firmware: convert av7110 driver to request_firmware() (9137f05f) · Commits · e / devices / android_kernel_xiaomi_markw

drivers/media/dvb/ttpci/av7110_hw.c

+12 −23

Original line number	Diff line number	Diff line
		@@ -198,29 +198,10 @@ static int load_dram(struct av7110 av7110, u32 data, int len)

		/* we cannot write av7110 DRAM directly, so load a bootloader into
		* the DPRAM which implements a simple boot protocol */
		static u8 bootcode[] = {
		0xea, 0x00, 0x00, 0x0e, 0xe1, 0xb0, 0xf0, 0x0e, 0xe2, 0x5e, 0xf0, 0x04,
		0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x08, 0xe2, 0x5e, 0xf0, 0x04,
		0xe2, 0x5e, 0xf0, 0x04, 0xe2, 0x5e, 0xf0, 0x04, 0x2c, 0x00, 0x00, 0x24,
		0x00, 0x00, 0x00, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x2c, 0x00, 0x00, 0x34,
		0x00, 0x00, 0x00, 0x00, 0xa5, 0xa5, 0x5a, 0x5a, 0x00, 0x1f, 0x15, 0x55,
		0x00, 0x00, 0x00, 0x09, 0xe5, 0x9f, 0xd0, 0x7c, 0xe5, 0x9f, 0x40, 0x74,
		0xe3, 0xa0, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x00, 0xe5, 0x84, 0x00, 0x04,
		0xe5, 0x9f, 0x10, 0x70, 0xe5, 0x9f, 0x20, 0x70, 0xe5, 0x9f, 0x30, 0x64,
		0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe1, 0x51, 0x00, 0x02,
		0xda, 0xff, 0xff, 0xfb, 0xe5, 0x9f, 0xf0, 0x50, 0xe1, 0xd4, 0x10, 0xb0,
		0xe3, 0x51, 0x00, 0x00, 0x0a, 0xff, 0xff, 0xfc, 0xe1, 0xa0, 0x10, 0x0d,
		0xe5, 0x94, 0x30, 0x04, 0xe1, 0xd4, 0x20, 0xb2, 0xe2, 0x82, 0x20, 0x3f,
		0xe1, 0xb0, 0x23, 0x22, 0x03, 0xa0, 0x00, 0x02, 0xe1, 0xc4, 0x00, 0xb0,
		0x0a, 0xff, 0xff, 0xf4, 0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0,
		0xe8, 0xb1, 0x1f, 0xe0, 0xe8, 0xa3, 0x1f, 0xe0, 0xe2, 0x52, 0x20, 0x01,
		0x1a, 0xff, 0xff, 0xf9, 0xe2, 0x2d, 0xdb, 0x05, 0xea, 0xff, 0xff, 0xec,
		0x2c, 0x00, 0x03, 0xf8, 0x2c, 0x00, 0x04, 0x00, 0x9e, 0x00, 0x08, 0x00,
		0x2c, 0x00, 0x00, 0x74, 0x2c, 0x00, 0x00, 0xc0
		};

		int av7110_bootarm(struct av7110 *av7110)
		{
		const struct firmware *fw;
		const char *fw_name = "av7110/bootcode.bin";
		struct saa7146_dev *dev = av7110->dev;
		u32 ret;
		int i;
		@@ -261,7 +242,15 @@ int av7110_bootarm(struct av7110 *av7110)
		//saa7146_setgpio(dev, DEBI_DONE_LINE, SAA7146_GPIO_INPUT);
		//saa7146_setgpio(dev, 3, SAA7146_GPIO_INPUT);

		mwdebi(av7110, DEBISWAB, DPRAM_BASE, bootcode, sizeof(bootcode));
		ret = request_firmware(&fw, fw_name, &dev->pci->dev);
		if (ret) {
		printk(KERN_ERR "dvb-ttpci: Failed to load firmware \"%s\"\n",
		fw_name);
		return ret;
		}

		mwdebi(av7110, DEBISWAB, DPRAM_BASE, fw->data, fw->size);
		release_firmware(fw);
		iwdebi(av7110, DEBINOSWAP, AV7110_BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2);

		if (saa7146_wait_for_debi_done(av7110->dev, 1)) {
		@@ -302,7 +291,7 @@ int av7110_bootarm(struct av7110 *av7110)
		av7110->arm_ready = 1;
		return 0;
		}

		MODULE_FIRMWARE("av7110/bootcode.bin");

		/****************************************************************************
		* DEBI command polling

drivers/media/dvb/ttpci/av7110_hw.h

+2 −1

Original line number	Diff line number	Diff line
		@@ -390,7 +390,8 @@ static inline void iwdebi(struct av7110 *av7110, u32 config, int addr, u32 val,
		}

		/* buffer writes */
		static inline void mwdebi(struct av7110 av7110, u32 config, int addr, u8 val, int count)
		static inline void mwdebi(struct av7110 *av7110, u32 config, int addr,
		const u8 *val, int count)
		{
		memcpy(av7110->debi_virt, val, count);
		av7110_debiwrite(av7110, config, addr, 0, count);

firmware/Makefile

+1 −0

Original line number	Diff line number	Diff line
		@@ -37,6 +37,7 @@ fw-shipped-$(CONFIG_COMPUTONE) += intelliport2.bin
		fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
		cxgb3/t3c_psram-1.1.0.bin \
		cxgb3/t3fw-7.1.0.bin
		fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
		fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
		fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
		e100/d102e_ucode.bin

firmware/WHENCE

+10 −0

Original line number	Diff line number	Diff line
		@@ -632,3 +632,13 @@ Licence: Unknown
		Found in hex form in kernel source.

		--------------------------------------------------------------------------

		Driver: DVB AV7110 -- AV7110 cards

		File: av7110/bootcode.bin

		Licence: GPLv2 or later

		ARM assembly source code available at http://www.linuxtv.org/downloads/firmware/Boot.S

		--------------------------------------------------------------------------

firmware/av7110/Boot.S

0 → 100644

+109 −0

Original line number	Diff line number	Diff line
		/*
		Boot.S: boot loader for Siemens DVB-S card

		Copyright (C) 2001 Convergence integrated media GmbH
		Written by Ralph Metzler
		<rjkm@convergence.de>
		Copyright (C) 2006 Matthieu CASTET <castet.mattheiu@free.fr>

		This program is free software; you can redistribute it and/or
		modify it under the terms of the GNU General Public License
		as published by the Free Software Foundation; either version 2
		of the License, or (at your option) any later version.

		This program is distributed in the hope that it will be useful,
		but WITHOUT ANY WARRANTY; without even the implied warranty of
		MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
		GNU General Public License for more details.

		You should have received a copy of the GNU General Public License
		along with this program; if not, write to the Free Software
		Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.

		*/

		/*
		check AV711x_3_1.pdf for some hardware infos
		build it with :
		$ cc -mbig-endian -c Boot.S
		$ ld -Ttext 0x2c000000 -EB -o Boot Boot.o
		$ objcopy -Obinary Boot
		*/

		.text
		.align
		.globl _start
		_start:
		b reset // reset vector
		movs pc, r14 // undefined
		subs pc, r14, #4 // SWI
		subs pc, r14, #4 // prefetch abort
		subs pc, r14, #8 // data abort
		subs pc, r14, #4 // reserved
		subs pc, r14, #4 // IRQ
		subs pc, r14, #4 // FIQ

		.word tbl // table needed by firmware ROM
		tbl: .word (endtbl - tbl)
		.word 0
		.word conf
		endtbl: .word 0
		conf: .word 0xa5a55a5a
		.word 0x001f1555
		.word 0x00000009

		reset: ldr r13, buffer
		ldr r4, flag
		mov r0, #0
		str r0, [r4]
		str r0, [r4, #4]

		ldr r1, wait_address
		ldr r2, flag_address
		ldr r3, sram

		copycode: // copy the code HW Sram
		ldmia r1!, {r5-r12}
		stmia r3!, {r5-r12}
		cmp r1, r2
		ble copycode
		ldr pc, sram // jump to the copied code

		wait: ldrh r1, [r4] // wait for flag!=0
		cmp r1, #0
		beq wait

		mov r1, r13 // buffer address
		ldr r3, [r4,#4] // destaddr

		ldrh r2, [r4,#2] // get segment length
		add r2, r2, #63 // round length to next 64 bytes
		movs r2, r2, lsr #6 // and divide by 64
		moveq r0, #2 // if 0, set flag to 2, else signal
		strh r0, [r4] // that buffer is accepted by setting to 0
		beq wait

		copyloop:
		ldmia r1!, {r5-r12}
		stmia r3!, {r5-r12}
		ldmia r1!, {r5-r12}
		stmia r3!, {r5-r12}
		subs r2, r2, #1
		bne copyloop

		eor r13, r13, #0x1400 // switch to other buffer
		b wait

		// flag is stored at 0x2c0003f8, length at 0x2c0003fa,
		// destaddr at 0x2c0003fc

		flag: .word 0x2c0003f8


		// buffer 1 is at 0x2c000400, buffer 2 at 0x2c001000

		buffer: .word 0x2c000400

		sram: .word 0x9e000800
		wait_address: .word wait
		flag_address: .word flag