ARM: OMAP: remove plat/clock.h

#include <asm/mach/map.h>

#include <mach/mux.h>

#include <plat/clock.h>

#include <mach/hardware.h>

#include <mach/usb.h>

#include "common.h"

#include "clock.h"

#include "mmc.h"

#define ADS7846_PENDOWN_GPIO	15

#include <plat/cpu.h>

#include <plat/usb.h>

#include <plat/clock.h>

#include <plat/clkdev_omap.h>

#include <mach/hardware.h>

#define __ARCH_ARM_MACH_OMAP1_CLOCK_H

#include <linux/clk.h>

#include <linux/list.h>

#include <plat/clock.h>

struct module;

struct clk;

/* Temporary, needed during the common clock framework conversion */

#define __clk_get_name(clk)	(clk->name)

#define __clk_get_parent(clk)	(clk->parent)

#define __clk_get_rate(clk)	(clk->rate)

/**

 * struct clkops - some clock function pointers

 * @enable: fn ptr that enables the current clock in hardware

 * @disable: fn ptr that enables the current clock in hardware

 * @find_idlest: function returning the IDLEST register for the clock's IP blk

 * @find_companion: function returning the "companion" clk reg for the clock

 * @allow_idle: fn ptr that enables autoidle for the current clock in hardware

 * @deny_idle: fn ptr that disables autoidle for the current clock in hardware

 *

 * A "companion" clk is an accompanying clock to the one being queried

 * that must be enabled for the IP module connected to the clock to

 * become accessible by the hardware.  Neither @find_idlest nor

 * @find_companion should be needed; that information is IP

 * block-specific; the hwmod code has been created to handle this, but

 * until hwmod data is ready and drivers have been converted to use PM

 * runtime calls in place of clk_enable()/clk_disable(), @find_idlest and

 * @find_companion must, unfortunately, remain.

 */

struct clkops {

	int			(*enable)(struct clk *);

	void			(*disable)(struct clk *);

	void			(*find_idlest)(struct clk *, void __iomem **,

					       u8 *, u8 *);

	void			(*find_companion)(struct clk *, void __iomem **,

						  u8 *);

	void			(*allow_idle)(struct clk *);

	void			(*deny_idle)(struct clk *);

};

/*

 * struct clk.flags possibilities

 *

 * XXX document the rest of the clock flags here

 *

 * CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL

 *     bits share the same register.  This flag allows the

 *     omap4_dpllmx*() code to determine which GATE_CTRL bit field

 *     should be used.  This is a temporary solution - a better approach

 *     would be to associate clock type-specific data with the clock,

 *     similar to the struct dpll_data approach.

 */

#define ENABLE_REG_32BIT	(1 << 0)	/* Use 32-bit access */

#define CLOCK_IDLE_CONTROL	(1 << 1)

#define CLOCK_NO_IDLE_PARENT	(1 << 2)

#define ENABLE_ON_INIT		(1 << 3)	/* Enable upon framework init */

#define INVERT_ENABLE		(1 << 4)	/* 0 enables, 1 disables */

#define CLOCK_CLKOUTX2		(1 << 5)

/**

 * struct clk - OMAP struct clk

 * @node: list_head connecting this clock into the full clock list

 * @ops: struct clkops * for this clock

 * @name: the name of the clock in the hardware (used in hwmod data and debug)

 * @parent: pointer to this clock's parent struct clk

 * @children: list_head connecting to the child clks' @sibling list_heads

 * @sibling: list_head connecting this clk to its parent clk's @children

 * @rate: current clock rate

 * @enable_reg: register to write to enable the clock (see @enable_bit)

 * @recalc: fn ptr that returns the clock's current rate

 * @set_rate: fn ptr that can change the clock's current rate

 * @round_rate: fn ptr that can round the clock's current rate

 * @init: fn ptr to do clock-specific initialization

 * @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)

 * @usecount: number of users that have requested this clock to be enabled

 * @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div

 * @flags: see "struct clk.flags possibilities" above

 * @rate_offset: bitshift for rate selection bitfield (OMAP1 only)

 * @src_offset: bitshift for source selection bitfield (OMAP1 only)

 *

 * XXX @rate_offset, @src_offset should probably be removed and OMAP1

 * clock code converted to use clksel.

 *

 * XXX @usecount is poorly named.  It should be "enable_count" or

 * something similar.  "users" in the description refers to kernel

 * code (core code or drivers) that have called clk_enable() and not

 * yet called clk_disable(); the usecount of parent clocks is also

 * incremented by the clock code when clk_enable() is called on child

 * clocks and decremented by the clock code when clk_disable() is

 * called on child clocks.

 *

 * XXX @clkdm, @usecount, @children, @sibling should be marked for

 * internal use only.

 *

 * @children and @sibling are used to optimize parent-to-child clock

 * tree traversals.  (child-to-parent traversals use @parent.)

 *

 * XXX The notion of the clock's current rate probably needs to be

 * separated from the clock's target rate.

 */

struct clk {

	struct list_head	node;

	const struct clkops	*ops;

	const char		*name;

	struct clk		*parent;

	struct list_head	children;

	struct list_head	sibling;	/* node for children */

	unsigned long		rate;

	void __iomem		*enable_reg;

	unsigned long		(*recalc)(struct clk *);

	int			(*set_rate)(struct clk *, unsigned long);

	long			(*round_rate)(struct clk *, unsigned long);

	void			(*init)(struct clk *);

	u8			enable_bit;

	s8			usecount;

	u8			fixed_div;

	u8			flags;

	u8			rate_offset;

	u8			src_offset;

#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)

	struct dentry		*dent;	/* For visible tree hierarchy */

#endif

};

struct clk_functions {

	int		(*clk_enable)(struct clk *clk);

	void		(*clk_disable)(struct clk *clk);

	long		(*clk_round_rate)(struct clk *clk, unsigned long rate);

	int		(*clk_set_rate)(struct clk *clk, unsigned long rate);

	int		(*clk_set_parent)(struct clk *clk, struct clk *parent);

	void		(*clk_allow_idle)(struct clk *clk);

	void		(*clk_deny_idle)(struct clk *clk);

	void		(*clk_disable_unused)(struct clk *clk);

};

extern int mpurate;

extern int clk_init(struct clk_functions *custom_clocks);

extern void clk_preinit(struct clk *clk);

extern int clk_register(struct clk *clk);

extern void clk_reparent(struct clk *child, struct clk *parent);

extern void clk_unregister(struct clk *clk);

extern void propagate_rate(struct clk *clk);

extern void recalculate_root_clocks(void);

extern unsigned long followparent_recalc(struct clk *clk);

extern void clk_enable_init_clocks(void);

unsigned long omap_fixed_divisor_recalc(struct clk *clk);

extern struct clk *omap_clk_get_by_name(const char *name);

extern int omap_clk_enable_autoidle_all(void);

extern int omap_clk_disable_autoidle_all(void);

extern const struct clkops clkops_null;

extern struct clk dummy_ck;

int omap1_clk_init(void);

void omap1_clk_late_init(void);

#include <asm/mach-types.h>  /* for machine_is_* */

#include <plat/clock.h>

#include <plat/cpu.h>

#include <plat/clkdev_omap.h>

#include <asm/mach/time.h>

#include <asm/mach/irq.h>

#include <plat/cpu.h>

#include <plat/clock.h>

#include <mach/tc.h>

#include <mach/mux.h>

#include <plat-omap/dma-omap.h>

#include "../plat-omap/sram.h"

#include "iomap.h"

#include "clock.h"

#include "pm.h"

static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];