Merge "ARM: dts: msm: Add GPU properties for Cobalt"

/* Copyright (c) 2016, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */

&soc {

	pil_gpu: qcom,kgsl-hyp {

		compatible = "qcom,pil-tz-generic";

		qcom,pas-id = <13>;

		qcom,firmware-name = "a530_zap";

		memory-region = <&peripheral_mem>;

	};

	msm_bus: qcom,kgsl-busmon{

		label = "kgsl-busmon";

		compatible = "qcom,kgsl-busmon";

	};

	gpubw: qcom,gpubw {

		compatible = "qcom,devbw";

		governor = "bw_vbif";

		qcom,src-dst-ports = <26 512>;

		/*

		 * active-only flag is used while registering the bus

		 * governor.It helps release the bus vote when the CPU

		 * subsystem is inactiv3

		 */

		qcom,active-only;

		qcom,bw-tbl =

			<     0 /*  off     */ >,

			<   762 /*  100 MHz */ >,

			<  1144 /*  150 MHz */ >,

			<  1525 /*  200 MHz */ >,

			<  2288 /*  300 MHz */ >,

			<  3143 /*  412 MHz */ >,

			<  4173 /*  547 MHz */ >,

			<  5195 /*  681 MHz */ >,

			<  5859 /*  768 MHz */ >,

			<  7759 /*  1017 MHz */ >,

			<  9887 /*  1296 MHz */ >,

			<  11863 /*  1555 MHz */ >,

			<  13763 /*  1804 MHz */ >;

	};

	msm_gpu: qcom,kgsl-3d0@5000000 {

		label = "kgsl-3d0";

		compatible = "qcom,kgsl-3d0", "qcom,kgsl-3d";

		status = "ok";

		reg = <0x5000000 0x40000>;

		reg-names = "kgsl_3d0_reg_memory";

		interrupts = <0 300 0>;

		interrupt-names = "kgsl_3d0_irq";

		qcom,id = <0>;

		qcom,chipid = <0x05040000>;

		qcom,gpu-efuse-leakage = <0x00070130 24>;

		qcom,base-leakage-coefficient = <34>;

		qcom,lm-limit = <6000>;

		qcom,initial-pwrlevel = <4>;

		qcom,idle-timeout = <8>; //<HZ/12>

		/*

		 * Timeout to enter deeper power saving state

		 * from NAP.

		 */

		qcom,deep-nap-timeout = <2>; //<HZ/50>

		qcom,strtstp-sleepwake;

		clocks = <&clock_gpu clk_gpucc_gfx3d_clk>,

			<&clock_gcc clk_gcc_gpu_cfg_ahb_clk>,

			<&clock_gpu clk_gpucc_rbbmtimer_clk>,

			<&clock_gcc clk_gcc_bimc_gfx_clk>,

			<&clock_gcc clk_gcc_gpu_bimc_gfx_clk>,

			<&clock_gpu clk_gpucc_gfx3d_isense_clk>,

			<&clock_gpu clk_gpucc_rbcpr_clk>;

		clock-names = "core_clk", "iface_clk", "rbbmtimer_clk",

			"mem_clk", "mem_iface_clk", "isense_clk", "rbcpr_clk";

		/* Bus Scale Settings */

		qcom,gpubw-dev = <&gpubw>;

		qcom,bus-control;

		qcom,msm-bus,name = "grp3d";

		qcom,msm-bus,num-cases = <13>;

		qcom,msm-bus,num-paths = <1>;

		qcom,msm-bus,vectors-KBps =

				<26 512 0 0>,

				<26 512 0 800000>,      // 1 bus=100

				<26 512 0 1200000>,     // 2 bus=150

				<26 512 0 1600000>,     // 3 bus=200

				<26 512 0 2400000>,     // 4 bus=300

				<26 512 0 3296000>,     // 5 bus=412

				<26 512 0 4376000>,     // 6 bus=547

				<26 512 0 5448000>,     // 7 bus=681

				<26 512 0 6144000>,     // 8 bus=768

				<26 512 0 8136000>,     // 9 bus=1017

				<26 512 0 10368000>,    // 10 bus=1296

				<26 512 0 12440000>,    // 11 bus=1555

				<26 512 0 14432000>;    // 12 bus=1804

		/* GDSC regulator names */

		regulator-names = "vddcx", "vdd";

		/* GDSC oxili regulators */

		vddcx-supply = <&gdsc_gpu_cx>;

		vdd-supply = <&gdsc_gpu_gx>;

		/* Power levels */

		qcom,gpu-pwrlevels {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "qcom,gpu-pwrlevels";

			qcom,gpu-pwrlevel@0 {

				reg = <0>;

				qcom,gpu-freq = <700000000>;

				qcom,bus-freq = <12>;

				qcom,bus-min = <11>;

				qcom,bus-max = <12>;

			};

			qcom,gpu-pwrlevel@1 {

				reg = <1>;

				qcom,gpu-freq = <560000000>;

				qcom,bus-freq = <11>;

				qcom,bus-min = <10>;

				qcom,bus-max = <12>;

			};

			qcom,gpu-pwrlevel@2 {

				reg = <2>;

				qcom,gpu-freq = <460000000>;

				qcom,bus-freq = <10>;

				qcom,bus-min = <9>;

				qcom,bus-max = <11>;

			};

			qcom,gpu-pwrlevel@3 {

				reg = <3>;

				qcom,gpu-freq = <360000000>;

				qcom,bus-freq = <7>;

				qcom,bus-min = <6>;

				qcom,bus-max = <8>;

			};

			qcom,gpu-pwrlevel@4 {

				reg = <4>;

				qcom,gpu-freq = <290000000>;

				qcom,bus-freq = <4>;

				qcom,bus-min = <3>;

				qcom,bus-max = <5>;

			};

			qcom,gpu-pwrlevel@5 {

				reg = <5>;

				qcom,gpu-freq = <180000000>;

				qcom,bus-freq = <3>;

				qcom,bus-min = <1>;

				qcom,bus-max = <4>;

			};

			qcom,gpu-pwrlevel@6 {

				reg = <6>;

				qcom,gpu-freq = <27000000>;

				qcom,bus-freq = <0>;

				qcom,bus-min = <0>;

				qcom,bus-max = <0>;

			};

		};

	};

	kgsl_msm_iommu: qcom,kgsl-iommu {

		compatible = "qcom,kgsl-smmu-v2";

		reg = <0x05040000 0x10000>;

		qcom,protect = <0x40000 0x10000>;

		qcom,micro-mmu-control = <0x6000>;

		clocks =<&clock_gcc clk_gcc_gpu_cfg_ahb_clk>,

			<&clock_gcc clk_gcc_bimc_gfx_clk>,

			<&clock_gcc clk_gcc_gpu_bimc_gfx_clk>;

		clock-names = "iface_clk", "mem_clk", "mem_iface_clk";

		qcom,secure_align_mask = <0xfff>;

		qcom,retention;

		qcom,hyp_secure_alloc;

		gfx3d_user: gfx3d_user {

			compatible = "qcom,smmu-kgsl-cb";

			label = "gfx3d_user";

			iommus = <&kgsl_smmu 0>;

			qcom,gpu-offset = <0x48000>;

		};

		gfx3d_secure: gfx3d_secure {

			compatible = "qcom,smmu-kgsl-cb";

			iommus = <&kgsl_smmu 2>;

		};

	};

};

#include "msmcobalt-vidc.dtsi"

#include "msmcobalt-coresight.dtsi"

#include "msmcobalt-bus.dtsi"

#include "msmcobalt-gpu.dtsi"