Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit c6d9deda authored by Seungwon Jeon's avatar Seungwon Jeon Committed by Chris Ball
Browse files

mmc: dw_mmc: exynos: adjust the clock rate with speed mode 



Exynos's host has divider logic before 'cclk_in' to controller core.
It means that actual clock rate of ciu clock comes from this divider
value. So, source clock should be adjusted along with 'ciu_div' which
indicates the host's divider ratio. Setting clock rate basically fits
the required speed. Specially, 'cclk_in' should have double rate of
target speed in case of DDR 8-bit mode.

Signed-off-by: default avatarSeungwon Jeon <tgih.jun@samsung.com>
Tested-by: default avatarAlim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: default avatarChris Ball <cjb@laptop.org>
parent c537a1c5

drivers/mmc/host/dw_mmc-exynos.c

+42 −13
Original line number Diff line number Diff line
@@ -56,6 +56,8 @@ 
#define DWMCI_MPSCTRL_ENCRYPTION		BIT(1)

#define DWMCI_MPSCTRL_VALID			BIT(0)



#define EXYNOS_CCLKIN_MIN	50000000	/* unit: HZ */



/* Variations in Exynos specific dw-mshc controller */

enum dw_mci_exynos_type {

	DW_MCI_TYPE_EXYNOS4210,
@@ -71,6 +73,7 @@ struct dw_mci_exynos_priv_data { 
	u8				ciu_div;

	u32				sdr_timing;

	u32				ddr_timing;

	u32				cur_speed;

};



static struct dw_mci_exynos_compatible {
@@ -114,16 +117,9 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host) 
static int dw_mci_exynos_setup_clock(struct dw_mci *host)

{

	struct dw_mci_exynos_priv_data *priv = host->priv;

	unsigned long rate = clk_get_rate(host->ciu_clk);



	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5250 ||

	    priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420 ||

	    priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU)

		host->bus_hz /= (priv->ciu_div + 1);

	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)

		host->bus_hz /= EXYNOS4412_FIXED_CIU_CLK_DIV;

	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)

		host->bus_hz /= EXYNOS4210_FIXED_CIU_CLK_DIV;



	host->bus_hz = rate / (priv->ciu_div + 1);

	return 0;

}
@@ -187,13 +183,40 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr) 
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)

{

	struct dw_mci_exynos_priv_data *priv = host->priv;

	unsigned int wanted = ios->clock;

	unsigned long actual;

	u8 div = priv->ciu_div + 1;



	if (ios->timing == MMC_TIMING_UHS_DDR50)

	if (ios->timing == MMC_TIMING_UHS_DDR50) {

		mci_writel(host, CLKSEL, priv->ddr_timing);

	else

		/* Should be double rate for DDR mode */

		if (ios->bus_width == MMC_BUS_WIDTH_8)

			wanted <<= 1;

	} else {

		mci_writel(host, CLKSEL, priv->sdr_timing);

	}



	/* Don't care if wanted clock is zero */

	if (!wanted)

		return;



	/* Guaranteed minimum frequency for cclkin */

	if (wanted < EXYNOS_CCLKIN_MIN)

		wanted = EXYNOS_CCLKIN_MIN;



	if (wanted != priv->cur_speed) {

		int ret = clk_set_rate(host->ciu_clk, wanted * div);

		if (ret)

			dev_warn(host->dev,

				"failed to set clk-rate %u error: %d\n",

				 wanted * div, ret);

		actual = clk_get_rate(host->ciu_clk);

		host->bus_hz = actual / div;

		priv->cur_speed = wanted;

		host->current_speed = 0;

	}

}



static int dw_mci_exynos_parse_dt(struct dw_mci *host)

{

	struct dw_mci_exynos_priv_data *priv;
@@ -214,8 +237,14 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host) 
			priv->ctrl_type = exynos_compat[idx].ctrl_type;

	}



	if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4412)

		priv->ciu_div = EXYNOS4412_FIXED_CIU_CLK_DIV - 1;

	else if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS4210)

		priv->ciu_div = EXYNOS4210_FIXED_CIU_CLK_DIV - 1;

	else {

		of_property_read_u32(np, "samsung,dw-mshc-ciu-div", &div);

		priv->ciu_div = div;

	}



	ret = of_property_read_u32_array(np,

			"samsung,dw-mshc-sdr-timing", timing, 2);