Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit bada1c5b authored by Olof Johansson's avatar Olof Johansson
Browse files

Merge branches 'msm/fixes-non-critical' and 'msm/cleanup' into next/dt 



Merging in fixes and cleanup as prereqs to simplify merge conflicts.

* msm/fixes-non-critical:
  ARM: msm: Fix early debug uart mapping on some memory configs
  ARM: msm: io: Change the default static iomappings to be shared
  ARM: msm: io: Remove 7x30 iomap region from 7x00
  ARM: msm: Remove call to missing FPGA init on 8660

* msm/cleanup:
  ARM: msm: Remove uncompiled board-msm7x27
  ARM: msm: Remove unused acpuclock-arm11
  ARM: msm: dma: use list_move_tail instead of list_del/list_add_tail
  ARM: msm: Fix sparse warnings due to incorrect type
  ARM: msm: Remove unused idle.c
  ARM: msm: clock-pcom: Mark functions static
  ARM: msm: Remove msm_hw_reset_hook

Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 73f5ae31 10717e04 e63770ac

arch/arm/mach-msm/Makefile

+2 −2
Original line number Diff line number Diff line 
obj-y += io.o idle.o timer.o

obj-y += io.o timer.o

obj-y += clock.o

obj-$(CONFIG_DEBUG_FS) += clock-debug.o



obj-$(CONFIG_MSM_VIC) += irq-vic.o

obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o



obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o

obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o

obj-$(CONFIG_ARCH_MSM7X30) += dma.o

obj-$(CONFIG_ARCH_QSD8X50) += dma.o sirc.o

arch/arm/mach-msm/acpuclock-arm11.c

deleted100644 → 0
+0 −525
Original line number Diff line number Diff line 
/* arch/arm/mach-msm/acpuclock.c

 *

 * MSM architecture clock driver

 *

 * Copyright (C) 2007 Google, Inc.

 * Copyright (c) 2007 QUALCOMM Incorporated

 * Author: San Mehat <san@android.com>

 *

 * This software is licensed under the terms of the GNU General Public

 * License version 2, as published by the Free Software Foundation, and

 * may be copied, distributed, and modified under those terms.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the

 * GNU General Public License for more details.

 *

 */



#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/list.h>

#include <linux/errno.h>

#include <linux/string.h>

#include <linux/delay.h>

#include <linux/clk.h>

#include <linux/cpufreq.h>

#include <linux/mutex.h>

#include <linux/io.h>

#include <mach/board.h>

#include <mach/msm_iomap.h>



#include "proc_comm.h"

#include "acpuclock.h"





#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100)

#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104)

#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124)



/*

 * ARM11 clock configuration for specific ACPU speeds

 */



#define ACPU_PLL_TCXO	-1

#define ACPU_PLL_0	0

#define ACPU_PLL_1	1

#define ACPU_PLL_2	2

#define ACPU_PLL_3	3



#define PERF_SWITCH_DEBUG 0

#define PERF_SWITCH_STEP_DEBUG 0



struct clock_state

{

	struct clkctl_acpu_speed	*current_speed;

	struct mutex			lock;

	uint32_t			acpu_switch_time_us;

	uint32_t			max_speed_delta_khz;

	uint32_t			vdd_switch_time_us;

	unsigned long			power_collapse_khz;

	unsigned long			wait_for_irq_khz;

};



static struct clk *ebi1_clk;

static struct clock_state drv_state = { 0 };



static void __init acpuclk_init(void);



/* MSM7201A Levels 3-6 all correspond to 1.2V, level 7 corresponds to 1.325V. */

enum {

	VDD_0 = 0,

	VDD_1 = 1,

	VDD_2 = 2,

	VDD_3 = 3,

	VDD_4 = 3,

	VDD_5 = 3,

	VDD_6 = 3,

	VDD_7 = 7,

	VDD_END

};



struct clkctl_acpu_speed {

	unsigned int	a11clk_khz;

	int		pll;

	unsigned int	a11clk_src_sel;

	unsigned int	a11clk_src_div;

	unsigned int	ahbclk_khz;

	unsigned int	ahbclk_div;

	int		vdd;

	unsigned int 	axiclk_khz;

	unsigned long	lpj; /* loops_per_jiffy */

/* Index in acpu_freq_tbl[] for steppings. */

	short		down;

	short		up;

};



/*

 * ACPU speed table. Complete table is shown but certain speeds are commented

 * out to optimized speed switching. Initialize loops_per_jiffy to 0.

 *

 * Table stepping up/down is optimized for 256mhz jumps while staying on the

 * same PLL.

 */

#if (0)

static struct clkctl_acpu_speed  acpu_freq_tbl[] = {

	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 8 },

	{ 61440, ACPU_PLL_0,  4, 3, 61440,  0, VDD_0, 30720,  0, 0, 8 },

	{ 81920, ACPU_PLL_0,  4, 2, 40960,  1, VDD_0, 61440,  0, 0, 8 },

	{ 96000, ACPU_PLL_1,  1, 7, 48000,  1, VDD_0, 61440,  0, 0, 9 },

	{ 122880, ACPU_PLL_0, 4, 1, 61440,  1, VDD_3, 61440,  0, 0, 8 },

	{ 128000, ACPU_PLL_1, 1, 5, 64000,  1, VDD_3, 61440,  0, 0, 12 },

	{ 176000, ACPU_PLL_2, 2, 5, 88000,  1, VDD_3, 61440,  0, 0, 11 },

	{ 192000, ACPU_PLL_1, 1, 3, 64000,  2, VDD_3, 61440,  0, 0, 12 },

	{ 245760, ACPU_PLL_0, 4, 0, 81920,  2, VDD_4, 61440,  0, 0, 12 },

	{ 256000, ACPU_PLL_1, 1, 2, 128000, 2, VDD_5, 128000, 0, 0, 12 },

	{ 264000, ACPU_PLL_2, 2, 3, 88000,  2, VDD_5, 128000, 0, 6, 13 },

	{ 352000, ACPU_PLL_2, 2, 2, 88000,  3, VDD_5, 128000, 0, 6, 13 },

	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 5, -1 },

	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 11, -1 },

	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },

};

#else /* Table of freq we currently use. */

static struct clkctl_acpu_speed  acpu_freq_tbl[] = {

	{ 19200, ACPU_PLL_TCXO, 0, 0, 19200, 0, VDD_0, 30720, 0, 0, 4 },

	{ 122880, ACPU_PLL_0, 4, 1, 61440, 1, VDD_3, 61440, 0, 0, 4 },

	{ 128000, ACPU_PLL_1, 1, 5, 64000, 1, VDD_3, 61440, 0, 0, 6 },

	{ 176000, ACPU_PLL_2, 2, 5, 88000, 1, VDD_3, 61440, 0, 0, 5 },

	{ 245760, ACPU_PLL_0, 4, 0, 81920, 2, VDD_4, 61440, 0, 0, 5 },

	{ 352000, ACPU_PLL_2, 2, 2, 88000, 3, VDD_5, 128000, 0, 3, 7 },

	{ 384000, ACPU_PLL_1, 1, 1, 128000, 2, VDD_6, 128000, 0, 2, -1 },

	{ 528000, ACPU_PLL_2, 2, 1, 132000, 3, VDD_7, 128000, 0, 5, -1 },

	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 },

};

#endif





#ifdef CONFIG_CPU_FREQ_TABLE

static struct cpufreq_frequency_table freq_table[] = {

	{ 0, 122880 },

	{ 1, 128000 },

	{ 2, 245760 },

	{ 3, 384000 },

	{ 4, 528000 },

	{ 5, CPUFREQ_TABLE_END },

};

#endif



static int pc_pll_request(unsigned id, unsigned on)

{

	int res;

	on = !!on;



#if PERF_SWITCH_DEBUG

	if (on)

		printk(KERN_DEBUG "Enabling PLL %d\n", id);

	else

		printk(KERN_DEBUG "Disabling PLL %d\n", id);

#endif



	res = msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on);

	if (res < 0)

		return res;



#if PERF_SWITCH_DEBUG

	if (on)

		printk(KERN_DEBUG "PLL %d enabled\n", id);

	else

		printk(KERN_DEBUG "PLL %d disabled\n", id);

#endif

	return res;

}





/*----------------------------------------------------------------------------

 * ARM11 'owned' clock control

 *---------------------------------------------------------------------------*/



unsigned long acpuclk_power_collapse(void) {

	int ret = acpuclk_get_rate();

	ret *= 1000;

	if (ret > drv_state.power_collapse_khz)

		acpuclk_set_rate(drv_state.power_collapse_khz, 1);

	return ret;

}



unsigned long acpuclk_get_wfi_rate(void)

{

	return drv_state.wait_for_irq_khz;

}



unsigned long acpuclk_wait_for_irq(void) {

	int ret = acpuclk_get_rate();

	ret *= 1000;

	if (ret > drv_state.wait_for_irq_khz)

		acpuclk_set_rate(drv_state.wait_for_irq_khz, 1);

	return ret;

}



static int acpuclk_set_vdd_level(int vdd)

{

	uint32_t current_vdd;



	current_vdd = readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x07;



#if PERF_SWITCH_DEBUG

	printk(KERN_DEBUG "acpuclock: Switching VDD from %u -> %d\n",

	       current_vdd, vdd);

#endif

	writel((1 << 7) | (vdd << 3), A11S_VDD_SVS_PLEVEL_ADDR);

	udelay(drv_state.vdd_switch_time_us);

	if ((readl(A11S_VDD_SVS_PLEVEL_ADDR) & 0x7) != vdd) {

#if PERF_SWITCH_DEBUG

		printk(KERN_ERR "acpuclock: VDD set failed\n");

#endif

		return -EIO;

	}



#if PERF_SWITCH_DEBUG

	printk(KERN_DEBUG "acpuclock: VDD switched\n");

#endif

	return 0;

}



/* Set proper dividers for the given clock speed. */

static void acpuclk_set_div(const struct clkctl_acpu_speed *hunt_s) {

	uint32_t reg_clkctl, reg_clksel, clk_div;



	/* AHB_CLK_DIV */

	clk_div = (readl(A11S_CLK_SEL_ADDR) >> 1) & 0x03;

	/*

	 * If the new clock divider is higher than the previous, then

	 * program the divider before switching the clock

	 */

	if (hunt_s->ahbclk_div > clk_div) {

		reg_clksel = readl(A11S_CLK_SEL_ADDR);

		reg_clksel &= ~(0x3 << 1);

		reg_clksel |= (hunt_s->ahbclk_div << 1);

		writel(reg_clksel, A11S_CLK_SEL_ADDR);

	}

	if ((readl(A11S_CLK_SEL_ADDR) & 0x01) == 0) {

		/* SRC0 */



		/* Program clock source */

		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);

		reg_clkctl &= ~(0x07 << 4);

		reg_clkctl |= (hunt_s->a11clk_src_sel << 4);

		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);



		/* Program clock divider */

		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);

		reg_clkctl &= ~0xf;

		reg_clkctl |= hunt_s->a11clk_src_div;

		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);



		/* Program clock source selection */

		reg_clksel = readl(A11S_CLK_SEL_ADDR);

		reg_clksel |= 1; /* CLK_SEL_SRC1NO  == SRC1 */

		writel(reg_clksel, A11S_CLK_SEL_ADDR);

	} else {

		/* SRC1 */



		/* Program clock source */

		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);

		reg_clkctl &= ~(0x07 << 12);

		reg_clkctl |= (hunt_s->a11clk_src_sel << 12);

		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);



		/* Program clock divider */

		reg_clkctl = readl(A11S_CLK_CNTL_ADDR);

		reg_clkctl &= ~(0xf << 8);

		reg_clkctl |= (hunt_s->a11clk_src_div << 8);

		writel(reg_clkctl, A11S_CLK_CNTL_ADDR);



		/* Program clock source selection */

		reg_clksel = readl(A11S_CLK_SEL_ADDR);

		reg_clksel &= ~1; /* CLK_SEL_SRC1NO  == SRC0 */

		writel(reg_clksel, A11S_CLK_SEL_ADDR);

	}



	/*

	 * If the new clock divider is lower than the previous, then

	 * program the divider after switching the clock

	 */

	if (hunt_s->ahbclk_div < clk_div) {

		reg_clksel = readl(A11S_CLK_SEL_ADDR);

		reg_clksel &= ~(0x3 << 1);

		reg_clksel |= (hunt_s->ahbclk_div << 1);

		writel(reg_clksel, A11S_CLK_SEL_ADDR);

	}

}



int acpuclk_set_rate(unsigned long rate, int for_power_collapse)

{

	uint32_t reg_clkctl;

	struct clkctl_acpu_speed *cur_s, *tgt_s, *strt_s;

	int rc = 0;

	unsigned int plls_enabled = 0, pll;



	strt_s = cur_s = drv_state.current_speed;



	WARN_ONCE(cur_s == NULL, "acpuclk_set_rate: not initialized\n");

	if (cur_s == NULL)

		return -ENOENT;



	if (rate == (cur_s->a11clk_khz * 1000))

		return 0;



	for (tgt_s = acpu_freq_tbl; tgt_s->a11clk_khz != 0; tgt_s++) {

		if (tgt_s->a11clk_khz == (rate / 1000))

			break;

	}



	if (tgt_s->a11clk_khz == 0)

		return -EINVAL;



	/* Choose the highest speed speed at or below 'rate' with same PLL. */

	if (for_power_collapse && tgt_s->a11clk_khz < cur_s->a11clk_khz) {

		while (tgt_s->pll != ACPU_PLL_TCXO && tgt_s->pll != cur_s->pll)

			tgt_s--;

	}



	if (strt_s->pll != ACPU_PLL_TCXO)

		plls_enabled |= 1 << strt_s->pll;



	if (!for_power_collapse) {

		mutex_lock(&drv_state.lock);

		if (strt_s->pll != tgt_s->pll && tgt_s->pll != ACPU_PLL_TCXO) {

			rc = pc_pll_request(tgt_s->pll, 1);

			if (rc < 0) {

				pr_err("PLL%d enable failed (%d)\n",

					tgt_s->pll, rc);

				goto out;

			}

			plls_enabled |= 1 << tgt_s->pll;

		}

		/* Increase VDD if needed. */

		if (tgt_s->vdd > cur_s->vdd) {

			if ((rc = acpuclk_set_vdd_level(tgt_s->vdd)) < 0) {

				printk(KERN_ERR "Unable to switch ACPU vdd\n");

				goto out;

			}

		}

	}



	/* Set wait states for CPU between frequency changes */

	reg_clkctl = readl(A11S_CLK_CNTL_ADDR);

	reg_clkctl |= (100 << 16); /* set WT_ST_CNT */

	writel(reg_clkctl, A11S_CLK_CNTL_ADDR);



#if PERF_SWITCH_DEBUG

	printk(KERN_INFO "acpuclock: Switching from ACPU rate %u -> %u\n",

	       strt_s->a11clk_khz * 1000, tgt_s->a11clk_khz * 1000);

#endif



	while (cur_s != tgt_s) {

		/*

		 * Always jump to target freq if within 256mhz, regulardless of

		 * PLL. If differnece is greater, use the predefinied

		 * steppings in the table.

		 */

		int d = abs((int)(cur_s->a11clk_khz - tgt_s->a11clk_khz));

		if (d > drv_state.max_speed_delta_khz) {

			/* Step up or down depending on target vs current. */

			int clk_index = tgt_s->a11clk_khz > cur_s->a11clk_khz ?

				cur_s->up : cur_s->down;

			if (clk_index < 0) { /* This should not happen. */

				printk(KERN_ERR "cur:%u target: %u\n",

					cur_s->a11clk_khz, tgt_s->a11clk_khz);

				rc = -EINVAL;

				goto out;

			}

			cur_s = &acpu_freq_tbl[clk_index];

		} else {

			cur_s = tgt_s;

		}

#if PERF_SWITCH_STEP_DEBUG

		printk(KERN_DEBUG "%s: STEP khz = %u, pll = %d\n",

			__FUNCTION__, cur_s->a11clk_khz, cur_s->pll);

#endif

		if (!for_power_collapse&& cur_s->pll != ACPU_PLL_TCXO

		    && !(plls_enabled & (1 << cur_s->pll))) {

			rc = pc_pll_request(cur_s->pll, 1);

			if (rc < 0) {

				pr_err("PLL%d enable failed (%d)\n",

					cur_s->pll, rc);

				goto out;

			}

			plls_enabled |= 1 << cur_s->pll;

		}



		acpuclk_set_div(cur_s);

		drv_state.current_speed = cur_s;

		/* Re-adjust lpj for the new clock speed. */

		loops_per_jiffy = cur_s->lpj;

		udelay(drv_state.acpu_switch_time_us);

	}



	/* Nothing else to do for power collapse. */

	if (for_power_collapse)

		return 0;



	/* Disable PLLs we are not using anymore. */

	plls_enabled &= ~(1 << tgt_s->pll);

	for (pll = ACPU_PLL_0; pll <= ACPU_PLL_2; pll++)

		if (plls_enabled & (1 << pll)) {

			rc = pc_pll_request(pll, 0);

			if (rc < 0) {

				pr_err("PLL%d disable failed (%d)\n", pll, rc);

				goto out;

			}

		}



	/* Change the AXI bus frequency if we can. */

	if (strt_s->axiclk_khz != tgt_s->axiclk_khz) {

		rc = clk_set_rate(ebi1_clk, tgt_s->axiclk_khz * 1000);

		if (rc < 0)

			pr_err("Setting AXI min rate failed!\n");

	}



	/* Drop VDD level if we can. */

	if (tgt_s->vdd < strt_s->vdd) {

		if (acpuclk_set_vdd_level(tgt_s->vdd) < 0)

			printk(KERN_ERR "acpuclock: Unable to drop ACPU vdd\n");

	}



#if PERF_SWITCH_DEBUG

	printk(KERN_DEBUG "%s: ACPU speed change complete\n", __FUNCTION__);

#endif

out:

	if (!for_power_collapse)

		mutex_unlock(&drv_state.lock);

	return rc;

}



static void __init acpuclk_init(void)

{

	struct clkctl_acpu_speed *speed;

	uint32_t div, sel;

	int rc;



	/*

	 * Determine the rate of ACPU clock

	 */



	if (!(readl(A11S_CLK_SEL_ADDR) & 0x01)) { /* CLK_SEL_SRC1N0 */

		/* CLK_SRC0_SEL */

		sel = (readl(A11S_CLK_CNTL_ADDR) >> 12) & 0x7;

		/* CLK_SRC0_DIV */

		div = (readl(A11S_CLK_CNTL_ADDR) >> 8) & 0x0f;

	} else {

		/* CLK_SRC1_SEL */

		sel = (readl(A11S_CLK_CNTL_ADDR) >> 4) & 0x07;

		/* CLK_SRC1_DIV */

		div = readl(A11S_CLK_CNTL_ADDR) & 0x0f;

	}



	for (speed = acpu_freq_tbl; speed->a11clk_khz != 0; speed++) {

		if (speed->a11clk_src_sel == sel

		 && (speed->a11clk_src_div == div))

			break;

	}

	if (speed->a11clk_khz == 0) {

		printk(KERN_WARNING "Warning - ACPU clock reports invalid speed\n");

		return;

	}



	drv_state.current_speed = speed;



	rc = clk_set_rate(ebi1_clk, speed->axiclk_khz * 1000);

	if (rc < 0)

		pr_err("Setting AXI min rate failed!\n");



	printk(KERN_INFO "ACPU running at %d KHz\n", speed->a11clk_khz);

}



unsigned long acpuclk_get_rate(void)

{

	WARN_ONCE(drv_state.current_speed == NULL,

		  "acpuclk_get_rate: not initialized\n");

	if (drv_state.current_speed)

		return drv_state.current_speed->a11clk_khz;

	else

		return 0;

}



uint32_t acpuclk_get_switch_time(void)

{

	return drv_state.acpu_switch_time_us;

}



/*----------------------------------------------------------------------------

 * Clock driver initialization

 *---------------------------------------------------------------------------*/



/* Initialize the lpj field in the acpu_freq_tbl. */

static void __init lpj_init(void)

{

	int i;

	const struct clkctl_acpu_speed *base_clk = drv_state.current_speed;

	for (i = 0; acpu_freq_tbl[i].a11clk_khz; i++) {

		acpu_freq_tbl[i].lpj = cpufreq_scale(loops_per_jiffy,

						base_clk->a11clk_khz,

						acpu_freq_tbl[i].a11clk_khz);

	}

}



void __init msm_acpu_clock_init(struct msm_acpu_clock_platform_data *clkdata)

{

	pr_info("acpu_clock_init()\n");



	ebi1_clk = clk_get(NULL, "ebi1_clk");



	mutex_init(&drv_state.lock);

	drv_state.acpu_switch_time_us = clkdata->acpu_switch_time_us;

	drv_state.max_speed_delta_khz = clkdata->max_speed_delta_khz;

	drv_state.vdd_switch_time_us = clkdata->vdd_switch_time_us;

	drv_state.power_collapse_khz = clkdata->power_collapse_khz;

	drv_state.wait_for_irq_khz = clkdata->wait_for_irq_khz;

	acpuclk_init();

	lpj_init();

#ifdef CONFIG_CPU_FREQ_TABLE

	cpufreq_frequency_table_get_attr(freq_table, smp_processor_id());

#endif

}

arch/arm/mach-msm/acpuclock.h

deleted100644 → 0
+0 −32
Original line number Diff line number Diff line 
/* arch/arm/mach-msm/acpuclock.h

 *

 * MSM architecture clock driver header

 *

 * Copyright (C) 2007 Google, Inc.

 * Copyright (c) 2007 QUALCOMM Incorporated

 * Author: San Mehat <san@android.com>

 *

 * This software is licensed under the terms of the GNU General Public

 * License version 2, as published by the Free Software Foundation, and

 * may be copied, distributed, and modified under those terms.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 */



#ifndef __ARCH_ARM_MACH_MSM_ACPUCLOCK_H

#define __ARCH_ARM_MACH_MSM_ACPUCLOCK_H



int acpuclk_set_rate(unsigned long rate, int for_power_collapse);

unsigned long acpuclk_get_rate(void);

uint32_t acpuclk_get_switch_time(void);

unsigned long acpuclk_wait_for_irq(void);

unsigned long acpuclk_power_collapse(void);

unsigned long acpuclk_get_wfi_rate(void);





#endif

arch/arm/mach-msm/board-mahimahi.c

+0 −1
Original line number Diff line number Diff line
@@ -30,7 +30,6 @@ 


#include <mach/board.h>

#include <mach/hardware.h>

#include <mach/system.h>



#include "board-mahimahi.h"

#include "devices.h"

arch/arm/mach-msm/board-msm7x27.c

deleted100644 → 0
+0 −170
Original line number Diff line number Diff line 
/*

 * Copyright (C) 2007 Google, Inc.

 * Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.

 * Author: Brian Swetland <swetland@google.com>

 *

 * This software is licensed under the terms of the GNU General Public

 * License version 2, as published by the Free Software Foundation, and

 * may be copied, distributed, and modified under those terms.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 *

 */

#include <linux/gpio.h>

#include <linux/kernel.h>

#include <linux/init.h>

#include <linux/platform_device.h>

#include <linux/input.h>

#include <linux/io.h>

#include <linux/delay.h>

#include <linux/power_supply.h>



#include <mach/hardware.h>

#include <asm/mach-types.h>

#include <asm/mach/arch.h>

#include <asm/mach/map.h>

#include <asm/mach/flash.h>

#include <asm/setup.h>

#ifdef CONFIG_CACHE_L2X0

#include <asm/hardware/cache-l2x0.h>

#endif



#include <mach/vreg.h>

#include <mach/mpp.h>

#include <mach/board.h>

#include <mach/msm_iomap.h>



#include <linux/mtd/nand.h>

#include <linux/mtd/partitions.h>



#include "devices.h"

#include "socinfo.h"

#include "clock.h"



static struct resource smc91x_resources[] = {

	[0] = {

		.start	= 0x9C004300,

		.end	= 0x9C0043ff,

		.flags	= IORESOURCE_MEM,

	},

	[1] = {

		.start	= MSM_GPIO_TO_INT(132),

		.end	= MSM_GPIO_TO_INT(132),

		.flags	= IORESOURCE_IRQ,

	},

};



static struct platform_device smc91x_device = {

	.name		= "smc91x",

	.id		= 0,

	.num_resources	= ARRAY_SIZE(smc91x_resources),

	.resource	= smc91x_resources,

};



static struct platform_device *devices[] __initdata = {

	&msm_device_uart3,

	&msm_device_smd,

	&msm_device_dmov,

	&msm_device_nand,

	&smc91x_device,

};



extern struct sys_timer msm_timer;



static void __init msm7x2x_init_irq(void)

{

	msm_init_irq();

}



static void __init msm7x2x_init(void)

{

	if (socinfo_init() < 0)

		BUG();



	if (machine_is_msm7x25_ffa() || machine_is_msm7x27_ffa()) {

		smc91x_resources[0].start = 0x98000300;

		smc91x_resources[0].end = 0x980003ff;

		smc91x_resources[1].start = MSM_GPIO_TO_INT(85);

		smc91x_resources[1].end = MSM_GPIO_TO_INT(85);

		if (gpio_tlmm_config(GPIO_CFG(85, 0,

					      GPIO_INPUT,

					      GPIO_PULL_DOWN,

					      GPIO_2MA),

				     GPIO_ENABLE)) {

			printk(KERN_ERR

			       "%s: Err: Config GPIO-85 INT\n",

				__func__);

		}

	}



	platform_add_devices(devices, ARRAY_SIZE(devices));

}



static void __init msm7x2x_map_io(void)

{

	msm_map_common_io();

	/* Technically dependent on the SoC but using machine_is

	 * macros since socinfo is not available this early and there

	 * are plans to restructure the code which will eliminate the

	 * need for socinfo.

	 */

	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa())

		msm_clock_init(msm_clocks_7x27, msm_num_clocks_7x27);



	if (machine_is_msm7x25_surf() || machine_is_msm7x25_ffa())

		msm_clock_init(msm_clocks_7x25, msm_num_clocks_7x25);



#ifdef CONFIG_CACHE_L2X0

	if (machine_is_msm7x27_surf() || machine_is_msm7x27_ffa()) {

		/* 7x27 has 256KB L2 cache:

			64Kb/Way and 4-Way Associativity;

			R/W latency: 3 cycles;

			evmon/parity/share disabled. */

		l2x0_init(MSM_L2CC_BASE, 0x00068012, 0xfe000000);

	}

#endif

}



static void __init msm7x2x_init_late(void)

{

	smd_debugfs_init();

}



MACHINE_START(MSM7X27_SURF, "QCT MSM7x27 SURF")

	.atag_offset	= 0x100,

	.map_io		= msm7x2x_map_io,

	.init_irq	= msm7x2x_init_irq,

	.init_machine	= msm7x2x_init,

	.init_late	= msm7x2x_init_late,

	.timer		= &msm_timer,

MACHINE_END



MACHINE_START(MSM7X27_FFA, "QCT MSM7x27 FFA")

	.atag_offset	= 0x100,

	.map_io		= msm7x2x_map_io,

	.init_irq	= msm7x2x_init_irq,

	.init_machine	= msm7x2x_init,

	.init_late	= msm7x2x_init_late,

	.timer		= &msm_timer,

MACHINE_END



MACHINE_START(MSM7X25_SURF, "QCT MSM7x25 SURF")

	.atag_offset	= 0x100,

	.map_io		= msm7x2x_map_io,

	.init_irq	= msm7x2x_init_irq,

	.init_machine	= msm7x2x_init,

	.init_late	= msm7x2x_init_late,

	.timer		= &msm_timer,

MACHINE_END



MACHINE_START(MSM7X25_FFA, "QCT MSM7x25 FFA")

	.atag_offset	= 0x100,

	.map_io		= msm7x2x_map_io,

	.init_irq	= msm7x2x_init_irq,

	.init_machine	= msm7x2x_init,

	.init_late	= msm7x2x_init_late,

	.timer		= &msm_timer,

MACHINE_END