Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8c9f516b authored by Xu Han's avatar Xu Han Committed by Matt Wagantall
Browse files

ARM: DTS: msm: remove the node for camera mt9m114 



Camera mt9m114 is not used on msm8996. Remove the node.

Change-Id: Ia05486bc5b05e1ccadb90978858c4fbe599543e0
Signed-off-by: default avatarXu Han <hanxu@codeaurora.org>
parent 8983966c

arch/arm/boot/dts/qcom/msm8996-camera-sensor-mtp.dtsi

+0 −40
Original line number Diff line number Diff line
@@ -201,46 +201,6 @@ 
		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@90 {

		compatible = "qcom,mt9m114";

		reg = <0x90>;

		qcom,slave-id = <0x90 0x0 0x2481>;

		qcom,csiphy-sd-index = <1>;

		qcom,csid-sd-index = <1>;

		qcom,mount-angle = <90>;

		qcom,sensor-name = "mt9m114";

		cam_vdig-supply = <&pm8994_l27>;

		cam_vio-supply = <&pm8994_lvs1>;

		cam_vana-supply = <&pmi8994_boostbypass>;

		qcom,cam-vreg-name = "cam_vdig", "cam_vio", "cam_vana";

		qcom,cam-vreg-min-voltage = <1000000 0 3150000>;

		qcom,cam-vreg-max-voltage = <1000000 0 3600000>;

		qcom,cam-vreg-op-mode = <105000 0 80000>;

		qcom,gpio-no-mux = <0>;

		pinctrl-names = "cam_default", "cam_suspend";

		pinctrl-0 = <&cam_sensor_mclk1_active &cam_sensor_rear2_active>;

		pinctrl-1 = <&cam_sensor_mclk1_suspend &cam_sensor_rear2_suspend>;

		gpios = <&tlmm 14 0>,

			<&tlmm 63 0>,

			<&tlmm 62 0>;

		qcom,gpio-reset = <1>;

		qcom,gpio-req-tbl-num = <0 1>;

		qcom,gpio-req-tbl-flags = <1 0>;

		qcom,gpio-req-tbl-label = "CAMIF_MCLK1",

					  "CAM_RESET1";

		qcom,gpio-set-tbl-num = <1 1>;

		qcom,gpio-set-tbl-flags = <0 2>;

		qcom,gpio-set-tbl-delay = <1000 30000>;

		qcom,csi-lane-assign = <0x4321>;

		qcom,csi-lane-mask = <0x3>;

		qcom,sensor-position = <1>;

		qcom,sensor-mode = <1>;

		qcom,cci-master = <0>;

		clocks = <&clock_mmss clk_mclk1_clk_src>,

			<&clock_mmss clk_camss_mclk1_clk>;

		clock-names = "cam_src_clk", "cam_clk";

	};



	qcom,camera@2 {

		cell-index = <2>;

		compatible = "qcom,camera";