Donate to e Foundation | Murena handsets with /e/OS | Own a part of Murena! Learn more

Commit 8c99e75b authored by Vijay Navnath Kamble's avatar Vijay Navnath Kamble
Browse files

ARM: dts: msm: Add DT support for apq8053-lite FEP v2 



Add DT support for apq8053-lite FEP v2 with Mini CCB.
Supports 8" Innolux panel by default.

Change-Id: Iab7ba5a04e61778520c877d4b6cb40530056180c
Signed-off-by: default avatarVijay Navnath Kamble <vkambl@codeaurora.org>
parent 5ef91a4b

Documentation/devicetree/bindings/input/touchscreen/hmxchipset.txt

0 → 100644
+47 −0
Original line number Diff line number Diff line 
Himax Touch Controller



Required properties:



 - compatible		: Should be "himax,hxcommon"

 - reg			: I2C slave address of the device.

 - interrupt-parent	: Parent of interrupt.

 - interrupts		: Configuration of touch panel controller interrupt

			GPIO.

 - interrupt-gpios	: Interrupt gpio which is to provide interrupts to

			host, same as "interrupts" node.

 - reset-gpios		: Reset gpio to control the reset of chip.

 - himax,display-coords	: Display coordinates in pixels. It is a four

			tuple consisting of min x, min y, max x and

			max y values.



Optional properties:



 - avdd-supply		: Power supply needed to power up the device, this is

			for fixed voltage external regulator.

 - vdd-supply		: Power supply needed to power up the device, when use

			external regulator, do not add this property.

 - himax,panel-coords	: Panel coordinates for the chip in pixels.

			It is a four tuple consisting of min x,

			min y, max x and max y values.



Example:

&i2c_3 {

	status = "okay";

	himax_ts@48 {

		compatible = "himax,hxcommon";

		reg = <0x48>;

		interrupt-parent = <&tlmm>;

		interrupts = <65 0x2>;

		vdd-supply = <&pm8953_l10>;

		avdd-supply = <&pm8953_l5>;

		pinctrl-names = "pmx_ts_active","pmx_ts_suspend","pmx_ts_release";

		pinctrl-0 = <&ts_int_active &ts_reset_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		pinctrl-2 = <&ts_release>;

		himax,panel-coords = <0 800 0 1280>;

		himax,display-coords = <0 800 0 1280>;

		himax,irq-gpio = <&tlmm 65 0x2008>;

		//himax,rst-gpio = <&tlmm 64 0x0>;

		report_type = <1>;

	};

};

Documentation/devicetree/bindings/vendor-prefixes.txt

+2 −0
Original line number Diff line number Diff line
@@ -200,3 +200,5 @@ zyxel ZyXEL Communications Corp. 
zarlink	Zarlink Semiconductor

bosch-sensortec»    Bosch Sensortec GmbH

lontium Lontium Semiconductor

himax	Himax Technologies, Inc.

hxcommon	Himax Technologies, Inc.

arch/arm/boot/dts/qcom/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -261,6 +261,7 @@ dtb-$(CONFIG_ARCH_MSM8953) += msm8953-sim.dtb \ 
	apq8053-ext-audio-mtp.dtb \

	apq8053-ext-codec-rcm.dtb \

	apq8053-lite-dragon-v1.0.dtb \

	apq8053-lite-dragon-v2.0.dtb \

	msm8953-cdp-1200p.dtb \

	msm8953-iot-mtp.dtb \

	apq8053-iot-mtp.dtb \

arch/arm/boot/dts/qcom/apq8053-lite-dragon-v2.0.dts

0 → 100644
+28 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



/dts-v1/;



#include "apq8053-lite.dtsi"

#include "apq8053-lite-dragon-v2.0.dtsi"



/ {

	model = "Qualcomm Technologies, Inc. APQ8053 Lite DragonBoard V2.0";

	compatible = "qcom,apq8053-lite-dragonboard",

			"qcom,apq8053", "qcom,dragonboard";

	qcom,board-id = <0x0103000A 0>;

};



&blsp2_uart0 {

	status = "okay";

};

arch/arm/boot/dts/qcom/apq8053-lite-dragon-v2.0.dtsi

0 → 100644
+70 −0
Original line number Diff line number Diff line 
/*

 * Copyright (c) 2018, The Linux Foundation. All rights reserved.

 *

 * This program is free software; you can redistribute it and/or modify

 * it under the terms of the GNU General Public License version 2 and

 * only version 2 as published by the Free Software Foundation.

 *

 * This program is distributed in the hope that it will be useful,

 * but WITHOUT ANY WARRANTY; without even the implied warranty of

 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the

 * GNU General Public License for more details.

 */



#include "apq8053-lite-dragon.dtsi"



&i2c_3 {

	status = "okay";

	himax_ts@48 {

		compatible = "himax,hxcommon";

		reg = <0x48>;

		interrupt-parent = <&tlmm>;

		interrupts = <65 0x2>;

		vdd-supply = <&pm8953_l10>;

		avdd-supply = <&pm8953_l5>;

		pinctrl-names = "pmx_ts_active","pmx_ts_suspend",

					"pmx_ts_release";

		pinctrl-0 = <&ts_int_active &ts_reset_active>;

		pinctrl-1 = <&ts_int_suspend &ts_reset_suspend>;

		pinctrl-2 = <&ts_release>;

		himax,panel-coords = <0 800 0 1280>;

		himax,display-coords = <0 800 0 1280>;

		himax,irq-gpio = <&tlmm 65 0x2008>;

		//himax,rst-gpio = <&tlmm 64 0x0>;

		report_type = <1>;

	};

};



&mdss_dsi {

	hw-config = "single_dsi";

};



&mdss_dsi0 {

	qcom,dsi-pref-prim-pan = <&dsi_boyi_hx83100a_800p_video>;

	pinctrl-names = "mdss_default", "mdss_sleep";

	pinctrl-0 = <&mdss_dsi_active &mdss_te_active>;

	pinctrl-1 = <&mdss_dsi_suspend &mdss_te_suspend>;



	vdd-supply = <&pm8953_l10>;

	vddio-supply = <&pm8953_l6>;

	lab-supply = <&lab_regulator>;

	ibb-supply = <&ibb_regulator>;



	qcom,platform-te-gpio = <&tlmm 24 0>;

	qcom,platform-reset-gpio = <&tlmm 61 0>;

	qcom,platform-bklight-en-gpio = <&tlmm 100 0>;

};



&mdss_dsi1 {

	status = "disabled";

};



&labibb {

	status = "ok";

	qpnp,qpnp-labibb-mode = "lcd";

};



&wled {

	qcom,cons-sync-write-delay-us = <1000>;

	qcom,led-strings-list = [00 01 02 03];

};