Loading arch/arm/boot/dts/qcom/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -306,6 +306,8 @@ dtb-$(CONFIG_ARCH_MSM8909) += msm8909-pm8916-mtp.dtb \ apq8009w-1gb-nowgr-swoctp-circpanel.dtb \ msm8909w-bg-wtp-v1.dtb \ msm8909w-bg-wtp-v2.dtb \ apq8009w-bg-wtp-v1.dtb \ apq8009w-bg-wtp-v2.dtb \ apq8009-mtp-wcd9326.dtb \ msm8909-mtp-wcd9326.dtb \ msm8909-mtp-wcd9326-refboard.dtb \ Loading arch/arm/boot/dts/qcom/apq8009w-bg-wtp-v1.dts 0 → 100644 +139 −0 Original line number Diff line number Diff line /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8909-mtp.dtsi" #include "msm8909w-gpu.dtsi" #include "msm8909-pm8916.dtsi" #include "msm8909-pm8916-mtp.dtsi" #include "msm8909w.dtsi" #include "apq8009w-memory.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8009W-PM8916 BLACKGHOST WTP"; compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp"; qcom,msm-id = <265 0>, <301 0>; qcom,board-id = <8 0x10f>; }; &soc { i2c@78b9000 { /* BLSP1 QUP5 */ /delete-node/ synaptics@20; it7260@46 { compatible = "ite,it7260_ts"; reg = <0x46>; interrupt-parent = <&msm_gpio>; interrupts = <98 0x2008>; avdd-supply = <&pm8916_l17>; vdd-supply = <&pm8916_l6>; /* pins used by touchscreen */ pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_ite_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_ite_reset_suspend>; pinctrl-2 = <&ts_release>; ite,reset-gpio = <&msm_gpio 16 0x00>; ite,irq-gpio = <&msm_gpio 98 0x2008>; ite,panel-coords = <0 0 320 320>; ite,display-coords = <0 0 320 320>; ite,reset-delay = <20>; ite,num-fingers = <2>; ite,wakeup; ite,palm-detect-en; ite,palm-detect-keycode = <142>; ite,fw-name = "it7260_fw_050D0014.bin"; ite,cfg-name = "it7260_cfg_62011E01.bin"; ite,avdd-lpm-cur = <3000>; }; }; qcom,msm-ssc-sensors { compatible = "qcom,msm-ssc-sensors"; }; }; &i2c_1 { status = "disabled"; }; &spi_0 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &i2c_2 { status = "disabled"; }; &blsp1_uart1 { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_sleep>; }; /* Pinctrl dt nodes for interrupt and reset gpio for ITE tech controller */ &ts_int_active { mux { pins = "gpio98"; }; config { pins = "gpio98"; }; }; &ts_int_suspend { mux { pins = "gpio98"; }; config { pins = "gpio98"; }; }; &ts_ite_reset_active { mux { pins = "gpio16"; }; config { pins = "gpio16"; }; }; &ts_ite_reset_suspend { mux { pins = "gpio16"; }; config { pins = "gpio16"; }; }; &ts_release { mux { pins = "gpio98", "gpio16"; }; config { pins = "gpio98", "gpio16"; }; }; arch/arm/boot/dts/qcom/apq8009w-bg-wtp-v2.dts 0 → 100644 +104 −0 Original line number Diff line number Diff line /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8909-mtp.dtsi" #include "msm8909w-gpu.dtsi" #include "msm8909w.dtsi" #include "msm8909w-pm660-mtp.dtsi" #include "apq8009w-memory.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8009W-PM660 BLACKGHOST WTP"; compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp"; qcom,msm-id = <265 0>, <301 0>; qcom,board-id = <8 0x10f>; qcom,pmic-id = <0x0001001b 0x0 0x0 0x0>, <0x0001011b 0x0 0x0 0x0>; }; &soc { i2c@78b9000 { /* BLSP1 QUP5 */ synaptics@20 { synaptics,display-coords = <0 0 479 479>; /delete-property/ synaptics,power-down; /delete-property/ synaptics,disable-gpios; synaptics,is_wake; }; it7260@46 { compatible = "ite,it7260_ts"; reg = <0x46>; interrupt-parent = <&msm_gpio>; interrupts = <13 0x2008>; avdd-supply = <&pm8916_l17>; vdd-supply = <&pm8916_l6>; /* pins used by touchscreen */ pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_ite_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_ite_reset_suspend>; pinctrl-2 = <&ts_release>; ite,reset-gpio = <&msm_gpio 12 0x00>; ite,irq-gpio = <&msm_gpio 13 0x2008>; ite,panel-coords = <0 0 320 320>; ite,display-coords = <0 0 320 320>; ite,reset-delay = <20>; ite,num-fingers = <2>; ite,wakeup; ite,palm-detect-en; ite,palm-detect-keycode = <142>; ite,fw-name = "it7260_fw_050D0014.bin"; ite,cfg-name = "it7260_cfg_62011E01.bin"; ite,avdd-lpm-cur = <3000>; }; it7260@46 { /* Update with PM660 regulator handles */ /delete-property/ avdd-supply; /delete-property/ vdd-supply; }; }; qcom,msm-ssc-sensors { compatible = "qcom,msm-ssc-sensors"; }; }; &i2c_1 { status = "disabled"; }; &spi_0 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &i2c_2 { status = "disabled"; }; &sdhc_2 { status = "disabled"; }; &blsp1_uart1 { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_sleep>; }; Loading
arch/arm/boot/dts/qcom/Makefile +2 −0 Original line number Diff line number Diff line Loading @@ -306,6 +306,8 @@ dtb-$(CONFIG_ARCH_MSM8909) += msm8909-pm8916-mtp.dtb \ apq8009w-1gb-nowgr-swoctp-circpanel.dtb \ msm8909w-bg-wtp-v1.dtb \ msm8909w-bg-wtp-v2.dtb \ apq8009w-bg-wtp-v1.dtb \ apq8009w-bg-wtp-v2.dtb \ apq8009-mtp-wcd9326.dtb \ msm8909-mtp-wcd9326.dtb \ msm8909-mtp-wcd9326-refboard.dtb \ Loading
arch/arm/boot/dts/qcom/apq8009w-bg-wtp-v1.dts 0 → 100644 +139 −0 Original line number Diff line number Diff line /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8909-mtp.dtsi" #include "msm8909w-gpu.dtsi" #include "msm8909-pm8916.dtsi" #include "msm8909-pm8916-mtp.dtsi" #include "msm8909w.dtsi" #include "apq8009w-memory.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8009W-PM8916 BLACKGHOST WTP"; compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp"; qcom,msm-id = <265 0>, <301 0>; qcom,board-id = <8 0x10f>; }; &soc { i2c@78b9000 { /* BLSP1 QUP5 */ /delete-node/ synaptics@20; it7260@46 { compatible = "ite,it7260_ts"; reg = <0x46>; interrupt-parent = <&msm_gpio>; interrupts = <98 0x2008>; avdd-supply = <&pm8916_l17>; vdd-supply = <&pm8916_l6>; /* pins used by touchscreen */ pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_ite_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_ite_reset_suspend>; pinctrl-2 = <&ts_release>; ite,reset-gpio = <&msm_gpio 16 0x00>; ite,irq-gpio = <&msm_gpio 98 0x2008>; ite,panel-coords = <0 0 320 320>; ite,display-coords = <0 0 320 320>; ite,reset-delay = <20>; ite,num-fingers = <2>; ite,wakeup; ite,palm-detect-en; ite,palm-detect-keycode = <142>; ite,fw-name = "it7260_fw_050D0014.bin"; ite,cfg-name = "it7260_cfg_62011E01.bin"; ite,avdd-lpm-cur = <3000>; }; }; qcom,msm-ssc-sensors { compatible = "qcom,msm-ssc-sensors"; }; }; &i2c_1 { status = "disabled"; }; &spi_0 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &i2c_2 { status = "disabled"; }; &blsp1_uart1 { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_sleep>; }; /* Pinctrl dt nodes for interrupt and reset gpio for ITE tech controller */ &ts_int_active { mux { pins = "gpio98"; }; config { pins = "gpio98"; }; }; &ts_int_suspend { mux { pins = "gpio98"; }; config { pins = "gpio98"; }; }; &ts_ite_reset_active { mux { pins = "gpio16"; }; config { pins = "gpio16"; }; }; &ts_ite_reset_suspend { mux { pins = "gpio16"; }; config { pins = "gpio16"; }; }; &ts_release { mux { pins = "gpio98", "gpio16"; }; config { pins = "gpio98", "gpio16"; }; };
arch/arm/boot/dts/qcom/apq8009w-bg-wtp-v2.dts 0 → 100644 +104 −0 Original line number Diff line number Diff line /* * Copyright (c) 2017, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and * only version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ /dts-v1/; #include "msm8909-mtp.dtsi" #include "msm8909w-gpu.dtsi" #include "msm8909w.dtsi" #include "msm8909w-pm660-mtp.dtsi" #include "apq8009w-memory.dtsi" / { model = "Qualcomm Technologies, Inc. APQ8009W-PM660 BLACKGHOST WTP"; compatible = "qcom,apq8009-mtp", "qcom,apq8009", "qcom,mtp"; qcom,msm-id = <265 0>, <301 0>; qcom,board-id = <8 0x10f>; qcom,pmic-id = <0x0001001b 0x0 0x0 0x0>, <0x0001011b 0x0 0x0 0x0>; }; &soc { i2c@78b9000 { /* BLSP1 QUP5 */ synaptics@20 { synaptics,display-coords = <0 0 479 479>; /delete-property/ synaptics,power-down; /delete-property/ synaptics,disable-gpios; synaptics,is_wake; }; it7260@46 { compatible = "ite,it7260_ts"; reg = <0x46>; interrupt-parent = <&msm_gpio>; interrupts = <13 0x2008>; avdd-supply = <&pm8916_l17>; vdd-supply = <&pm8916_l6>; /* pins used by touchscreen */ pinctrl-names = "pmx_ts_active", "pmx_ts_suspend", "pmx_ts_release"; pinctrl-0 = <&ts_int_active &ts_ite_reset_active>; pinctrl-1 = <&ts_int_suspend &ts_ite_reset_suspend>; pinctrl-2 = <&ts_release>; ite,reset-gpio = <&msm_gpio 12 0x00>; ite,irq-gpio = <&msm_gpio 13 0x2008>; ite,panel-coords = <0 0 320 320>; ite,display-coords = <0 0 320 320>; ite,reset-delay = <20>; ite,num-fingers = <2>; ite,wakeup; ite,palm-detect-en; ite,palm-detect-keycode = <142>; ite,fw-name = "it7260_fw_050D0014.bin"; ite,cfg-name = "it7260_cfg_62011E01.bin"; ite,avdd-lpm-cur = <3000>; }; it7260@46 { /* Update with PM660 regulator handles */ /delete-property/ avdd-supply; /delete-property/ vdd-supply; }; }; qcom,msm-ssc-sensors { compatible = "qcom,msm-ssc-sensors"; }; }; &i2c_1 { status = "disabled"; }; &spi_0 { status = "disabled"; }; &i2c_3 { status = "disabled"; }; &i2c_2 { status = "disabled"; }; &sdhc_2 { status = "disabled"; }; &blsp1_uart1 { status = "ok"; pinctrl-names = "default"; pinctrl-0 = <&uart_console_sleep>; };
