

	help

	  Say Y here if you intend to run this kernel on a Palm LifeDrive

	  handheld computer.



config PALM_TREO

	bool

	depends on ARCH_PXA_PALM
@@ -447,99 +416,136 @@ config MACH_TREO680 
	  Say Y here if you intend to run this kernel on Palm Treo 680

	  smartphone.



config MACH_PALMLD

	bool "Palm LifeDrive"

	default y

	depends on ARCH_PXA_PALM

	select PXA27x

	select IWMMXT

config PXA_SHARPSL

	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"

	select SHARP_SCOOP

	select SHARP_PARAM

	help

	  Say Y here if you intend to run this kernel on a Palm LifeDrive

	  Say Y here if you intend to run this kernel on a

	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),

	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),

	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)

	  handheld computer.



config MACH_PCM990_BASEBOARD

	bool "PHYTEC PCM-990 development board"

	select HAVE_PWM

	depends on MACH_PCM027

config SHARPSL_PM

	bool

	select APM_EMULATION



choice

	prompt "display on pcm990"

	depends on MACH_PCM990_BASEBOARD

config CORGI_SSP_DEPRECATED

	bool

	select PXA_SSP

	help

	  This option will include corgi_ssp.c and corgi_lcd.c

	  that corgi_ts.c and other legacy drivers (corgi_bl.c

	  and sharpsl_pm.c) may depend on.



config PCM990_DISPLAY_SHARP

	bool "sharp lq084v1dg21 stn display"

config MACH_POODLE

	bool "Enable Sharp SL-5600 (Poodle) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select SHARP_LOCOMO

	select PXA_SSP



config PCM990_DISPLAY_NEC

	bool "nec nl6448bc20_18d tft display"

config MACH_CORGI

	bool "Enable Sharp SL-C700 (Corgi) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



config PCM990_DISPLAY_NONE

	bool "no display"

config MACH_SHEPHERD

	bool "Enable Sharp SL-C750 (Shepherd) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



endchoice

config MACH_HUSKY

	bool "Enable Sharp SL-C760 (Husky) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_SHARP_C7xx



config MACH_CSB726

	bool "Enable Cogent CSB726 System On a Module"

config MACH_AKITA

	bool "Enable Sharp SL-1000 (Akita) Support"

	depends on PXA_SHARPSL

	select PXA27x

	select IWMMXT

	help

	  Say Y here if you intend to run this kernel on a Cogent

	  CSB726 System On Module.

	select PXA_SHARP_Cxx00

	select MACH_SPITZ

	select I2C

	select I2C_PXA



config CSB726_CSB701

	bool "Enable supprot for CSB701 baseboard"

	depends on MACH_CSB726

config MACH_SPITZ

	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"

	depends on PXA_SHARPSL

	select PXA27x

	select PXA_SHARP_Cxx00



config PXA_EZX

	bool "Motorola EZX Platform"

config MACH_BORZOI

	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"

	depends on PXA_SHARPSL

	select PXA27x

	select IWMMXT

	select HAVE_PWM

	select PXA_SHARP_Cxx00



config MACH_TOSA

	bool "Enable Sharp SL-6000x (Tosa) Support"

	depends on PXA_SHARPSL

	select PXA25x

	select PXA_HAVE_BOARD_IRQS



config MACH_EZX_A780

	bool "Motorola EZX A780"

	default y

	depends on PXA_EZX

config ARCH_PXA_ESERIES

	bool "PXA based Toshiba e-series PDAs"

	select PXA25x

	select PXA_HAVE_BOARD_IRQS



config MACH_EZX_E680

	bool "Motorola EZX E680"

config MACH_E330

	bool "Toshiba e330"

	default y

	depends on PXA_EZX

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e330 family PDA.



config MACH_EZX_A1200

	bool "Motorola EZX A1200"

config MACH_E350

	bool "Toshiba e350"

	default y

	depends on PXA_EZX

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e350 family PDA.



config MACH_EZX_A910

	bool "Motorola EZX A910"

config MACH_E740

	bool "Toshiba e740"

	default y

	depends on PXA_EZX

	depends on ARCH_PXA_ESERIES

	select FB_W100

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e740 family PDA.



config MACH_EZX_E6

	bool "Motorola EZX E6"

config MACH_E750

	bool "Toshiba e750"

	default y

	depends on PXA_EZX

	depends on ARCH_PXA_ESERIES

	select FB_W100

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e750 family PDA.



config MACH_EZX_E2

	bool "Motorola EZX E2"

config MACH_E400

	bool "Toshiba e400"

	default y

	depends on PXA_EZX

	depends on ARCH_PXA_ESERIES

	help

	  Say Y here if you intend to run this kernel on a Toshiba

	  e400 family PDA.



config MACH_XCEP

	bool "Iskratel Electronics XCEP"

	select PXA25x

	select MTD

	select MTD_PARTITIONS

	select MTD_PHYSMAP

	select MTD_CFI_INTELEXT

	select MTD_CFI

	select MTD_CHAR

	select SMC91X

	select PXA_SSP

config MACH_E800

	bool "Toshiba e800"

	default y

	depends on ARCH_PXA_ESERIES

	select FB_W100

	help

	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.

	  Tuned for usage in Libera instruments for particle accelerators.

	  Say Y here if you intend to run this kernel on a Toshiba

	  e800 family PDA.



endmenu

arch/arm/mach-pxa/Makefile

+47 −46
Original line number Diff line number Diff line
@@ -24,33 +24,66 @@ obj-$(CONFIG_CPU_PXA300) += pxa300.o 
obj-$(CONFIG_CPU_PXA320)	+= pxa320.o

obj-$(CONFIG_CPU_PXA930)	+= pxa930.o



# Specific board support

obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o

obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o

obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o

# NOTE: keep the order of boards in accordance to their order in Kconfig



# Intel/Marvell Dev Platforms

obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o

obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o

obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o

obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o

obj-$(CONFIG_MACH_MP900C)	+= mp900.o

ifeq ($(CONFIG_MACH_ZYLONITE),y)

  obj-y				+= zylonite.o

  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o

  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o

endif

obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o

obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o

obj-$(CONFIG_MACH_SAAR)		+= saar.o



# 3rd Party Dev Platforms

obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o

obj-$(CONFIG_ARCH_VIPER)	+= viper.o

obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o

obj-$(CONFIG_MACH_CSB726)	+= csb726.o

obj-$(CONFIG_CSB726_CSB701)	+= csb701.o

obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o

ifeq ($(CONFIG_PCI),y)

obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o

endif

obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o

obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o

obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o

obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o

obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o

obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o

obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o

obj-$(CONFIG_MACH_XCEP)         += xcep.o

obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o

obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o

obj-$(CONFIG_MACH_PCM027)		+= pcm027.o

obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o

obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o

obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o

obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o



# End-user Products

obj-$(CONFIG_MACH_H4700)	+= hx4700.o

obj-$(CONFIG_MACH_H5000)	+= h5000.o

obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o

obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o

obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o

obj-$(CONFIG_PXA_EZX)           += ezx.o

obj-$(CONFIG_MACH_MP900C)	+= mp900.o

obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o

obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o

obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o

obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o

obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o

obj-$(CONFIG_MACH_PALMLD)	+= palmld.o

obj-$(CONFIG_PALM_TREO)		+= palmtreo.o

obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o

obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o

obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o

obj-$(CONFIG_MACH_POODLE)	+= poodle.o

obj-$(CONFIG_MACH_PCM027)	+= pcm027.o

obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o

obj-$(CONFIG_MACH_TOSA)		+= tosa.o

obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o

obj-$(CONFIG_MACH_H4700)	+= hx4700.o

obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o

obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o

obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o

obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o

obj-$(CONFIG_MACH_E330)		+= e330.o

obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +91,6 @@ obj-$(CONFIG_MACH_E740) += e740.o 
obj-$(CONFIG_MACH_E750)		+= e750.o

obj-$(CONFIG_MACH_E400)		+= e400.o

obj-$(CONFIG_MACH_E800)		+= e800.o

obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o

obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o

obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o

obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o

obj-$(CONFIG_MACH_PALMLD)	+= palmld.o

obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o

obj-$(CONFIG_PALM_TREO)		+= palmtreo.o

obj-$(CONFIG_ARCH_VIPER)	+= viper.o



ifeq ($(CONFIG_MACH_ZYLONITE),y)

  obj-y				+= zylonite.o

  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o

  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o

endif

obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o

obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o

obj-$(CONFIG_MACH_SAAR)		+= saar.o



obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o

obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o

obj-$(CONFIG_PXA_EZX)           += ezx.o



obj-$(CONFIG_MACH_XCEP)         += xcep.o



obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o

obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o

obj-$(CONFIG_MACH_CSB726)	+= csb726.o

obj-$(CONFIG_CSB726_CSB701)	+= csb701.o



# Support for blinky lights

led-y := leds.o
@@ -95,8 +100,4 @@ led-$(CONFIG_ARCH_PXA_IDP) += leds-idp.o 


obj-$(CONFIG_LEDS)		+= $(led-y)



ifeq ($(CONFIG_PCI),y)

obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o

endif



obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o