ALSA: hda - add support for "Maxdata Favorit 100XS" (Intel HDA/ALC260) (cc959489) · Commits · e / devices / android_kernel_xiaomi_markw

sound/pci/hda/patch_realtek.c

+130 −0

Original line number	Diff line number	Diff line
		@@ -78,6 +78,7 @@ enum {
		ALC260_ACER,
		ALC260_WILL,
		ALC260_REPLACER_672V,
		ALC260_FAVORIT100,
		#ifdef CONFIG_SND_DEBUG
		ALC260_TEST,
		#endif
		@@ -4537,6 +4538,26 @@ static struct hda_input_mux alc260_acer_capture_sources[2] = {
		},
		},
		};

		/* Maxdata Favorit 100XS */
		static struct hda_input_mux alc260_favorit100_capture_sources[2] = {
		{
		.num_items = 2,
		.items = {
		{ "Line/Mic", 0x0 },
		{ "CD", 0x4 },
		},
		},
		{
		.num_items = 3,
		.items = {
		{ "Line/Mic", 0x0 },
		{ "CD", 0x4 },
		{ "Mixer", 0x5 },
		},
		},
		};

		/*
		* This is just place-holder, so there's something for alc_build_pcms to look
		* at when it calculates the maximum number of channels. ALC260 has no mixer
		@@ -4817,6 +4838,18 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = {
		{ } /* end */
		};

		/* Maxdata Favorit 100XS: one output and one input (0x12) jack
		*/
		static struct snd_kcontrol_new alc260_favorit100_mixer[] = {
		HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT),
		HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT),
		ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT),
		HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT),
		HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT),
		ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN),
		{ } /* end */
		};

		/* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12,
		* Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17.
		*/
		@@ -5188,6 +5221,89 @@ static struct hda_verb alc260_acer_init_verbs[] = {
		{ }
		};

		/* Initialisation sequence for Maxdata Favorit 100XS
		* (adapted from Acer init verbs).
		*/
		static struct hda_verb alc260_favorit100_init_verbs[] = {
		/* GPIO 0 enables the output jack.
		* Turn this on and rely on the standard mute
		* methods whenever the user wants to turn these outputs off.
		*/
		{0x01, AC_VERB_SET_GPIO_MASK, 0x01},
		{0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01},
		{0x01, AC_VERB_SET_GPIO_DATA, 0x01},
		/* Line/Mic input jack is connected to Mic1 pin */
		{0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50},
		/* Ensure all other unused pins are disabled and muted. */
		{0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
		{0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
		{0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
		{0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
		{0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0},
		{0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		/* Disable digital (SPDIF) pins */
		{0x03, AC_VERB_SET_DIGI_CONVERT_1, 0},
		{0x06, AC_VERB_SET_DIGI_CONVERT_1, 0},

		/* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum
		* bus when acting as outputs.
		*/
		{0x0b, AC_VERB_SET_CONNECT_SEL, 0},
		{0x0d, AC_VERB_SET_CONNECT_SEL, 0},

		/* Start with output sum widgets muted and their output gains at min */
		{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
		{0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
		{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
		{0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},
		{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)},
		{0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO},

		/* Unmute Line-out pin widget amp left and right
		* (no equiv mixer ctrl)
		*/
		{0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
		/* Unmute Mic1 and Line1 pin widget input buffers since they start as
		* inputs. If the pin mode is changed by the user the pin mode control
		* will take care of enabling the pin's input/output buffers as needed.
		* Therefore there's no need to enable the input buffer at this
		* stage.
		*/
		{0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},

		/* Mute capture amp left and right */
		{0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		/* Set ADC connection select to match default mixer setting - mic
		* (on mic1 pin)
		*/
		{0x04, AC_VERB_SET_CONNECT_SEL, 0x00},

		/* Do similar with the second ADC: mute capture input amp and
		* set ADC connection to mic to match ALSA's default state.
		*/
		{0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)},
		{0x05, AC_VERB_SET_CONNECT_SEL, 0x00},

		/* Mute all inputs to mixer widget (even unconnected ones) */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */
		{0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */

		{ }
		};

		static struct hda_verb alc260_will_verbs[] = {
		{0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
		{0x0b, AC_VERB_SET_CONNECT_SEL, 0x00},
		@@ -5730,6 +5846,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = {
		[ALC260_ACER] = "acer",
		[ALC260_WILL] = "will",
		[ALC260_REPLACER_672V] = "replacer",
		[ALC260_FAVORIT100] = "favorit100",
		#ifdef CONFIG_SND_DEBUG
		[ALC260_TEST] = "test",
		#endif
		@@ -5739,6 +5856,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = {
		static struct snd_pci_quirk alc260_cfg_tbl[] = {
		SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER),
		SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER),
		SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100),
		SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013),
		SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013),
		SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013),
		@@ -5840,6 +5958,18 @@ static struct alc_config_preset alc260_presets[] = {
		.num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources),
		.input_mux = alc260_acer_capture_sources,
		},
		[ALC260_FAVORIT100] = {
		.mixers = { alc260_favorit100_mixer },
		.init_verbs = { alc260_favorit100_init_verbs },
		.num_dacs = ARRAY_SIZE(alc260_dac_nids),
		.dac_nids = alc260_dac_nids,
		.num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids),
		.adc_nids = alc260_dual_adc_nids,
		.num_channel_mode = ARRAY_SIZE(alc260_modes),
		.channel_mode = alc260_modes,
		.num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources),
		.input_mux = alc260_favorit100_capture_sources,
		},
		[ALC260_WILL] = {
		.mixers = { alc260_will_mixer },
		.init_verbs = { alc260_init_verbs, alc260_will_verbs },