Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit a00ae34a authored by Ira Snyder's avatar Ira Snyder Committed by Dan Williams
Browse files

fsldma: make halt behave nicely on all supported controllers 



The original dma_halt() function set the CA (channel abort) bit on both
the 83xx and 85xx controllers. This is incorrect on the 83xx, where this
bit means TEM (transfer error mask) instead. The 83xx doesn't support
channel abort, so we only do this operation on 85xx.

Signed-off-by: default avatarIra W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
parent dc8d4091

drivers/dma/fsldma.c

+16 −3
Original line number Diff line number Diff line
@@ -221,13 +221,26 @@ static void dma_halt(struct fsldma_chan *chan) 
	u32 mode;

	int i;



	/* read the mode register */

	mode = DMA_IN(chan, &chan->regs->mr, 32);



	/*

	 * The 85xx controller supports channel abort, which will stop

	 * the current transfer. On 83xx, this bit is the transfer error

	 * mask bit, which should not be changed.

	 */

	if ((chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {

		mode |= FSL_DMA_MR_CA;

		DMA_OUT(chan, &chan->regs->mr, mode, 32);



	mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN | FSL_DMA_MR_CA);

		mode &= ~FSL_DMA_MR_CA;

	}



	/* stop the DMA controller */

	mode &= ~(FSL_DMA_MR_CS | FSL_DMA_MR_EMS_EN);

	DMA_OUT(chan, &chan->regs->mr, mode, 32);



	/* wait for the DMA controller to become idle */

	for (i = 0; i < 100; i++) {

		if (dma_is_idle(chan))

			return;