Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ce9c1a83 authored by Tony Lindgren's avatar Tony Lindgren Committed by Russell King
Browse files

[ARM] 3678/1: MMC: Make OMAP MMC work



Patch from Tony Lindgren

This patch makes OMAP MMC work again:

- Fix compile errors
- Do not ioremap base as it is already statically mapped
- Clean-up platform device handling
- Fix compile warnings

Signed-off-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 0d1bca16
Loading
Loading
Loading
Loading
+4 −4
Original line number Diff line number Diff line
@@ -162,8 +162,8 @@ static u64 mmc1_dmamask = 0xffffffff;

static struct resource mmc1_resources[] = {
	{
		.start		= IO_ADDRESS(OMAP_MMC1_BASE),
		.end		= IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
		.start		= OMAP_MMC1_BASE,
		.end		= OMAP_MMC1_BASE + 0x7f,
		.flags		= IORESOURCE_MEM,
	},
	{
@@ -191,8 +191,8 @@ static u64 mmc2_dmamask = 0xffffffff;

static struct resource mmc2_resources[] = {
	{
		.start		= IO_ADDRESS(OMAP_MMC2_BASE),
		.end		= IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
		.start		= OMAP_MMC2_BASE,
		.end		= OMAP_MMC2_BASE + 0x7f,
		.flags		= IORESOURCE_MEM,
	},
	{
+19 −22
Original line number Diff line number Diff line
@@ -61,6 +61,7 @@ struct mmc_omap_host {
	unsigned char		id; /* 16xx chips have 2 MMC blocks */
	struct clk *		iclk;
	struct clk *		fclk;
	struct resource		*res;
	void __iomem		*base;
	int			irq;
	unsigned char		bus_mode;
@@ -340,8 +341,6 @@ static void
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
	int n;
	void __iomem *reg;
	u16 *p;

	if (host->buffer_bytes_left == 0) {
		host->sg_idx++;
@@ -658,8 +657,8 @@ static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data)
	struct mmc_data *mmcdat = host->data;

	if (unlikely(host->dma_ch < 0)) {
		dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
				enabled\n");
		dev_err(mmc_dev(host->mmc),
			"DMA callback while DMA not enabled\n");
		return;
	}
	/* FIXME: We really should do something to _handle_ the errors */
@@ -973,20 +972,20 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
	struct omap_mmc_conf *minfo = pdev->dev.platform_data;
	struct mmc_host *mmc;
	struct mmc_omap_host *host = NULL;
	struct resource *r;
	int ret = 0;
	int irq;
	
	if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
			platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
		dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
		return -ENODEV;
	}
	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	irq = platform_get_irq(pdev, 0);
	if (!r || irq < 0)
		return -ENXIO;

	if (!request_mem_region(pdev->resource[0].start,
	r = request_mem_region(pdev->resource[0].start,
				pdev->resource[0].end - pdev->resource[0].start + 1,
				pdev->name)) {
		dev_dbg(&pdev->dev, "request_mem_region failed\n");
			       pdev->name);
	if (!r)
		return -EBUSY;
	}

	mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
	if (!mmc) {
@@ -1003,6 +1002,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
	host->dma_timer.data = (unsigned long) host;

	host->id = pdev->id;
	host->res = r;
	host->irq = irq;

	if (cpu_is_omap24xx()) {
		host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1032,11 +1033,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
	host->dma_ch = -1;

	host->irq = pdev->resource[1].start;
	host->base = ioremap(pdev->res.start, SZ_4K);
	if (!host->base) {
		ret = -ENOMEM;
		goto out;
	}
	host->base = (void __iomem*)IO_ADDRESS(r->start);

	if (minfo->wire4)
		 mmc->caps |= MMC_CAP_4_BIT_DATA;
@@ -1057,8 +1054,8 @@ static int __init mmc_omap_probe(struct platform_device *pdev)

	if (host->power_pin >= 0) {
		if ((ret = omap_request_gpio(host->power_pin)) != 0) {
			dev_err(mmc_dev(host->mmc), "Unable to get GPIO
					pin for MMC power\n");
			dev_err(mmc_dev(host->mmc),
				"Unable to get GPIO pin for MMC power\n");
			goto out;
		}
		omap_set_gpio_direction(host->power_pin, 0);
@@ -1100,7 +1097,7 @@ static int __init mmc_omap_probe(struct platform_device *pdev)
				device_remove_file(&pdev->dev, &dev_attr_cover_switch);
		}
		if (ret) {
			dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
			dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
			free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
			omap_free_gpio(host->switch_pin);
			host->switch_pin = -1;