Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a0e63123 authored by Felipe Balbi's avatar Felipe Balbi
Browse files

usb: phy: move all PHY drivers to drivers/usb/phy/ 



that's a much more reasonable location for
those drivers. It helps us saving drivers/usb/otg/
for when we actually start adding generic OTG
code.

Also completely delete drivers/usb/otg/ as there's
nothing left there.

Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 110ff6d0

drivers/usb/Kconfig

+0 −2
Original line number Diff line number Diff line
@@ -186,6 +186,4 @@ source "drivers/usb/atm/Kconfig" 


source "drivers/usb/gadget/Kconfig"



source "drivers/usb/otg/Kconfig"



endif # USB_SUPPORT

drivers/usb/Makefile

+0 −2
Original line number Diff line number Diff line
@@ -6,8 +6,6 @@ 


obj-$(CONFIG_USB)		+= core/



obj-$(CONFIG_USB_OTG_UTILS)	+= otg/



obj-$(CONFIG_USB_DWC3)		+= dwc3/



obj-$(CONFIG_USB_MON)		+= mon/

drivers/usb/otg/Kconfig

deleted100644 → 0
+0 −141
Original line number Diff line number Diff line 
#

# USB OTG infrastructure may be needed for peripheral-only, host-only,

# or OTG-capable configurations when OTG transceivers or controllers

# are used.

#



comment "OTG and related infrastructure"



config USB_OTG_UTILS

	bool

	help

	  Select this to make sure the build includes objects from

	  the OTG infrastructure directory.



if USB || USB_GADGET



#

# USB Transceiver Drivers

#

config USB_GPIO_VBUS

	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"

	depends on GENERIC_GPIO

	select USB_OTG_UTILS

	help

	  Provides simple GPIO VBUS sensing for controllers with an

	  internal transceiver via the usb_phy interface, and

	  optionally control of a D+ pullup GPIO as well as a VBUS

	  current limit regulator.



config ISP1301_OMAP

	tristate "Philips ISP1301 with OMAP OTG"

	depends on I2C && ARCH_OMAP_OTG

	select USB_OTG_UTILS

	help

	  If you say yes here you get support for the Philips ISP1301

	  USB-On-The-Go transceiver working with the OMAP OTG controller.

	  The ISP1301 is a full speed USB  transceiver which is used in

	  products including H2, H3, and H4 development boards for Texas

	  Instruments OMAP processors.



	  This driver can also be built as a module.  If so, the module

	  will be called isp1301_omap.



config USB_ULPI

	bool "Generic ULPI Transceiver Driver"

	depends on ARM

	select USB_OTG_UTILS

	help

	  Enable this to support ULPI connected USB OTG transceivers which

	  are likely found on embedded boards.



config USB_ULPI_VIEWPORT

	bool

	depends on USB_ULPI

	help

	  Provides read/write operations to the ULPI phy register set for

	  controllers with a viewport register (e.g. Chipidea/ARC controllers).



config TWL4030_USB

	tristate "TWL4030 USB Transceiver Driver"

	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL4030

	  family chips (including the TWL5030 and TPS659x0 devices).

	  This transceiver supports high and full speed devices plus,

	  in host mode, low speed.



config TWL6030_USB

	tristate "TWL6030 USB Transceiver Driver"

	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL6030

	  family chips. This TWL6030 transceiver has the VBUS and ID GND

	  and OTG SRP events capabilities. For all other transceiver functionality

	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs

	  are hooked to this driver through platform_data structure.

	  The definition of internal PHY APIs are in the mach-omap2 layer.



config NOP_USB_XCEIV

	tristate "NOP USB Transceiver Driver"

	select USB_OTG_UTILS

	help

	  This driver is to be used by all the usb transceiver which are either

	  built-in with usb ip or which are autonomous and doesn't require any

	  phy programming such as ISP1x04 etc.



config USB_MSM_OTG

	tristate "OTG support for Qualcomm on-chip USB controller"

	depends on (USB || USB_GADGET) && ARCH_MSM

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on MSM chips. It

	  handles PHY initialization, clock management, and workarounds

	  required after resetting the hardware and power management.

	  This driver is required even for peripheral only or host only

	  mode configurations.

	  This driver is not supported on boards like trout which

	  has an external PHY.



config AB8500_USB

	tristate "AB8500 USB Transceiver Driver"

	depends on AB8500_CORE

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver in AB8500 chip.

	  This transceiver supports high and full speed devices plus,

	  in host mode, low speed.



config FSL_USB2_OTG

	bool "Freescale USB OTG Transceiver Driver"

	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND

	select USB_OTG

	select USB_OTG_UTILS

	help

	  Enable this to support Freescale USB OTG transceiver.



config USB_MXS_PHY

	tristate "Freescale MXS USB PHY support"

	depends on ARCH_MXC || ARCH_MXS

	select STMP_DEVICE

	select USB_OTG_UTILS

	help

	  Enable this to support the Freescale MXS USB PHY.



	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.



config USB_MV_OTG

	tristate "Marvell USB OTG support"

	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND

	select USB_OTG

	select USB_OTG_UTILS

	help

	  Say Y here if you want to build Marvell USB OTG transciever

	  driver in kernel (including PXA and MMP series). This driver

	  implements role switch between EHCI host driver and gadget driver.



	  To compile this driver as a module, choose M here.



endif # USB || OTG

drivers/usb/otg/Makefile

deleted100644 → 0
+0 −21
Original line number Diff line number Diff line 
#

# OTG infrastructure and transceiver drivers

#



ccflags-$(CONFIG_USB_DEBUG)		:= -DDEBUG

ccflags-$(CONFIG_USB_GADGET_DEBUG)	+= -DDEBUG



# transceiver drivers

obj-$(CONFIG_USB_GPIO_VBUS)	+= gpio_vbus.o

obj-$(CONFIG_ISP1301_OMAP)	+= isp1301_omap.o

obj-$(CONFIG_TWL4030_USB)	+= twl4030-usb.o

obj-$(CONFIG_TWL6030_USB)	+= twl6030-usb.o

obj-$(CONFIG_NOP_USB_XCEIV)	+= nop-usb-xceiv.o

obj-$(CONFIG_USB_ULPI)		+= ulpi.o

obj-$(CONFIG_USB_ULPI_VIEWPORT)	+= ulpi_viewport.o

obj-$(CONFIG_USB_MSM_OTG)	+= msm_otg.o

obj-$(CONFIG_AB8500_USB)	+= ab8500-usb.o

fsl_usb2_otg-objs		:= fsl_otg.o otg_fsm.o

obj-$(CONFIG_FSL_USB2_OTG)	+= fsl_usb2_otg.o

obj-$(CONFIG_USB_MXS_PHY)	+= mxs-phy.o

obj-$(CONFIG_USB_MV_OTG)	+= mv_otg.o

drivers/usb/phy/Kconfig

+151 −17
Original line number Diff line number Diff line
@@ -4,6 +4,73 @@ 
comment "USB Physical Layer drivers"

	depends on USB || USB_GADGET



config USB_OTG_UTILS

	bool

	help

	  Select this to make sure the build includes objects from

	  the OTG infrastructure directory.



if USB || USB_GADGET



#

# USB Transceiver Drivers

#

config AB8500_USB

	tristate "AB8500 USB Transceiver Driver"

	depends on AB8500_CORE

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver in AB8500 chip.

	  This transceiver supports high and full speed devices plus,

	  in host mode, low speed.



config FSL_USB2_OTG

	bool "Freescale USB OTG Transceiver Driver"

	depends on USB_EHCI_FSL && USB_FSL_USB2 && USB_SUSPEND

	select USB_OTG

	select USB_OTG_UTILS

	help

	  Enable this to support Freescale USB OTG transceiver.



config ISP1301_OMAP

	tristate "Philips ISP1301 with OMAP OTG"

	depends on I2C && ARCH_OMAP_OTG

	select USB_OTG_UTILS

	help

	  If you say yes here you get support for the Philips ISP1301

	  USB-On-The-Go transceiver working with the OMAP OTG controller.

	  The ISP1301 is a full speed USB  transceiver which is used in

	  products including H2, H3, and H4 development boards for Texas

	  Instruments OMAP processors.



	  This driver can also be built as a module.  If so, the module

	  will be called isp1301_omap.



config MV_U3D_PHY

	bool "Marvell USB 3.0 PHY controller Driver"

	depends on USB_MV_U3D

	select USB_OTG_UTILS

	help

	  Enable this to support Marvell USB 3.0 phy controller for Marvell

	  SoC.



config NOP_USB_XCEIV

	tristate "NOP USB Transceiver Driver"

	select USB_OTG_UTILS

	help

	  This driver is to be used by all the usb transceiver which are either

	  built-in with usb ip or which are autonomous and doesn't require any

	  phy programming such as ISP1x04 etc.



config OMAP_CONTROL_USB

	tristate "OMAP CONTROL USB Driver"

	help

	  Enable this to add support for the USB part present in the control

	  module. This driver has API to power on the USB2 PHY and to write to

	  the mailbox. The mailbox is present only in omap4 and the register to

	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an

	  additional register to power on USB3 PHY.



config OMAP_USB2

	tristate "OMAP USB2 PHY Driver"

	depends on ARCH_OMAP2PLUS
@@ -25,14 +92,45 @@ config OMAP_USB3 
	  This driver interacts with the "OMAP Control USB Driver" to power

	  on/off the PHY.



config OMAP_CONTROL_USB

	tristate "OMAP CONTROL USB Driver"

config SAMSUNG_USBPHY

	bool "Samsung USB PHY controller Driver"

	depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS

	select USB_OTG_UTILS

	help

	  Enable this to add support for the USB part present in the control

	  module. This driver has API to power on the USB2 PHY and to write to

	  the mailbox. The mailbox is present only in omap4 and the register to

	  power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an

	  additional register to power on USB3 PHY.

	  Enable this to support Samsung USB phy controller for samsung

	  SoCs.



config TWL4030_USB

	tristate "TWL4030 USB Transceiver Driver"

	depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL4030

	  family chips (including the TWL5030 and TPS659x0 devices).

	  This transceiver supports high and full speed devices plus,

	  in host mode, low speed.



config TWL6030_USB

	tristate "TWL6030 USB Transceiver Driver"

	depends on TWL4030_CORE && OMAP_USB2 && USB_MUSB_OMAP2PLUS

	select USB_OTG_UTILS

	help

	  Enable this to support the USB OTG transceiver on TWL6030

	  family chips. This TWL6030 transceiver has the VBUS and ID GND

	  and OTG SRP events capabilities. For all other transceiver functionality

	  UTMI PHY is embedded in OMAP4430. The internal PHY configurations APIs

	  are hooked to this driver through platform_data structure.

	  The definition of internal PHY APIs are in the mach-omap2 layer.



config USB_GPIO_VBUS

	tristate "GPIO based peripheral-only VBUS sensing 'transceiver'"

	depends on GENERIC_GPIO

	select USB_OTG_UTILS

	help

	  Provides simple GPIO VBUS sensing for controllers with an

	  internal transceiver via the usb_phy interface, and

	  optionally control of a D+ pullup GPIO as well as a VBUS

	  current limit regulator.



config USB_ISP1301

	tristate "NXP ISP1301 USB transceiver support"
@@ -46,13 +144,40 @@ config USB_ISP1301 
	  To compile this driver as a module, choose M here: the

	  module will be called isp1301.



config MV_U3D_PHY

	bool "Marvell USB 3.0 PHY controller Driver"

	depends on USB_MV_U3D

config USB_MSM_OTG

	tristate "OTG support for Qualcomm on-chip USB controller"

	depends on (USB || USB_GADGET) && ARCH_MSM

	select USB_OTG_UTILS

	help

	  Enable this to support Marvell USB 3.0 phy controller for Marvell

	  SoC.

	  Enable this to support the USB OTG transceiver on MSM chips. It

	  handles PHY initialization, clock management, and workarounds

	  required after resetting the hardware and power management.

	  This driver is required even for peripheral only or host only

	  mode configurations.

	  This driver is not supported on boards like trout which

	  has an external PHY.



config USB_MV_OTG

	tristate "Marvell USB OTG support"

	depends on USB_EHCI_MV && USB_MV_UDC && USB_SUSPEND

	select USB_OTG

	select USB_OTG_UTILS

	help

	  Say Y here if you want to build Marvell USB OTG transciever

	  driver in kernel (including PXA and MMP series). This driver

	  implements role switch between EHCI host driver and gadget driver.



	  To compile this driver as a module, choose M here.



config USB_MXS_PHY

	tristate "Freescale MXS USB PHY support"

	depends on ARCH_MXC || ARCH_MXS

	select STMP_DEVICE

	select USB_OTG_UTILS

	help

	  Enable this to support the Freescale MXS USB PHY.



	  MXS Phy is used by some of the i.MX SoCs, for example imx23/28/6x.



config USB_RCAR_PHY

	tristate "Renesas R-Car USB phy support"
@@ -66,10 +191,19 @@ config USB_RCAR_PHY 
	  To compile this driver as a module, choose M here: the

	  module will be called rcar-phy.



config SAMSUNG_USBPHY

	bool "Samsung USB PHY controller Driver"

	depends on USB_S3C_HSOTG || USB_EHCI_S5P || USB_OHCI_EXYNOS

config USB_ULPI

	bool "Generic ULPI Transceiver Driver"

	depends on ARM

	select USB_OTG_UTILS

	help

	  Enable this to support Samsung USB phy controller for samsung

	  SoCs.
 
	  Enable this to support ULPI connected USB OTG transceivers which

	  are likely found on embedded boards.



config USB_ULPI_VIEWPORT

	bool

	depends on USB_ULPI

	help

	  Provides read/write operations to the ULPI phy register set for

	  controllers with a viewport register (e.g. Chipidea/ARC controllers).



endif # USB || OTG