Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit ad1c53bc authored by Bartlomiej Zolnierkiewicz's avatar Bartlomiej Zolnierkiewicz
Browse files

ide: Documentation/ide/ide.txt fixes 



* "hdx=cyls,heads,sects,wpcom,irq" should be "hdx=cyls,heads,sects".

* "hdx=" is for "x" from 'a' to 'u', "idex=" is for "x" from '0' to '9'.

* "idex=noautotune" is long gone.

* Obsoleted "ide0=" parameters were already removed from the documentation.

Signed-off-by: default avatarBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
parent 9c027c68

Documentation/ide/ide.txt

+3 −9
Original line number Diff line number Diff line
@@ -105,7 +105,7 @@ Drives are normally found by auto-probing and/or examining the CMOS/BIOS data. 
For really weird situations, the apparent (fdisk) geometry can also be specified

on the kernel "command line" using LILO.  The format of such lines is:



	hdx=cyls,heads,sects,wpcom,irq

	hdx=cyls,heads,sects

or	hdx=cdrom



where hdx can be any of hda through hdh, Three values are required
@@ -214,9 +214,9 @@ driver using the "options=" keyword to insmod, while replacing any ',' with 
Summary of ide driver parameters for kernel command line

--------------------------------------------------------



 "hdx="  is recognized for all "x" from "a" to "h", such as "hdc".

 "hdx="  is recognized for all "x" from "a" to "u", such as "hdc".



 "idex=" is recognized for all "x" from "0" to "3", such as "ide1".

 "idex=" is recognized for all "x" from "0" to "9", such as "ide1".



 "hdx=noprobe"		: drive may be present, but do not probe for it
@@ -233,8 +233,6 @@ Summary of ide driver parameters for kernel command line 
 "hdx=remap63"		: remap the drive: add 63 to all sector numbers

			  (for DM OnTrack)



 "idex=noautotune"	: driver will NOT attempt to tune interface speed



 "hdx=autotune"		: driver will attempt to tune interface speed

			  to the fastest PIO mode supported,

			  if possible for this drive only.
@@ -282,10 +280,6 @@ Summary of ide driver parameters for kernel command line 


 "ide=reverse"		: formerly called to pci sub-system, but now local.



The following are valid ONLY on ide0, which usually corresponds

to the first ATA interface found on the particular host, and the defaults for

the base,ctl ports must not be altered.



 "ide=doubler"		: probe/support IDE doublers on Amiga



There may be more options than shown -- use the source, Luke!