Merge "ARM: dts: msm: Add lt8912 1080p panel support for msm8953 IPC platform" (ccc5d0ca) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/dsi-panel-lt8912-1080p-video.dtsi

0 → 100644

+69 −0

Original line number	Diff line number	Diff line
		/* Copyright (c) 2015-2017, The Linux Foundation. All rights reserved.
		*
		* This program is free software; you can redistribute it and/or modify
		* it under the terms of the GNU General Public License version 2 and
		* only version 2 as published by the Free Software Foundation.
		*
		* This program is distributed in the hope that it will be useful,
		* but WITHOUT ANY WARRANTY; without even the implied warranty of
		* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		* GNU General Public License for more details.
		*/

		&mdss_mdp {
		dsi_lt8912_1080_vid: qcom,mdss_dsi_lt8912_1080p_video {
		qcom,mdss-dsi-panel-name = "lt8912 1080p video mode dsi panel";
		qcom,mdss-dsi-panel-type = "dsi_video_mode";
		qcom,mdss-dsi-panel-destination = "display_1";
		qcom,mdss-dsi-color-order = "rgb_swap_rgb";
		qcom,mdss-dsi-lane-map = "lane_map_0123";
		qcom,mdss-dsi-panel-framerate = <60>;
		qcom,mdss-dsi-virtual-channel-id = <0>;
		qcom,mdss-dsi-stream = <0>;
		qcom,mdss-dsi-panel-width = <1920>;
		qcom,mdss-dsi-panel-height = <1080>;
		qcom,mdss-dsi-h-front-porch = <88>;
		qcom,mdss-dsi-h-back-porch = <148>;
		qcom,mdss-dsi-h-pulse-width = <44>;
		qcom,mdss-dsi-h-sync-skew = <0>;
		qcom,mdss-dsi-v-back-porch = <36>;
		qcom,mdss-dsi-v-front-porch = <4>;
		qcom,mdss-dsi-v-pulse-width = <5>;
		qcom,mdss-dsi-h-left-border = <0>;
		qcom,mdss-dsi-h-right-border = <0>;
		qcom,mdss-dsi-v-top-border = <0>;
		qcom,mdss-dsi-v-bottom-border = <0>;
		qcom,mdss-dsi-bpp = <24>;
		qcom,mdss-dsi-underflow-color = <0xff>;
		qcom,mdss-dsi-border-color = <0>;
		qcom,mdss-dsi-on-command = [
		05 01 00 00 a0 00 02 11 00
		05 01 00 00 a0 00 02 29 00];
		qcom,mdss-dsi-off-command = [
		05 01 00 00 78 00 02 28 00
		05 01 00 00 78 00 02 10 00];
		qcom,mdss-dsi-on-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-off-command-state = "dsi_lp_mode";
		qcom,mdss-dsi-h-sync-pulse = <0>;
		qcom,mdss-dsi-traffic-mode = "non_burst_sync_event";
		qcom,mdss-dsi-bllp-eof-power-mode;
		qcom,mdss-dsi-bllp-power-mode;
		qcom,mdss-dsi-lane-0-state;
		qcom,mdss-dsi-lane-1-state;
		qcom,mdss-dsi-panel-timings-phy-v2 = [
		23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1a 08 09 05 03 04 a0];
		qcom,mdss-dsi-panel-timings = [
		e6 38 26 00 68 6c 2a 3a 2c 03 04 00];
		qcom,mdss-dsi-t-clk-post = <0x02>;
		qcom,mdss-dsi-t-clk-pre = <0x2b>;
		qcom,mdss-dsi-dma-trigger = "trigger_sw";
		qcom,mdss-dsi-mdp-trigger = "none";
		qcom,mdss-dsi-reset-sequence = <1 20>, <0 2>, <1 20>;
		qcom,mdss-dsi-post-init-delay = <1>;
		qcom,mdss-dsi-force-clock-lane-hs;
		};
		};

arch/arm/boot/dts/qcom/msm8953-ipc.dtsi

+36 −3

Original line number	Diff line number	Diff line
		@@ -119,6 +119,29 @@
		qcom,disable-device-mode;
		qcom,gpio-mode-sel = <&tlmm 61 0>;
		};

		dsi_panel_lt_pwr_supply: dsi_panel_lt_pwr_supply {
		#address-cells = <1>;
		#size-cells = <0>;

		qcom,panel-supply-entry@0 {
		reg = <0>;
		qcom,supply-name = "vdd";
		qcom,supply-min-voltage = <2850000>;
		qcom,supply-max-voltage = <2850000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};

		qcom,panel-supply-entry@1 {
		reg = <1>;
		qcom,supply-name = "vddio";
		qcom,supply-min-voltage = <1800000>;
		qcom,supply-max-voltage = <1800000>;
		qcom,supply-enable-load = <100000>;
		qcom,supply-disable-load = <100>;
		};
		};
		};

		&spmi_bus {
		@@ -159,8 +182,14 @@
		};
		};

		&dsi_lt8912_480_vid {
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		&dsi_lt8912_1080_vid {
		qcom,mdss-dsi-panel-timings-phy-v2 = [23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1e 08 09 05 03 04 a0
		23 1a 08 09 05 03 04 a0];

		qcom,panel-supply-entries = <&dsi_panel_lt_pwr_supply>;
		};

		&mdss_mdp {
		@@ -172,11 +201,13 @@
		};

		&mdss_dsi0 {
		qcom,dsi-pref-prim-pan = <&dsi_lt8912_480_vid>;
		qcom,dsi-pref-prim-pan = <&dsi_lt8912_1080_vid>;
		pinctrl-names = "mdss_default", "mdss_sleep";
		pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;
		pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;

		qcom,pluggable;

		qcom,platform-te-gpio = <&tlmm 24 0>;
		qcom,platform-bklight-en-gpio = <&tlmm 59 0>;
		};
		@@ -199,12 +230,14 @@
		};

		&dsi_truly_1080_vid {
		status = "disabled";
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,mdss-dsi-pan-enable-dynamic-fps;
		qcom,mdss-dsi-pan-fps-update = "dfps_immediate_clk_mode";
		};

		&dsi_truly_1080_cmd {
		status = "disabled";
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,ulps-enabled;
		qcom,partial-update-enabled;

arch/arm/boot/dts/qcom/msm8953-mdss-panels.dtsi

+1 −0

Original line number	Diff line number	Diff line
		@@ -22,6 +22,7 @@
		#include "dsi-panel-r69006-1080p-cmd.dtsi"
		#include "dsi-panel-truly-wuxga-video.dtsi"
		#include "dsi-panel-lt8912-480p-video.dtsi"
		#include "dsi-panel-lt8912-1080p-video.dtsi"

		&soc {
		dsi_panel_pwr_supply: dsi_panel_pwr_supply {