Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 945f34af authored by Wei Ding's avatar Wei Ding Committed by Gerrit - the friendly Code Review server
Browse files

ARM: dts: msm: Add camera dtsi for 8996 DTP 



Add camera sensor, actuator and flash node in the
dtsi file for 8996 DTP deives.

Change-Id: I6035f8dd393bc9175280dd45c236e384db17b457
Signed-off-by: default avatarWei Ding <weiding@codeaurora.org>
parent 692f4191

arch/arm/boot/dts/qcom/msm8996-camera-sensor-dtp.dtsi

0 → 100644
+164 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2015 The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



&soc {

	led_flash0: qcom,camera-flash {

		cell-index = <0>;

		compatible = "qcom,camera-flash";

		qcom,flash-source = <&pmi8994_flash0 &pmi8994_flash1>;

		qcom,torch-source = <&pmi8994_torch0 &pmi8994_torch1>;

		qcom,switch-source = <&pmi8994_switch>;

	};

};



&cci {

	actuator0: qcom,actuator@0 {

		cell-index = <0>;

		reg = <0x0>;

		compatible = "qcom,actuator";

		qcom,cci-master = <0>;

		cam_vaf-supply = <&pm8994_l23>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	actuator1: qcom,actuator@1 {

		cell-index = <1>;

		reg = <0x1>;

		compatible = "qcom,actuator";

		qcom,cci-master = <1>;

		cam_vaf-supply = <&pm8994_l23>;

		qcom,cam-vreg-name = "cam_vaf";

		qcom,cam-vreg-min-voltage = <2800000>;

		qcom,cam-vreg-max-voltage = <2800000>;

		qcom,cam-vreg-op-mode = <100000>;

	};



	qcom,camera@0 {

		cell-index = <0>;

		compatible = "qcom,camera";

		reg = <0x0>;

		qcom,csiphy-sd-index = <0>;

		qcom,csid-sd-index = <0>;

		qcom,mount-angle = <90>;

		qcom,led-flash-src = <&led_flash0>;

		cam_vdig-supply = <&pm8994_s3>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l17>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-max-voltage = <1300000 0 2500000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk0_active

						&cam_sensor_rear_active>;

		pinctrl-1 = <&cam_sensor_mclk0_suspend

						&cam_sensor_rear_suspend>;

		gpios = <&tlmm 13 0>,

			<&tlmm 30 0>;

		qcom,gpio-standby = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK0",

					  "CAM_STANDBY0";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk0_clk_src>,

				<&clock_mmss clk_camss_mclk0_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@1 {

		cell-index = <1>;

		compatible = "qcom,camera";

		reg = <0x1>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		cam_vdig-supply = <&pm8994_l27>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pmi8994_boostbypass>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 3150000>;

		qcom,cam-vreg-max-voltage = <1000000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active

						&cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend

						&cam_sensor_rear2_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 63 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1",

					  "CAM_STANDBY1";

		qcom,sensor-position = <0>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <0>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";

		reg = <0x02>;

		qcom,csiphy-sd-index = <2>;

		qcom,csid-sd-index = <2>;

		qcom,mount-angle = <90>;

		qcom,actuator-src = <&actuator1>;

		cam_vdig-supply = <&pm8994_l27>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pm8994_l29>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-max-voltage = <1000000 0 2800000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk2_active

						&cam_sensor_front_active>;

		pinctrl-1 = <&cam_sensor_mclk2_suspend

						&cam_sensor_front_suspend>;

		gpios = <&tlmm 15 0>,

			<&tlmm 23 0>,

			<&tlmm 26 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-standby = <2>;

		qcom,gpio-req-tbl-num = <0 1 2>;

		qcom,gpio-req-tbl-flags = <1 0 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK2",

					  "CAM_RESET2",

					  "CAM_STANDBY2";

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <0>;

		qcom,cci-master = <1>;

		status = "ok";

		clocks = <&clock_mmss clk_mclk2_clk_src>,

			<&clock_mmss clk_camss_mclk2_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};

};

arch/arm/boot/dts/qcom/msm8996-dtp.dtsi

+1 −0
Original line number Diff line number Diff line
@@ -12,6 +12,7 @@ 


#include "msm8996-pinctrl.dtsi"

#include "msm8996-mdss-panels.dtsi"

#include "msm8996-camera-sensor-dtp.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. MSM8996 DTP";