Merge "ARM: dts: msm: Add DTP8996 qpnp pins support" (8f631c17) · Commits · e / devices / android_kernel_xiaomi_markw

arch/arm/boot/dts/qcom/batterydata-qrd-skum-4v4-2920mah.dtsi

+1 −1

Original line number	Diff line number	Diff line
		@@ -13,7 +13,7 @@
		qcom,qrd_msm8952_skum_2920mah {
		qcom,max-voltage-uv = <4400000>;
		qcom,nom-batt-capacity-mah = <2920>;
		qcom,batt-id-kohm = <90>;
		qcom,batt-id-kohm = <50 90>;
		qcom,battery-beta = <0>;
		qcom,battery-type = "qrd_msm8952_skum_2920mah";
		qcom,chg-rslow-comp-c1 = <4847657>;

arch/arm/boot/dts/qcom/msm8996-dtp.dtsi

+381 −0

Original line number	Diff line number	Diff line
		@@ -24,6 +24,343 @@
		pinctrl-0 = <&uart_console_active>;
		};

		&i2c_7 {
		smb1351-charger@1d {
		compatible = "qcom,smb1351-charger";
		reg = <0x1d>;
		qcom,parallel-charger;
		qcom,float-voltage-mv = <4450>;
		qcom,recharge-mv = <100>;
		};
		};

		/ {
		qrd_batterydata: qcom,battery-data {
		qcom,batt-id-range-pct = <15>;
		#include "batterydata-qrd-skum-4v4-2920mah.dtsi"
		};
		};

		&pmi8994_fg {
		qcom,battery-data = <&qrd_batterydata>;
		qcom,ext-sense-type;
		};

		&pmi8994_gpios {
		gpio@c700 { /* GPIO 8, lcd_reg_en, 5V boost */
		qcom,mode = <1>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
		qcom,invert = <1>; /* need invert = 0 */
		qcom,master-en = <1>;
		status = "okay";
		};

		gpio@c100 { /* GPIO 2 SPKR_SD_N */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,pull = <5>; /* No Pull */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,master-en = <1>; /* ENABLE GPIO */
		status = "okay";
		};

		gpio@c200 { /* GPIO 3 SPKR_SD_N */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,pull = <5>; /* No Pull */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,master-en = <1>; /* ENABLE GPIO */
		status = "okay";
		};

		gpio@c400 { /* GPIO 5 - USB3 OTG SWITCH EN */
		qcom,mode = <1>; /* Digital output */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* GPIO */
		qcom,master-en = <1>; /* Enable GPIO */
		qcom,invert = <0>; /* Output low initially */
		status = "okay";
		};

		gpio@c900 { /* GPIO 10 - HPH_EN1 */
		qcom,mode = <1>;
		qcom,pull = <5>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <2>;
		qcom,master-en = <1>;
		status = "okay";
		};
		};

		&pmi8994_mpps {
		mpp@a000 { /* MPP 1 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <7>; /* DTEST4 */
		qcom,master-en = <1>; /* Enable MPP */
		status = "okay";
		};

		mpp@a300 { /* MPP 4 */
		/* WLED FET */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,vin-sel = <0>; /* VIN0 */
		qcom,master-en = <1>;
		status = "okay";
		};
		};

		&pm8994_gpios {
		gpio@c700 { /* GPIO 8 - WLAN_EN */
		qcom,mode = <1>; /* Digital output*/
		qcom,pull = <4>; /* Pulldown 10uA */
		qcom,vin-sel = <2>; /* VIN2 */
		qcom,src-sel = <0>; /* GPIO */
		qcom,invert = <0>; /* Invert */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};

		gpio@c800 { /* GPIO 9 - Rome 3.3V control */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* MOS logic */
		qcom,invert = <1>; /* Output high */
		qcom,vin-sel = <0>; /* VPH_PWR */
		qcom,src-sel = <0>; /* Constant */
		qcom,out-strength = <1>; /* High drive strength */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};

		gpio@cd00 { /* GPIO 14 - lcd_bklt_reg_en */
		qcom,mode = <1>; /* DIGITAL OUT */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,invert = <1>; /* output hight initially */
		qcom,vin-sel = <2>; /* 1.8 */
		qcom,src-sel = <0>; /* CONSTANT */
		qcom,out-strength = <1>; /* Low drive strength */
		qcom,master-en = <1>; /* ENABLE GPIO */
		status = "okay";
		};

		gpio@c100 { /* GPIO 2 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
		status = "okay";
		};

		gpio@c300 { /* GPIO 4 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
		status = "okay";
		};

		gpio@c400 { /* GPIO 5 */
		qcom,mode = <0>;
		qcom,pull = <0>;
		qcom,vin-sel = <2>;
		qcom,src-sel = <0>;
		status = "okay";
		};

		gpio@cc00 { /* GPIO 13 - HPH_EN0 */
		qcom,mode = <1>;
		qcom,output-type = <0>;
		qcom,pull = <5>;
		qcom,vin-sel = <2>;
		qcom,out-strength = <1>;
		qcom,src-sel = <2>;
		qcom,master-en = <1>;
		status = "okay";
		};

		gpio@ce00 { /* GPIO 15 */
		qcom,mode = <1>;
		qcom,output-type = <0>;
		qcom,pull = <5>;
		qcom,vin-sel = <2>;
		qcom,out-strength = <1>;
		qcom,src-sel = <2>;
		qcom,master-en = <1>;
		status = "okay";
		};

		gpio@d100 { /* GPIO 18 - Rome Sleep Clock */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,invert = <0>; /* Output low initially */
		qcom,vin-sel = <2>; /* VIN 2 */
		qcom,src-sel = <3>; /* Function 2 */
		qcom,out-strength = <2>; /* Medium */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};

		gpio@d200 { /* GPIO 19 - Rome BT Reset */
		qcom,mode = <1>; /* Digital output*/
		qcom,pull = <4>; /* Pulldown 10uA */
		qcom,vin-sel = <2>; /* VIN2 */
		qcom,src-sel = <0>; /* GPIO */
		qcom,invert = <0>; /* Invert */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};
		};

		&pm8994_mpps {
		mpp@a100 { /* MPP 2 */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		status = "okay";
		};

		mpp@a300 { /* MPP 4 */
		/* HDMI_5v_vreg regulator enable */
		qcom,mode = <1>; /* Digital output */
		qcom,output-type = <0>; /* CMOS logic */
		qcom,vin-sel = <2>; /* S4 1.8V */
		qcom,src-sel = <0>; /* Constant */
		qcom,master-en = <1>; /* Enable GPIO */
		qcom,invert = <0>;
		status = "okay";
		};
		};

		&pmi8994_vadc {
		chan@0 {
		label = "usbin";
		reg = <0>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@1 {
		label = "dcin";
		reg = <1>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <4>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@43 {
		label = "usb_dp";
		reg = <0x43>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};

		chan@44 {
		label = "usb_dm";
		reg = <0x44>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <1>;
		qcom,calibration-type = "absolute";
		qcom,scale-function = <0>;
		qcom,hw-settle-time = <0>;
		qcom,fast-avg-setup = <0>;
		};
		};

		&pm8994_adc_tm {
		chan@73 {
		label = "msm_therm";
		reg = <0x73>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x48>;
		qcom,thermal-node;
		};

		chan@74 {
		label = "emmc_therm";
		reg = <0x74>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x68>;
		qcom,thermal-node;
		};

		chan@75 {
		label = "pa_therm0";
		reg = <0x75>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x70>;
		qcom,thermal-node;
		};

		chan@77 {
		label = "pa_therm1";
		reg = <0x77>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x78>;
		qcom,thermal-node;
		};

		chan@78 {
		label = "quiet_therm";
		reg = <0x78>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <2>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x80>;
		qcom,thermal-node;
		};

		chan@7c {
		label = "xo_therm_buf";
		reg = <0x7c>;
		qcom,decimation = <0>;
		qcom,pre-div-channel-scaling = <0>;
		qcom,calibration-type = "ratiometric";
		qcom,scale-function = <4>;
		qcom,hw-settle-time = <2>;
		qcom,fast-avg-setup = <0>;
		qcom,btm-channel-number = <0x88>;
		qcom,thermal-node;
		};
		};

		&labibb {
		status = "ok";
		qpnp,qpnp-labibb-mode = "lcd";
		@@ -113,3 +450,47 @@
		qcom,panel-supply-entries = <&dsi_panel_pwr_supply>;
		qcom,dcs-cmd-by-left;
		};

		&sdhc_2 {
		status = "disabled";
		};

		&soc {
		i2c@75ba000 {
		synaptics@20 {
		compatible = "synaptics,dsx";
		reg = <0x20>;
		interrupt-parent = <&tlmm>;
		interrupts = <125 0x2008>;
		vdd-supply = <&pm8994_l14>;
		avdd-supply = <&pm8994_l22>;
		pinctrl-names = "pmx_ts_active", "pmx_ts_suspend";
		pinctrl-0 = <&ts_active>;
		pinctrl-1 = <&ts_suspend>;
		synaptics,display-coords = <0 0 1439 2559>;
		synaptics,panel-coords = <0 0 1439 2559>;
		synaptics,reset-gpio = <&tlmm 89 0x00>;
		synaptics,irq-gpio = <&tlmm 125 0x2008>;
		synaptics,disable-gpios;
		synaptics,button-map = <102 139 158>;
		};
		};

		gpio_keys {
		compatible = "gpio-keys";
		input-name = "gpio-keys";

		vol_up {
		label = "volume_up";
		gpios = <&pm8994_gpios 2 0x1>;
		linux,input-type = <1>;
		linux,code = <115>;
		gpio-key,wakeup;
		debounce-interval = <15>;
		};
		};
		};

		&pmi8994_haptics {
		status = "okay";
		};